Current issue: 53(2)

Under compilation: 53(3)

Impact factor 1.683
5-year impact factor 1.950
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles containing the keyword 'hieskoivu'.

Category: Article

article id 7167, category Article
Veijo Heiskanen. (1966). Tutkimuksia rauduskoivikon karsimisen kannattavuudesta. Acta Forestalia Fennica vol. 81 no. 2 article id 7167. https://doi.org/10.14214/aff.7167
English title: Studies on the profitability of pruning of common birch (Betula pendula) stands.

The objective of the present investigation was to clarify the profitability of pruning silver birch (Betula verrucosa, now Betula pendula Roth) in the growing of raw material for veneer industry. Calculations were made on the grade, value, and price of pruned and untreated butt logs as well as on costs of pruning and the development of pruned trees.

The grade distribution of unpruned veneer butt logs, the grade distribution of the veneer yield, and consequently, the value of veneer yield and log prices at the plant are considerably better than those of average logs. The grade, value and price increased with increasing diameter. The value and price of pruned butt logs depended primarily on the difference between the turning pruning diameters, and their increase with decreasing pruning diameter and increasing turning diameter. The value of pruned butt logs is always considerably higher than that of unpruned logs. The increase in the value correlates to the pruning and turning diameters, and is, for example, in rotary-cut logs which have been pruned when 10 cm in diameter 80–130%.

Pruning increases the stumpage in naturally regenerated silver birch stands on Oxalis-Myrtillus site by 2,000–3,000 Fmk/ha when employed at 20 years of stand age and rotary cutting at 60–80 years of age respectively. The average pruning costs on Oxalis-Myrtillus site are 51–57 Fmk/ha.

The PDF includes a summary English.

  • Heiskanen, ORCID ID:E-mail:
article id 7119, category Article
Paavo J. Ollinmaa. (1960). Eräistä ojitetuilla soilla kasvavan puun fysikaalisista ominaisuuksista. Acta Forestalia Fennica vol. 72 no. 2 article id 7119. https://doi.org/10.14214/aff.7119
English title: Physical properties of wood growing on drained peatlands.

The objective of the investigation was to determine the differences between faultless timber grown on a peatland before and after draining, in respect of compressive strength to the grain, volume weight, and shrinkage. In addition, the influence of the boundary zone between the close-ringed wood formed before draining and the wide-ringed wood produced after draining on strength of the timber was studied. The material consisted of 15 sample trees of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) Karst.), white birch (Betula pubescens Ehrh.) and silver birch (B. Pendula Roth).

The volume weight of wood of the tree species in ascending order is; spruce, pine, white birch, silver birch. The volume weight of Scots pine seems to decrease from the butt end upwards, while no trend was revealed for spruce. In the coniferous trees, the wide-ringed wood formed subsequent to draining was slightly lighter than the close-ringed wood produced prior draining. No distinct trend was seen in the birch species. The volume weight of pine and spruce increased with decreasing width of the growth rings up to a certain limit, after which the conditions inverted.

The compressive strength of the different kinds of wood seems to increase from the butt end upwards, but after height of two meters it begins to decrease considerably. In birch, this point of inversion is in somewhat greater height. In spruce timber, the compressive strength parallel to the grain is lowest for wood which contains exclusively wide-ringed wood formed after draining. The boundary zone between the woods formed before and after draining is very distinguishable, but has no remarkable influence on the compressive strength parallel to the grain. Shrinkage of close-ringed wood is higher in all three principal directions than that of wide-ringed wood. This can be explained by the variations in volume weight and fibrillar orientation of the tracheid walls.

The PDF includes a summary in English.

  • Ollinmaa, ORCID ID:E-mail:
article id 7463, category Article
Paavo J. Ollinmaa. (1955). Koivun vetopuun anatomisesta rakenteesta ja ominaisuuksista. Acta Forestalia Fennica vol. 64 no. 3 article id 7463. https://doi.org/10.14214/aff.7463
English title: On the anatomical structure and properties of the tension wood in birch.

The investigation concerns with the strength of the eccentric growth accompanying formation of tension wood in silver birch  (Betula pendula Roth.) and downy birch (Betula pubescens Ehrh.), behaviour of wood in wood-working machines and its macroscopic characteristics, its microscopic and sub-microscopic structure, chemical composition, resistance against certain chemicals, physical properties, and the strength characteristics of wood.

The most detrimental properties of tension wood used in wood working industry are high longitudinal shrinkage, warping, twisting and checking. The wooliness of the cut is unwanted, for instance, in plywood and furniture. In pulp industry tension wood is better raw material than normal wood because it yields more and purer cellulose than normal wood. However, it has poorer strength properties.

The PDF includes a summary in English.

  • Ollinmaa, ORCID ID:E-mail:
article id 7356, category Article
Peitsa Mikola. (1942). Koivun vesomisesta ja sen metsänhoidollisesta merkityksestä. Acta Forestalia Fennica vol. 50 no. 3 article id 7356. https://doi.org/10.14214/aff.7356
English title: Silvicultural usefulness of sprouting of birch.

Birches’ (Betula sp.) ability to grow sprouts is low. The stump grows root collar and stump shoots, but the stump shoots are not proper stump shoots that will grow from the space between wood and bark. The buds are situated very low in the base, even under the ground. In this study, no actual root shoots could be found. Also the bushy alpine birches seem to be formed from stump and root collar shoots.

In Southern Finland silver birch (Betula pendula Roth) is more common than downy birch (Betula pubescens Ehrh.) in dry upland forest sites, while downy birch is common in fresh mineral soil forests and peatlands. In Northern Finland downy birch is the dominant birch species. Of the two species downy birch has markedly better capacity to form stump and root collar shoots both in Northern and Southern Finland. In general, birches grow sprouts much more strongly in Northern Finland.

Growth of the shoots is fastest during the first year after the felling of the parent tree and slows down gradually. The stump shoots may get separated from the stump when the stump decays, and the decay may also spread to the shoots. It is common that the shoots have no own roots, and die along with the stump. The shoots may have own root system or use roots of the parent tree that have stayed alive, in the latter case decay spreads almost always from the stump to the shoot. Whether the tree was felled with axe or saw had no effect on sprouting, probably because the sprouting buds are situated in the base of the tree. The larger stumps had usually fewer sprouts than smaller stumps. The fertility of the site seemed to have little effect on sprouting, but more moist sites formed more sprouts.

Forest regeneration using sprouts may be possible in peatlands for firewood production. on mineral soil sites birch does not suit for coppicing. The proportion of trees originating from sprouts decreases strongly by the time. Consequently, in Southern Finland sprouts have little effect on regeneration of birch. In Northern Finland sprouting is the most important way of regeneration.

The PDF includes a summary in German.

  • Mikola, ORCID ID:E-mail:
article id 5411, category Article
Eero Paavilainen. (1990). Effect of refertilization of pine and birch stands on a drained fertile mire. Silva Fennica vol. 24 no. 1 article id 5411. https://doi.org/10.14214/sf.a15563

Refertilization with PK, about 15 years after the first fertilizer application, increased tree growth and the amount of nutrients in tree litter in Scots pine (Pinus sylvestris L.) and birch (mainly Betula pubescens Erhr.) stands on a drained fertile mire in Northern Finland (65°34 N’, 25°42’ E). The increase in growth and nutrient contents after refertilization was greatest in the mature pine stand where the application of nitrogen and micronutrients gave an additional response compared to the PK-application.

The PDF includes an abstract in Finnish.

  • Paavilainen, ORCID ID:E-mail:
article id 5266, category Article
Matti Kärkkäinen. (1986). Malli männyn, kuusen ja koivun puuaineen oksaisuudesta. Silva Fennica vol. 20 no. 2 article id 5266. https://doi.org/10.14214/sf.a15445
English title: Model of knottiness of wood material in pine, spruce and birch.

A computer model was developed for predicting knottiness of wood material of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst.) and birch (Betula sp). The prediction included location of knots, their size and quality, i.e. if they are dead or living knots. The model suits best for tree species where branches are born at the base of shoots, in Finland such tree species is Scots pine.

The usefulness of the model was tested in the prediction of knots in wooden elements of joinery industry. According to the results, the shape of cross section affects the surface quality of elements. Especially useful is a quadratic cross section as it increases the probability to get a knotless surface.

The PDF includes an abstract in English.

  • Kärkkäinen, ORCID ID:E-mail:
article id 5255, category Article
Matti Kärkkäinen, Jukka Pietilä, Raili Vihola. (1985). Suomalaisten puulajien iskutaivutuslujuus tuoreena. Silva Fennica vol. 19 no. 4 article id 5255. https://doi.org/10.14214/sf.a15434
English title: Impact bending strength of Finnish tree species in green condition.

There are great impact forces in mechanized harvesting and wood yard in the mills which can cause breaks in timber. The impact strength of timber in green condition was tested in temperatures of +18°C and -18°C using sawn pieces (20 x 20 x 300 mm) of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst.), birch (Betula pendula Roth and B. pubescens Ehrh.), grey alder (Alnus incana L.) and aspen (Populus tremula L.). In addition, unbarked naturally round sticks (length 300 mm, diameter 15 and 35 mm) of the same species were tested.

The impact strength of round sticks was 1.5–4.4 times as great as that of sawn pieces. The reasons are possibly the avoidance of cell breaks at the surface as well as growth stresses. The frozen samples were clearly weaker than the unfrozen ones. As a rule, the impact bending strength increased with increased density of the species. However, the correlation varied greatly between species. If density was kept constant, an increase in the growth ring width decreased the impact strength. The reason may lie in the fracture mechanism.

The PDF includes a summary in English.

  • Kärkkäinen, ORCID ID:E-mail:
  • Pietilä, ORCID ID:E-mail:
  • Vihola, ORCID ID:E-mail:
article id 5233, category Article
Leo Heikurainen. (1985). Verhopuuston vaikutus kuusitaimikon kehitykseen. Silva Fennica vol. 19 no. 1 article id 5233. https://doi.org/10.14214/sf.a15412
English title: The influence of birch nurse crop (Betula pubescens) on the growth of Norway spruce (Picea abies) seedling stands on drained peatlands.

Young Norway spruce (Picea abies (L.) H. Karst.) are susceptible to early summer frost damage. Birch (Betula pubescens Ehrh.) naturally colonize rich or fairly rich drained peatlands after clear cutting, and can provide protection for developing seedlings. The report describes the development of spruce stands after various types of handing of the birch nurse crops.

Different proportions of birch and spruces did not have any influence on the spruce stand production. In cases where the nurse crop stand is removed when the spruce stand age was 20 years and height 4 m the spruce suffered badly but recovered with time, reaching the spruce stand growing under a nurse stand within the next 20 years. The height growth of spruce depends on the density of the nurse stand, especially on fertile sites. The development of diameter growth also depends on the density of the nurse trees. Removal of the nurse stand in spruce stands on the sites concerned should be done when the spruce stand is 20 years old and at the height of 4 m.

The PDF includes a summary in English.

  • Heikurainen, ORCID ID:E-mail:
article id 4962, category Article
Matti Keltikangas, Kustaa Seppälä. (1977). Ojitusalueiden hieskoivikoiden kasvatus taloudellisena vaihtoehtona. Silva Fennica vol. 11 no. 1 article id 4962. https://doi.org/10.14214/sf.a14813
English title: The economics of growing downy birch stands on drained peatlands in Finland.

The aim of this study was to determine under what conditions and with what premises the growing of Betula pubescens Ehrh. is an economically competitive alternative to the growing of Scots pine (Pinus sylvestris L.) in drained peatlands. The basic material consisted of all drainage projects in Ostrobothnia in Western Finland in 1937–38 and 1957–59, according to the archives of the Central Board of Forestry Tapio, including such areas that were at least moderately fertile and had birch dominated young stands or no tree cover. A total of 202 sample plots were measured.

According to the results, the discounted timber yield of the thinned B. pubescens stands is about 10% greater than that of untreated stands. The removing of birch seedlings and the subsequent growing of fully stocked Scots pine is more profitable than growing B. pubescens stands only if the establishment and subsequent development of the pine stand involve no costs. If the site in question is a fertile open drained peatland, establishment of a pine stand is obviously a better financial proposition than a naturally regenerated birch stand. However, if there is already a fully stocked young birch stand on the site, it is more economical to let it grow using a shortish rotation time.

The PDF includes a summary in English.

  • Keltikangas, ORCID ID:E-mail:
  • Seppälä, ORCID ID:E-mail:
article id 4924, category Article
Teklé Kapustinskaité. (1975). Puuston kasvu ja turpeen tuhkapitoisuus ojitetuilla soilla. Silva Fennica vol. 9 no. 3 article id 4924. https://doi.org/10.14214/sf.a14766
English title: Ash content of peatland soils and stand growth in connection with drainage.

The ash content has been found to correlate with the fertility of peatlands. Relationship between height of 80-year-old stands and ash content of peat in topmost 30 cm layer was examined in Lithuanian conditions. On drained peatlands with ash content of peat from 3% to 8% pine stands increase in height. Ash content of peat being about 7% Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) H. Karst.) stands on drained sites are found to be of equal height. Ash content of peat more than 8–9% has no significant effect on growth of pine or spruce stands. Birch (Betula verrucosa (B. Pendula Roth.) and Betula pubescens Erhrh.), stands are less sensitive to ash content of peat compared with other species. Black alder (Alnus glutinosa L. Gaertn.) stands occurred in sites with ash content of peat more than 8–10%. The height of the stands become equal both in drained and undrained sites in the cases where ash content of peat is about 16–18%. Ash (Fraxinus exelsior L.) stands attain high productivity on drained sites with ash content of peat about 20%.

The PDF includes a summary in English.

  • Kapustinskaité, ORCID ID:E-mail:

Register
Click this link to register for Silva Fennica submission and tracking system.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles

Committee on Publication Ethics A Trusted Community-Governed Archive