Current issue: 54(3)

Under compilation: 54(4)

Impact factor 1.683
5-year impact factor 1.950
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles by Eugenio Cavallo

Category: Research article

article id 930, category Research article
Raffaele Spinelli, Eugenio Cavallo, Lars Eliasson, Alessio Facello. (2013). Comparing the efficiency of drum and disc chippers. Silva Fennica vol. 47 no. 2 article id 930. https://doi.org/10.14214/sf.930
The study compared the effect of chipper type on productivity, power demand, fuel consumption and product quality. Tests were conducted on two commercial chipper models, a disc and a drum chipper. Both chippers had the same diameter capacity, were applied to the same tractor and fed with the same feedstock types. Fifteen replications were conducted per machine and for each of four different feedstock types, reaching a total of 120 tests. The disc chipper had a higher energy efficiency and used 19% less fuel per unit product, possibly due to its simpler design, integrating comminuting and discharge system in one synergic device. In contrast, the drum chipper was 8% more productive, since it cut with the same energy all along the length of its knives. The drum chipper produced smaller chips, with a higher incidence of fines. Feedstock type had a strong effect on productivity, energy efficiency and product quality. The effect of feedstock type was mainly related to piece size, and may be stronger than the effect of chipper type. Further studies should determine the effect of blade wear on the relative performance of the two chipper types.
  • Spinelli, CNR IVALSA, Via Madonna del Piano 10, Sesto Fiorentino (FI), Italy ORCID ID:E-mail: spinelli@ivalsa.cnr.it (email)
  • Cavallo, CNR IVALSA, Via Madonna del Piano 10, Sesto Fiorentino (FI), Italy ORCID ID:E-mail: e.cavallo@imamoter.cnr.it
  • Eliasson, Skogforsk, Uppsala Science Park, SE-751 83 Uppsala, Sweden ORCID ID:E-mail: lars.eliasson@skogforsk.se
  • Facello, CNR IVALSA, Via Madonna del Piano 10, Sesto Fiorentino (FI), Italy ORCID ID:E-mail: a.facello@ima.to.cnr.it

Register
Click this link to register for Silva Fennica submission and tracking system.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles

Committee on Publication Ethics A Trusted Community-Governed Archive