Full text of this article is only available in PDF format.

Jonny Andersson, Lars Eliasson (email)

Effects of three harvesting work methods on Harwarder productivity in final felling

Andersson J., Eliasson L. (2004). Effects of three harvesting work methods on Harwarder productivity in final felling. Silva Fennica vol. 38 no. 2 article id 428. https://doi.org/10.14214/sf.428

Abstract

During the last ten years interest in the harwarder has increased, however, studies have concentrated on effects of technical improvements on machine productivity. It has been noted that there is a large potential to increase the productivity through development of suitable work methods. To find efficient work patterns for a harwarder with a turnable loading area, three different harvesting methods were studied in final felling. Three work methods were used. Method 1: the harwarder drove backwards into the stand making a strip road, strip road trees were felled and left on the ground, on the way out of the stand the harwarder cut and processed the trees on both sides of the machine directly into the loading area. Method 2: the harwarder drove forward along the edge of the cut, cutting and processing trees directly into the loading area. Method 3: the harwarder drove forward into the stand and cut and processed strip road trees and trees standing on both sides of the machine directly into the loading area. The most efficient work method was method 2 where the productivity was 13.0 m3 u.b. per E0h (cubic metre under bark per effective hour). The productivities for method 1 and 3 were 12.1 and 11.9 m3 u.b. per E0h, respectively. In addition to work method harwarder productivity was shown to be dependent on load volume, average tree size and hauling distance. The only work elements significantly affected by work methods were processing and movement during processing. The operator had only a few weeks to get used to the machine and even less time to practise on the work methods. Thus, it is probable that the productivity for the studied methods will increase with increasing work experience. Furthermore, as only three work methods were studied, there are still untested work methods. The potential to further improve harwarder work methods is considerable.

Keywords
forwarder; harvester; work method

Author Info
  • Andersson, Swedish University of Agricultural Sciences, Department of Silviculture, S-901 83 Umeå, Sweden E-mail je@nn.se
  • Eliasson, Swedish University of Agricultural Sciences, Department of Silviculture, S-901 83 Umeå, Sweden E-mail lars.eliasson@ssko.slu.se (email)

Received 10 June 2003 Accepted 13 February 2004 Published 31 December 2004

Views 2817

Available at https://doi.org/10.14214/sf.428 | Download PDF

Creative Commons License CC BY-SA 4.0

Register
Click this link to register to Silva Fennica.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content

Your selected articles
Your search results