Current issue: 53(2)

Under compilation: 53(3)

Impact factor 1.683
5-year impact factor 1.950
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles containing the keyword 'koivu'.

Category: Article

article id 7178, category Article
Matti Keltikangas, Pekka Tiililä. (1968). Koivun ja kuusen istutuksen keskinäinen edullisuusjärjestys käenkaali-mustikkatyypin metsämailla. Acta Forestalia Fennica vol. 82 no. 5 article id 7178. https://doi.org/10.14214/aff.7178
English title: The economic sequence of silver birch (Betula pendula) and Norway spruce (Picea abies) when planting Oxalis-Myrtillus type forest land.

The present study proposes to calculate the economic sequence of two of Finland’s three main tree species, Norway spruce (Picea abies (L.) H. Karst.) and silver birch (Betula pendula Roth) when planted on Oxalias-Myrtillus type sites where both species are equally suitable, on biological grounds. In addition, the accuracy and applicability of the present Finnish yield tables to an economic comparison is tested. Benefit/cost ratio was selected as criterion of profitableness. All future net incomes and costs were discounted into the planting time and added together. The ratio between the discounted net revenues and the discounted investment costs (later called profit ratio) was the criterion. There is no reliable method to forecast the future wood prices, therefore two price ratios, birch veneer timber to spruce pulpwood and birch cordwood to spruce pulpwood, were chosen as free variables. The economic sequence of the tree species was determined as the function of these variables.

The main conclusions are, first, that under the present price ratios spruce appears to be the better choice for the forest owner, and the most promising policy for changing the situation seems to decrease the production costs of plants in birch nurseries. Second, the present Finnish yield tables are not consistent or accurate enough to enable any sufficiently reliable economic comparisons of tree species in artificial regeneration. The possible error of difference between two rather uncertain estimates is big. More work is needed to construct a uniform system of yield tables covering all main tree species, all site types, all macro climate conditions and all types of regeneration.

The PDF includes a summary in English.

  • Keltikangas, ORCID ID:E-mail:
  • Tiililä, ORCID ID:E-mail:
article id 7167, category Article
Veijo Heiskanen. (1966). Tutkimuksia rauduskoivikon karsimisen kannattavuudesta. Acta Forestalia Fennica vol. 81 no. 2 article id 7167. https://doi.org/10.14214/aff.7167
English title: Studies on the profitability of pruning of common birch (Betula pendula) stands.

The objective of the present investigation was to clarify the profitability of pruning silver birch (Betula verrucosa, now Betula pendula Roth) in the growing of raw material for veneer industry. Calculations were made on the grade, value, and price of pruned and untreated butt logs as well as on costs of pruning and the development of pruned trees.

The grade distribution of unpruned veneer butt logs, the grade distribution of the veneer yield, and consequently, the value of veneer yield and log prices at the plant are considerably better than those of average logs. The grade, value and price increased with increasing diameter. The value and price of pruned butt logs depended primarily on the difference between the turning pruning diameters, and their increase with decreasing pruning diameter and increasing turning diameter. The value of pruned butt logs is always considerably higher than that of unpruned logs. The increase in the value correlates to the pruning and turning diameters, and is, for example, in rotary-cut logs which have been pruned when 10 cm in diameter 80–130%.

Pruning increases the stumpage in naturally regenerated silver birch stands on Oxalis-Myrtillus site by 2,000–3,000 Fmk/ha when employed at 20 years of stand age and rotary cutting at 60–80 years of age respectively. The average pruning costs on Oxalis-Myrtillus site are 51–57 Fmk/ha.

The PDF includes a summary English.

  • Heiskanen, ORCID ID:E-mail:
article id 7167, category Article
Veijo Heiskanen. (1966). Tutkimuksia rauduskoivikon karsimisen kannattavuudesta. Acta Forestalia Fennica vol. 81 no. 2 article id 7167. https://doi.org/10.14214/aff.7167
English title: Studies on the profitability of pruning of common birch (Betula pendula) stands.

The objective of the present investigation was to clarify the profitability of pruning silver birch (Betula verrucosa, now Betula pendula Roth) in the growing of raw material for veneer industry. Calculations were made on the grade, value, and price of pruned and untreated butt logs as well as on costs of pruning and the development of pruned trees.

The grade distribution of unpruned veneer butt logs, the grade distribution of the veneer yield, and consequently, the value of veneer yield and log prices at the plant are considerably better than those of average logs. The grade, value and price increased with increasing diameter. The value and price of pruned butt logs depended primarily on the difference between the turning pruning diameters, and their increase with decreasing pruning diameter and increasing turning diameter. The value of pruned butt logs is always considerably higher than that of unpruned logs. The increase in the value correlates to the pruning and turning diameters, and is, for example, in rotary-cut logs which have been pruned when 10 cm in diameter 80–130%.

Pruning increases the stumpage in naturally regenerated silver birch stands on Oxalis-Myrtillus site by 2,000–3,000 Fmk/ha when employed at 20 years of stand age and rotary cutting at 60–80 years of age respectively. The average pruning costs on Oxalis-Myrtillus site are 51–57 Fmk/ha.

The PDF includes a summary English.

  • Heiskanen, ORCID ID:E-mail:
article id 7167, category Article
Veijo Heiskanen. (1966). Tutkimuksia rauduskoivikon karsimisen kannattavuudesta. Acta Forestalia Fennica vol. 81 no. 2 article id 7167. https://doi.org/10.14214/aff.7167
English title: Studies on the profitability of pruning of common birch (Betula pendula) stands.

The objective of the present investigation was to clarify the profitability of pruning silver birch (Betula verrucosa, now Betula pendula Roth) in the growing of raw material for veneer industry. Calculations were made on the grade, value, and price of pruned and untreated butt logs as well as on costs of pruning and the development of pruned trees.

The grade distribution of unpruned veneer butt logs, the grade distribution of the veneer yield, and consequently, the value of veneer yield and log prices at the plant are considerably better than those of average logs. The grade, value and price increased with increasing diameter. The value and price of pruned butt logs depended primarily on the difference between the turning pruning diameters, and their increase with decreasing pruning diameter and increasing turning diameter. The value of pruned butt logs is always considerably higher than that of unpruned logs. The increase in the value correlates to the pruning and turning diameters, and is, for example, in rotary-cut logs which have been pruned when 10 cm in diameter 80–130%.

Pruning increases the stumpage in naturally regenerated silver birch stands on Oxalis-Myrtillus site by 2,000–3,000 Fmk/ha when employed at 20 years of stand age and rotary cutting at 60–80 years of age respectively. The average pruning costs on Oxalis-Myrtillus site are 51–57 Fmk/ha.

The PDF includes a summary English.

  • Heiskanen, ORCID ID:E-mail:
article id 7167, category Article
Veijo Heiskanen. (1966). Tutkimuksia rauduskoivikon karsimisen kannattavuudesta. Acta Forestalia Fennica vol. 81 no. 2 article id 7167. https://doi.org/10.14214/aff.7167
English title: Studies on the profitability of pruning of common birch (Betula pendula) stands.

The objective of the present investigation was to clarify the profitability of pruning silver birch (Betula verrucosa, now Betula pendula Roth) in the growing of raw material for veneer industry. Calculations were made on the grade, value, and price of pruned and untreated butt logs as well as on costs of pruning and the development of pruned trees.

The grade distribution of unpruned veneer butt logs, the grade distribution of the veneer yield, and consequently, the value of veneer yield and log prices at the plant are considerably better than those of average logs. The grade, value and price increased with increasing diameter. The value and price of pruned butt logs depended primarily on the difference between the turning pruning diameters, and their increase with decreasing pruning diameter and increasing turning diameter. The value of pruned butt logs is always considerably higher than that of unpruned logs. The increase in the value correlates to the pruning and turning diameters, and is, for example, in rotary-cut logs which have been pruned when 10 cm in diameter 80–130%.

Pruning increases the stumpage in naturally regenerated silver birch stands on Oxalis-Myrtillus site by 2,000–3,000 Fmk/ha when employed at 20 years of stand age and rotary cutting at 60–80 years of age respectively. The average pruning costs on Oxalis-Myrtillus site are 51–57 Fmk/ha.

The PDF includes a summary English.

  • Heiskanen, ORCID ID:E-mail:
article id 7167, category Article
Veijo Heiskanen. (1966). Tutkimuksia rauduskoivikon karsimisen kannattavuudesta. Acta Forestalia Fennica vol. 81 no. 2 article id 7167. https://doi.org/10.14214/aff.7167
English title: Studies on the profitability of pruning of common birch (Betula pendula) stands.

The objective of the present investigation was to clarify the profitability of pruning silver birch (Betula verrucosa, now Betula pendula Roth) in the growing of raw material for veneer industry. Calculations were made on the grade, value, and price of pruned and untreated butt logs as well as on costs of pruning and the development of pruned trees.

The grade distribution of unpruned veneer butt logs, the grade distribution of the veneer yield, and consequently, the value of veneer yield and log prices at the plant are considerably better than those of average logs. The grade, value and price increased with increasing diameter. The value and price of pruned butt logs depended primarily on the difference between the turning pruning diameters, and their increase with decreasing pruning diameter and increasing turning diameter. The value of pruned butt logs is always considerably higher than that of unpruned logs. The increase in the value correlates to the pruning and turning diameters, and is, for example, in rotary-cut logs which have been pruned when 10 cm in diameter 80–130%.

Pruning increases the stumpage in naturally regenerated silver birch stands on Oxalis-Myrtillus site by 2,000–3,000 Fmk/ha when employed at 20 years of stand age and rotary cutting at 60–80 years of age respectively. The average pruning costs on Oxalis-Myrtillus site are 51–57 Fmk/ha.

The PDF includes a summary English.

  • Heiskanen, ORCID ID:E-mail:
article id 7165, category Article
Veijo Heiskanen. (1966). Tutkimuksia koivujen vikaisuuksista, niiden vaikutuksesta sorvaustulokseen sekä niiden huomioonottamisesta laatuluokituksessa. Acta Forestalia Fennica vol. 80 no. 3 article id 7165. https://doi.org/10.14214/aff.7165
English title: Studies on the defects of birch, their influence on the quality and quantity of rotary cut veneer, and their consideration in veneer birch grading.

The objective of this paper was to study the influence of defects of Betula pendula Roth and Betula pubescens Ehrh. on the quality, value and quantity of veneer cut produced by rotary cutting, to prepare grading rules for veneer birch and to determine the minimum quality for veneer birch, and to assess the quality and quantity of veneer yield in rotary cutting of bolts of different grades. Data for the study was collected in 1953-1963 from six plywood factories in Finland.

The effect of knot marks, knot bumps, dry and rotten knots, sound knots, sweep and crookedness, upright limbs, heart rot, open and overgrown scars and bark peeling defects in the bolt on the quality and yield of veneer is described. Recommendations for grading rules were defined on the basis of the result. The rules include three grades, for which certain defects are allowed. In the first grade are accepted bolts, which of the veneer yield included at least 30% of veneer of grades A and B when all jointing and end-clipped sheets were taken into account. In the second grade were accepted bolts, which of the main part of the veneer yield still is surface veneer on the basis of the wood quality. Of the third-grade bolts at least one third of the veneer yield ought to be surface veneer.

The PDF includes a summary in English.

  • Heiskanen, ORCID ID:E-mail:
article id 7165, category Article
Veijo Heiskanen. (1966). Tutkimuksia koivujen vikaisuuksista, niiden vaikutuksesta sorvaustulokseen sekä niiden huomioonottamisesta laatuluokituksessa. Acta Forestalia Fennica vol. 80 no. 3 article id 7165. https://doi.org/10.14214/aff.7165
English title: Studies on the defects of birch, their influence on the quality and quantity of rotary cut veneer, and their consideration in veneer birch grading.

The objective of this paper was to study the influence of defects of Betula pendula Roth and Betula pubescens Ehrh. on the quality, value and quantity of veneer cut produced by rotary cutting, to prepare grading rules for veneer birch and to determine the minimum quality for veneer birch, and to assess the quality and quantity of veneer yield in rotary cutting of bolts of different grades. Data for the study was collected in 1953-1963 from six plywood factories in Finland.

The effect of knot marks, knot bumps, dry and rotten knots, sound knots, sweep and crookedness, upright limbs, heart rot, open and overgrown scars and bark peeling defects in the bolt on the quality and yield of veneer is described. Recommendations for grading rules were defined on the basis of the result. The rules include three grades, for which certain defects are allowed. In the first grade are accepted bolts, which of the veneer yield included at least 30% of veneer of grades A and B when all jointing and end-clipped sheets were taken into account. In the second grade were accepted bolts, which of the main part of the veneer yield still is surface veneer on the basis of the wood quality. Of the third-grade bolts at least one third of the veneer yield ought to be surface veneer.

The PDF includes a summary in English.

  • Heiskanen, ORCID ID:E-mail:
article id 7163, category Article
Jaakko Meriluoto. (1965). Raaka-ainetekijöiden vaikutus sorvatun koivuviilun määrään ja laatuun. Acta Forestalia Fennica vol. 80 no. 1 article id 7163. https://doi.org/10.14214/aff.7163
English title: The influence of raw material factors on the quantity and quality of rotary cut birch veneer.

The objective of the present investigation was to clarify the influence of raw material on the quantity, and especially quality of rotary cut birch veneer by running cutting tests with constant tool setting under factory conditions and with bolts of normal size. The quality of the veneer was mainly examined in laboratory.

The result showed that with an increase in bolt size the yield increases and reaches the maximal value in the diameter range of 251–275 mm and 226–250 mm for 60-inch and 50-inch bolt, respectively. With a decrease in bolt length the yield becomes higher. With the increase in the bolt size the quality of the veneer improves.

Defects in the shape of the bolt, such as crookedness, taper and oval form, decrease the yield. The good quality of the bolts affects most the yield of full-size sheets. Increase of knottiness decreases the yield by 4–5%. Lowering of the bolt temperature below 0 °C causes a sharp decline in the yield. Moisture content of the wood did not markedly affect the yield, but it improved the quality of the veneer. The minimum moisture content was 75%.

For the technical quality of the veneer, bolt temperature was the most decisive raw material factor. Also shape defects, of which crookedness was most serious, decreased the technical quality. Increase in summerwood percentage improved the quality.

The PDF includes a summary in English.

  • Meriluoto, ORCID ID:E-mail:
article id 7163, category Article
Jaakko Meriluoto. (1965). Raaka-ainetekijöiden vaikutus sorvatun koivuviilun määrään ja laatuun. Acta Forestalia Fennica vol. 80 no. 1 article id 7163. https://doi.org/10.14214/aff.7163
English title: The influence of raw material factors on the quantity and quality of rotary cut birch veneer.

The objective of the present investigation was to clarify the influence of raw material on the quantity, and especially quality of rotary cut birch veneer by running cutting tests with constant tool setting under factory conditions and with bolts of normal size. The quality of the veneer was mainly examined in laboratory.

The result showed that with an increase in bolt size the yield increases and reaches the maximal value in the diameter range of 251–275 mm and 226–250 mm for 60-inch and 50-inch bolt, respectively. With a decrease in bolt length the yield becomes higher. With the increase in the bolt size the quality of the veneer improves.

Defects in the shape of the bolt, such as crookedness, taper and oval form, decrease the yield. The good quality of the bolts affects most the yield of full-size sheets. Increase of knottiness decreases the yield by 4–5%. Lowering of the bolt temperature below 0 °C causes a sharp decline in the yield. Moisture content of the wood did not markedly affect the yield, but it improved the quality of the veneer. The minimum moisture content was 75%.

For the technical quality of the veneer, bolt temperature was the most decisive raw material factor. Also shape defects, of which crookedness was most serious, decreased the technical quality. Increase in summerwood percentage improved the quality.

The PDF includes a summary in English.

  • Meriluoto, ORCID ID:E-mail:
article id 7119, category Article
Paavo J. Ollinmaa. (1960). Eräistä ojitetuilla soilla kasvavan puun fysikaalisista ominaisuuksista. Acta Forestalia Fennica vol. 72 no. 2 article id 7119. https://doi.org/10.14214/aff.7119
English title: Physical properties of wood growing on drained peatlands.

The objective of the investigation was to determine the differences between faultless timber grown on a peatland before and after draining, in respect of compressive strength to the grain, volume weight, and shrinkage. In addition, the influence of the boundary zone between the close-ringed wood formed before draining and the wide-ringed wood produced after draining on strength of the timber was studied. The material consisted of 15 sample trees of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) Karst.), white birch (Betula pubescens Ehrh.) and silver birch (B. Pendula Roth).

The volume weight of wood of the tree species in ascending order is; spruce, pine, white birch, silver birch. The volume weight of Scots pine seems to decrease from the butt end upwards, while no trend was revealed for spruce. In the coniferous trees, the wide-ringed wood formed subsequent to draining was slightly lighter than the close-ringed wood produced prior draining. No distinct trend was seen in the birch species. The volume weight of pine and spruce increased with decreasing width of the growth rings up to a certain limit, after which the conditions inverted.

The compressive strength of the different kinds of wood seems to increase from the butt end upwards, but after height of two meters it begins to decrease considerably. In birch, this point of inversion is in somewhat greater height. In spruce timber, the compressive strength parallel to the grain is lowest for wood which contains exclusively wide-ringed wood formed after draining. The boundary zone between the woods formed before and after draining is very distinguishable, but has no remarkable influence on the compressive strength parallel to the grain. Shrinkage of close-ringed wood is higher in all three principal directions than that of wide-ringed wood. This can be explained by the variations in volume weight and fibrillar orientation of the tracheid walls.

The PDF includes a summary in English.

  • Ollinmaa, ORCID ID:E-mail:
article id 7119, category Article
Paavo J. Ollinmaa. (1960). Eräistä ojitetuilla soilla kasvavan puun fysikaalisista ominaisuuksista. Acta Forestalia Fennica vol. 72 no. 2 article id 7119. https://doi.org/10.14214/aff.7119
English title: Physical properties of wood growing on drained peatlands.

The objective of the investigation was to determine the differences between faultless timber grown on a peatland before and after draining, in respect of compressive strength to the grain, volume weight, and shrinkage. In addition, the influence of the boundary zone between the close-ringed wood formed before draining and the wide-ringed wood produced after draining on strength of the timber was studied. The material consisted of 15 sample trees of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) Karst.), white birch (Betula pubescens Ehrh.) and silver birch (B. Pendula Roth).

The volume weight of wood of the tree species in ascending order is; spruce, pine, white birch, silver birch. The volume weight of Scots pine seems to decrease from the butt end upwards, while no trend was revealed for spruce. In the coniferous trees, the wide-ringed wood formed subsequent to draining was slightly lighter than the close-ringed wood produced prior draining. No distinct trend was seen in the birch species. The volume weight of pine and spruce increased with decreasing width of the growth rings up to a certain limit, after which the conditions inverted.

The compressive strength of the different kinds of wood seems to increase from the butt end upwards, but after height of two meters it begins to decrease considerably. In birch, this point of inversion is in somewhat greater height. In spruce timber, the compressive strength parallel to the grain is lowest for wood which contains exclusively wide-ringed wood formed after draining. The boundary zone between the woods formed before and after draining is very distinguishable, but has no remarkable influence on the compressive strength parallel to the grain. Shrinkage of close-ringed wood is higher in all three principal directions than that of wide-ringed wood. This can be explained by the variations in volume weight and fibrillar orientation of the tracheid walls.

The PDF includes a summary in English.

  • Ollinmaa, ORCID ID:E-mail:
article id 7476, category Article
Leo Heikurainen. (1958). Sekametsiköiden juuristoista ojitetulla suolla. Acta Forestalia Fennica vol. 67 no. 2 article id 7476. https://doi.org/10.14214/aff.7476
English title: Root systems of mixed forest in drained peatlands.

Draining transforms root systems of trees growing in peatlands towards the ones growing on mineral soil. However, even after efficient draining the root systems differ from the root systems of trees growing on mineral soil. This investigation concentrates on root systems of forests of similar mire types growing in similar draining conditions but having different tree species compositions. The peatland, situated in Pieksämäki in Southern Finland, was drained in 1937. Sample plots, measured in 1956, consisted of mixed forest of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies L. Karst.) and birch (Betula sp.) in different compositions, and were in natural condition.

The sedge pine bog studied in this investigation was shown to have larger total amount of roots and mycorrhiza than in previously studied dwarf shrub pine bogs. This reflects better growth conditions of the better site. The depth of root system was, however, similar. Root systems of birch were deeper than those of the coniferous tree species. Differences between Scots pine and Norway spruce were small. Corresponding differences between the species were found in the density and total number of mycorrhizas. The abundance of mycorrhizas in the roots of birch increased in deeper layers of peat, but decreased especially in spruce roots. In earlier studies the abundance of mycorrhizas decreased in the roots growing in deeper layers in pure Scots pine stands, but no such variation was seen in this study. The result suggest that the deep root system of birch may affect also the root systems of the coniferous trees. On the other hand, birch roots can have advantage over the coniferous trees.

The PDF includes a summary in German.

  • Heikurainen, ORCID ID:E-mail:
article id 7463, category Article
Paavo J. Ollinmaa. (1955). Koivun vetopuun anatomisesta rakenteesta ja ominaisuuksista. Acta Forestalia Fennica vol. 64 no. 3 article id 7463. https://doi.org/10.14214/aff.7463
English title: On the anatomical structure and properties of the tension wood in birch.

The investigation concerns with the strength of the eccentric growth accompanying formation of tension wood in silver birch  (Betula pendula Roth.) and downy birch (Betula pubescens Ehrh.), behaviour of wood in wood-working machines and its macroscopic characteristics, its microscopic and sub-microscopic structure, chemical composition, resistance against certain chemicals, physical properties, and the strength characteristics of wood.

The most detrimental properties of tension wood used in wood working industry are high longitudinal shrinkage, warping, twisting and checking. The wooliness of the cut is unwanted, for instance, in plywood and furniture. In pulp industry tension wood is better raw material than normal wood because it yields more and purer cellulose than normal wood. However, it has poorer strength properties.

The PDF includes a summary in English.

  • Ollinmaa, ORCID ID:E-mail:
article id 7463, category Article
Paavo J. Ollinmaa. (1955). Koivun vetopuun anatomisesta rakenteesta ja ominaisuuksista. Acta Forestalia Fennica vol. 64 no. 3 article id 7463. https://doi.org/10.14214/aff.7463
English title: On the anatomical structure and properties of the tension wood in birch.

The investigation concerns with the strength of the eccentric growth accompanying formation of tension wood in silver birch  (Betula pendula Roth.) and downy birch (Betula pubescens Ehrh.), behaviour of wood in wood-working machines and its macroscopic characteristics, its microscopic and sub-microscopic structure, chemical composition, resistance against certain chemicals, physical properties, and the strength characteristics of wood.

The most detrimental properties of tension wood used in wood working industry are high longitudinal shrinkage, warping, twisting and checking. The wooliness of the cut is unwanted, for instance, in plywood and furniture. In pulp industry tension wood is better raw material than normal wood because it yields more and purer cellulose than normal wood. However, it has poorer strength properties.

The PDF includes a summary in English.

  • Ollinmaa, ORCID ID:E-mail:
article id 7463, category Article
Paavo J. Ollinmaa. (1955). Koivun vetopuun anatomisesta rakenteesta ja ominaisuuksista. Acta Forestalia Fennica vol. 64 no. 3 article id 7463. https://doi.org/10.14214/aff.7463
English title: On the anatomical structure and properties of the tension wood in birch.

The investigation concerns with the strength of the eccentric growth accompanying formation of tension wood in silver birch  (Betula pendula Roth.) and downy birch (Betula pubescens Ehrh.), behaviour of wood in wood-working machines and its macroscopic characteristics, its microscopic and sub-microscopic structure, chemical composition, resistance against certain chemicals, physical properties, and the strength characteristics of wood.

The most detrimental properties of tension wood used in wood working industry are high longitudinal shrinkage, warping, twisting and checking. The wooliness of the cut is unwanted, for instance, in plywood and furniture. In pulp industry tension wood is better raw material than normal wood because it yields more and purer cellulose than normal wood. However, it has poorer strength properties.

The PDF includes a summary in English.

  • Ollinmaa, ORCID ID:E-mail:
article id 7400, category Article
P. S. Tikka. (1949). Perä-Pohjolan koivikoiden laadusta. Acta Forestalia Fennica vol. 57 no. 4 article id 7400. https://doi.org/10.14214/aff.7400
English title: Quality of birch (Betula sp.) stands in the northernmost Finland.

The quality of birch (Betula sp.) stands in Perä-Pohjola in Northern Finland is low due to the harsh environment, unsuitable sites for the species and unsatisfactory silvicultural state. A total of 236 sample trees were felled and measured in 8 sample plots. The trees were over 80 years old.

Only third of the stand volume of birch in the stands had adequate quality for merchantable timber. This is due to birch growing often in sites unsuitable for the species, the low density of the stands, the small average size of stems, and the low amount of large sized trees. These problems may contribute to the fact that birch seem to be susceptible to decay. The trees have often grown from sprouts, which leads often to poor stem form and decay. The volume and quality of both pure and mixed birch stands was sufficient only in the most fertile sites. Also, decay was more common in poor sites.

The PDF includes a summary in German.

  • Tikka, ORCID ID:E-mail:
article id 7376, category Article
O. J. Lukkala. (1942). Sateen mittauksia erilaisissa metsiköissä. Acta Forestalia Fennica vol. 50 no. 23 article id 7376. https://doi.org/10.14214/aff.7376
English title: Measurements of rainfall in different kinds of forests in Finland.

The tree canopy adsorbs part of the rainfall falling on a forest, therefore only part of it reaches the soil. This report presents results concerning interception of precipitation and groundwater level in forests of varying canopy cover. The study belongs to a larger survey on afforestation of drained treeless bogs. The rainfall was measured daily in the open fields and in the adjacent forests. The forests, mainly Norway spruce (Picea abies (L.) Karst.) dominated, were divided by the canopy cover into five classes from over dense to sparsely stocked.

The results show that in a dense, tall Norway spruce stand, light rainfall can almost entirely be adsorbed by the canopy. The heavier the rainfall, the larger proportion of it reaches the ground. Only 30% of a 5 mm rainfall reaches the ground, while 80% of a 20 mm rainfall reaches the ground. Interception of precipitation decreases gradually when the density of the forest decreases. Canopy of Scots pine (Pinus sylvestris L.) and birch (Betula sp.) stands of corresponding density adsorb less rainfall than Norway spruce canopy. Groundwater level was higher in treeless areas than in areas covered with forest. Widescale clear cuttings should, therefore, be considered carefully in forest areas that are prone to become peaty.

  • Lukkala, ORCID ID:E-mail:
article id 7359, category Article
V. T. Aaltonen. (1942). Muutamia kasvukokeita puuntaimilla. Acta Forestalia Fennica vol. 50 no. 6 article id 7359. https://doi.org/10.14214/aff.7359
English title: Growth studies on tree seedlings.

The aim of the study was to investigate effect of growth conditions on germination and growth of Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.) seedlings in greenhouse conditions. Germination of seeds becomes markedly slower as the soil temperature decreases. It seems that low temperatures affect more Norway spruce than Scots pine. When temperature rises, the fresh weight of the seedlings increases more in pine seedlings than in spruce seedlings. Accordingly, lower temperatures affect less the weight growth of spruce seedling than that of pine seedlings.

An experiment testing how root competition affect germination showed that adjacent seedlings decrease germination of seeds more than shading with branches. The effect was strongest on pine and spruce seedlings when the shading tree species was fast growing birch (Betula sp.). On the other hand, shading affected most height growth of birch seedlings. Growing space can vary in relatively large range without it affecting greatly tree growth.

The PDF includes a summary in German.

  • Aaltonen, ORCID ID:E-mail:
article id 7356, category Article
Peitsa Mikola. (1942). Koivun vesomisesta ja sen metsänhoidollisesta merkityksestä. Acta Forestalia Fennica vol. 50 no. 3 article id 7356. https://doi.org/10.14214/aff.7356
English title: Silvicultural usefulness of sprouting of birch.

Birches’ (Betula sp.) ability to grow sprouts is low. The stump grows root collar and stump shoots, but the stump shoots are not proper stump shoots that will grow from the space between wood and bark. The buds are situated very low in the base, even under the ground. In this study, no actual root shoots could be found. Also the bushy alpine birches seem to be formed from stump and root collar shoots.

In Southern Finland silver birch (Betula pendula Roth) is more common than downy birch (Betula pubescens Ehrh.) in dry upland forest sites, while downy birch is common in fresh mineral soil forests and peatlands. In Northern Finland downy birch is the dominant birch species. Of the two species downy birch has markedly better capacity to form stump and root collar shoots both in Northern and Southern Finland. In general, birches grow sprouts much more strongly in Northern Finland.

Growth of the shoots is fastest during the first year after the felling of the parent tree and slows down gradually. The stump shoots may get separated from the stump when the stump decays, and the decay may also spread to the shoots. It is common that the shoots have no own roots, and die along with the stump. The shoots may have own root system or use roots of the parent tree that have stayed alive, in the latter case decay spreads almost always from the stump to the shoot. Whether the tree was felled with axe or saw had no effect on sprouting, probably because the sprouting buds are situated in the base of the tree. The larger stumps had usually fewer sprouts than smaller stumps. The fertility of the site seemed to have little effect on sprouting, but more moist sites formed more sprouts.

Forest regeneration using sprouts may be possible in peatlands for firewood production. on mineral soil sites birch does not suit for coppicing. The proportion of trees originating from sprouts decreases strongly by the time. Consequently, in Southern Finland sprouts have little effect on regeneration of birch. In Northern Finland sprouting is the most important way of regeneration.

The PDF includes a summary in German.

  • Mikola, ORCID ID:E-mail:
article id 7356, category Article
Peitsa Mikola. (1942). Koivun vesomisesta ja sen metsänhoidollisesta merkityksestä. Acta Forestalia Fennica vol. 50 no. 3 article id 7356. https://doi.org/10.14214/aff.7356
English title: Silvicultural usefulness of sprouting of birch.

Birches’ (Betula sp.) ability to grow sprouts is low. The stump grows root collar and stump shoots, but the stump shoots are not proper stump shoots that will grow from the space between wood and bark. The buds are situated very low in the base, even under the ground. In this study, no actual root shoots could be found. Also the bushy alpine birches seem to be formed from stump and root collar shoots.

In Southern Finland silver birch (Betula pendula Roth) is more common than downy birch (Betula pubescens Ehrh.) in dry upland forest sites, while downy birch is common in fresh mineral soil forests and peatlands. In Northern Finland downy birch is the dominant birch species. Of the two species downy birch has markedly better capacity to form stump and root collar shoots both in Northern and Southern Finland. In general, birches grow sprouts much more strongly in Northern Finland.

Growth of the shoots is fastest during the first year after the felling of the parent tree and slows down gradually. The stump shoots may get separated from the stump when the stump decays, and the decay may also spread to the shoots. It is common that the shoots have no own roots, and die along with the stump. The shoots may have own root system or use roots of the parent tree that have stayed alive, in the latter case decay spreads almost always from the stump to the shoot. Whether the tree was felled with axe or saw had no effect on sprouting, probably because the sprouting buds are situated in the base of the tree. The larger stumps had usually fewer sprouts than smaller stumps. The fertility of the site seemed to have little effect on sprouting, but more moist sites formed more sprouts.

Forest regeneration using sprouts may be possible in peatlands for firewood production. on mineral soil sites birch does not suit for coppicing. The proportion of trees originating from sprouts decreases strongly by the time. Consequently, in Southern Finland sprouts have little effect on regeneration of birch. In Northern Finland sprouting is the most important way of regeneration.

The PDF includes a summary in German.

  • Mikola, ORCID ID:E-mail:
article id 7356, category Article
Peitsa Mikola. (1942). Koivun vesomisesta ja sen metsänhoidollisesta merkityksestä. Acta Forestalia Fennica vol. 50 no. 3 article id 7356. https://doi.org/10.14214/aff.7356
English title: Silvicultural usefulness of sprouting of birch.

Birches’ (Betula sp.) ability to grow sprouts is low. The stump grows root collar and stump shoots, but the stump shoots are not proper stump shoots that will grow from the space between wood and bark. The buds are situated very low in the base, even under the ground. In this study, no actual root shoots could be found. Also the bushy alpine birches seem to be formed from stump and root collar shoots.

In Southern Finland silver birch (Betula pendula Roth) is more common than downy birch (Betula pubescens Ehrh.) in dry upland forest sites, while downy birch is common in fresh mineral soil forests and peatlands. In Northern Finland downy birch is the dominant birch species. Of the two species downy birch has markedly better capacity to form stump and root collar shoots both in Northern and Southern Finland. In general, birches grow sprouts much more strongly in Northern Finland.

Growth of the shoots is fastest during the first year after the felling of the parent tree and slows down gradually. The stump shoots may get separated from the stump when the stump decays, and the decay may also spread to the shoots. It is common that the shoots have no own roots, and die along with the stump. The shoots may have own root system or use roots of the parent tree that have stayed alive, in the latter case decay spreads almost always from the stump to the shoot. Whether the tree was felled with axe or saw had no effect on sprouting, probably because the sprouting buds are situated in the base of the tree. The larger stumps had usually fewer sprouts than smaller stumps. The fertility of the site seemed to have little effect on sprouting, but more moist sites formed more sprouts.

Forest regeneration using sprouts may be possible in peatlands for firewood production. on mineral soil sites birch does not suit for coppicing. The proportion of trees originating from sprouts decreases strongly by the time. Consequently, in Southern Finland sprouts have little effect on regeneration of birch. In Northern Finland sprouting is the most important way of regeneration.

The PDF includes a summary in German.

  • Mikola, ORCID ID:E-mail:
article id 7315, category Article
Erkki Laitakari. (1934). Koivun juuristo. Acta Forestalia Fennica vol. 41 no. 2 article id 7315. https://doi.org/10.14214/aff.7315
English title: The root system of birch (Betula pubescens and B. verrucosa).
English keywords: mixed stand; forest site type

About 40% forest in Finland are mixed stands that have birch (Betula pubescens and B. verrucosa) as one of the species. The aim of this research was to study the structure of root system of birch and compare it to the other main tree species in Finland.

The root systems were dug out and measured in 28 sample plots in Southern and Central Finland, representing different forest site types. Birch roots correspond 30‒100% of the volume of the stem, the largest root systems being in the sandy soils or peatlands. Also the longest lateral roots can be found at these sites. The size variation of root system of birch is larger than in Scots pine (Pinus sylvestris L.), and the vertical root system is in general smaller in birch. Birch seems to be better than pine able to adapt its root system to the existing conditions. The smallest root systems were found in the good forest site types, but the roots grow in the good sites denser than in the poor sites. The lateral roots of the main tree species in Finland, birch, Scots pine and Norway spruce (Picea abies (L.) H. Karst.) grow in different depths, which decreases the competition between the species. This finding gives support to cultivation of mixed stands.

The PDF includes a summary in English.

  • Laitakari, ORCID ID:E-mail:
article id 7291, category Article
Paul Wallden. (1934). Tutkimuksia koivupuun anatoomisen rakenteen ja teknillisten ominaisuuksien keskinäisestä riippuvuudesta solumittauksien perusteella. Acta Forestalia Fennica vol. 40 no. 14 article id 7291. https://doi.org/10.14214/aff.7291
English title: Studies on relationship between anatomical structure and technical properties of birch wood.

Birch wood is used widely in wooden structures where mechanical strength is needed. The aim of the research was to study the influence of the relative share of mechanically weak tracheids, and length of the wood fibers on specific gravity and bending strength of downy birch (Betula pubescens Ehrh.) wood. According to the results, the strength of wood is strongly dependent on the relative share of tracheids, and length of the libriform cells. The strength of the wood increases when the share of tracheids decreases and the length of libriform cells increases. The specific gravity can be used as an indication of the strength of wood, especially if it is possible to analyze the structure of the wood.

The PDF includes a summary in German.

  • Wallden, ORCID ID:E-mail:
article id 7290, category Article
K. J. Valle. (1934). Fennoskandian koivuvyöhykkeen eläinmaantieteellisestä merkityksestä. Acta Forestalia Fennica vol. 40 no. 13 article id 7290. https://doi.org/10.14214/aff.7290
English title: The zoogeographical significance of the birch zone in Fennoscandia.

The subarctic-subalpine mountain birch forest zone discerns Fennoscandia from other northern regions. The zone offers protection against wind to animal life, protects soil from evaporation and increases humidity. The article reviews distribution of vertebrate and butterfly species in the birch forest zone. There are no vertebrates that occur solely in the birch forest zone, and only few live mostly in the zone. Many species live either both on the birch forest zone and the treeless fell area above it, or in the birch forest zone and coniferous zone below it. Similarly, no butterflies occur only in the birch forest zone, but the zone is the main habitat for some species. Consequently, the subarctic-subalpine birch forest zone cannot be considered to be an independent ecozone but a transitional zone between regio silvatica and regio arctica that is nearer to the northern coniferous zone than the fell region

The PDF includes a summary in German.

  • Valle, ORCID ID:E-mail:
article id 7290, category Article
K. J. Valle. (1934). Fennoskandian koivuvyöhykkeen eläinmaantieteellisestä merkityksestä. Acta Forestalia Fennica vol. 40 no. 13 article id 7290. https://doi.org/10.14214/aff.7290
English title: The zoogeographical significance of the birch zone in Fennoscandia.

The subarctic-subalpine mountain birch forest zone discerns Fennoscandia from other northern regions. The zone offers protection against wind to animal life, protects soil from evaporation and increases humidity. The article reviews distribution of vertebrate and butterfly species in the birch forest zone. There are no vertebrates that occur solely in the birch forest zone, and only few live mostly in the zone. Many species live either both on the birch forest zone and the treeless fell area above it, or in the birch forest zone and coniferous zone below it. Similarly, no butterflies occur only in the birch forest zone, but the zone is the main habitat for some species. Consequently, the subarctic-subalpine birch forest zone cannot be considered to be an independent ecozone but a transitional zone between regio silvatica and regio arctica that is nearer to the northern coniferous zone than the fell region

The PDF includes a summary in German.

  • Valle, ORCID ID:E-mail:
article id 7287, category Article
Erkki K. Cajander. (1934). Havaintoja eräällä myrskytuhoalueella. Acta Forestalia Fennica vol. 40 no. 10 article id 7287. https://doi.org/10.14214/aff.7287
English title: Observations in a storm damage area.

A big storm hit Finland in 12.10.1933, and caused forest damages especially in the coasts of the Gulf of Finland and Baltic Sea, and in the eastern part of the country. In these areas the wind felled about 75,000‒85,000 m3 timber trees in the state lands. The extent of the wind damage was measured in forest area of 1,500 hectares in Lapinjärvi in Southern Finland. The wind had felled 42% of the Scots pine (Pinus sylvestris L.), 70% of the Norway spruce (Picea abies (L.) H. Karst.) and 44% of the Betula sp. trees. Thus, Norway spruce had been most susceptible for wind damage. That extensive damages in Norway spruce seed tree stands risk the regeneration in the area. Natural regeneration of Norway spruce using seed trees may, therefore, be questioned. The seed tree areas on hills, and especially hollows next to the hills were susceptible for wind damage. A denser border stand protects sparsely stocked seed tree area. The damages were also smaller in older seed tree areas, where the trees and ground vegetation had had time to recover after the felling. The felled spruce and birch trees had often stem rot.

The PDF includes a summary in German.

  • Cajander, ORCID ID:E-mail:
article id 7276, category Article
Paul Walldén. (1933). Eräs puun laadun tunnus. Acta Forestalia Fennica vol. 39 no. 5 article id 7276. https://doi.org/10.14214/aff.7276
English title: Bending strength of birch wood.

According to earlier studies, the weight of the wood may be a useful quality when aim is to create such wooden structures where small weight is combined with maximum mechanical strength. Of the northern tree species, Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst.) and birch (Betula sp.), birch has the highest bending strength. The main focus of this study was to find out if there is correlation between the specific gravity of cell wall substance and bending strength of the birch wood, and if the specific gravity of cell wall substance could be used as indication of the quality of the wood.

Dominant trees from 55 years old birch (Betula sp.) stand was selected for bending tests. The bending strength did not vary in birch as much as in many other tree species. The highest bending strength was achieved near the specific gravity class s=0,65, and it can be concluded that when the specific gravity falls below S=0,57, the wood’s technical quality is not sufficient. The article includes a literature review on the subject.

The PDF includes a summary in German
  • Walldén, ORCID ID:E-mail:
article id 7207, category Article
N. A. Hildén. (1926). Koivun kuutioimisesta massataulukoiden avulla Pohjois-Karjalasta kootun aineiston nojalla. Acta Forestalia Fennica vol. 32 no. 2 article id 7207. https://doi.org/10.14214/aff.7207
English title: Preparation of volume table of birch, based on data collected in North Karelia.

Sample trees of Betula sp. were felled in North Karelia in different forest site types. The stands, both mixed and pure stands, had been regenerated in areas where shifting cultivation had been practiced. Sample trees represented breast height diameters up to 43 cm. Diameter was measured in distances of 1/10 of the height of the tree to calculate the stem form. The form factor was higher for the good forest site types than the poor sites. The volume tables were calculated based on the assumption that diameter does not affect the form factor. Comparing the volume table to the original data, it was found that the table seems to form a successful fitting of the data. Control data proved that the method seems to give a good fitting to the used data. Thus, the volume table can be used to measure volume of birch stands in North Karelia.

The PDF includes a summary in German.

  • Hildén, ORCID ID:E-mail:
article id 5411, category Article
Eero Paavilainen. (1990). Effect of refertilization of pine and birch stands on a drained fertile mire. Silva Fennica vol. 24 no. 1 article id 5411. https://doi.org/10.14214/sf.a15563

Refertilization with PK, about 15 years after the first fertilizer application, increased tree growth and the amount of nutrients in tree litter in Scots pine (Pinus sylvestris L.) and birch (mainly Betula pubescens Erhr.) stands on a drained fertile mire in Northern Finland (65°34 N’, 25°42’ E). The increase in growth and nutrient contents after refertilization was greatest in the mature pine stand where the application of nitrogen and micronutrients gave an additional response compared to the PK-application.

The PDF includes an abstract in Finnish.

  • Paavilainen, ORCID ID:E-mail:
article id 5411, category Article
Eero Paavilainen. (1990). Effect of refertilization of pine and birch stands on a drained fertile mire. Silva Fennica vol. 24 no. 1 article id 5411. https://doi.org/10.14214/sf.a15563

Refertilization with PK, about 15 years after the first fertilizer application, increased tree growth and the amount of nutrients in tree litter in Scots pine (Pinus sylvestris L.) and birch (mainly Betula pubescens Erhr.) stands on a drained fertile mire in Northern Finland (65°34 N’, 25°42’ E). The increase in growth and nutrient contents after refertilization was greatest in the mature pine stand where the application of nitrogen and micronutrients gave an additional response compared to the PK-application.

The PDF includes an abstract in Finnish.

  • Paavilainen, ORCID ID:E-mail:
article id 5266, category Article
Matti Kärkkäinen. (1986). Malli männyn, kuusen ja koivun puuaineen oksaisuudesta. Silva Fennica vol. 20 no. 2 article id 5266. https://doi.org/10.14214/sf.a15445
English title: Model of knottiness of wood material in pine, spruce and birch.

A computer model was developed for predicting knottiness of wood material of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst.) and birch (Betula sp). The prediction included location of knots, their size and quality, i.e. if they are dead or living knots. The model suits best for tree species where branches are born at the base of shoots, in Finland such tree species is Scots pine.

The usefulness of the model was tested in the prediction of knots in wooden elements of joinery industry. According to the results, the shape of cross section affects the surface quality of elements. Especially useful is a quadratic cross section as it increases the probability to get a knotless surface.

The PDF includes an abstract in English.

  • Kärkkäinen, ORCID ID:E-mail:
article id 5266, category Article
Matti Kärkkäinen. (1986). Malli männyn, kuusen ja koivun puuaineen oksaisuudesta. Silva Fennica vol. 20 no. 2 article id 5266. https://doi.org/10.14214/sf.a15445
English title: Model of knottiness of wood material in pine, spruce and birch.

A computer model was developed for predicting knottiness of wood material of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst.) and birch (Betula sp). The prediction included location of knots, their size and quality, i.e. if they are dead or living knots. The model suits best for tree species where branches are born at the base of shoots, in Finland such tree species is Scots pine.

The usefulness of the model was tested in the prediction of knots in wooden elements of joinery industry. According to the results, the shape of cross section affects the surface quality of elements. Especially useful is a quadratic cross section as it increases the probability to get a knotless surface.

The PDF includes an abstract in English.

  • Kärkkäinen, ORCID ID:E-mail:
article id 5261, category Article
Matti Kärkkäinen. (1986). Koivuvaneritukkien ja -runkojen arvosuhteet. Silva Fennica vol. 20 no. 1 article id 5261. https://doi.org/10.14214/sf.a15440
English title: Value relations of birch veneer logs and stems in Finland.

A model was developed in order to describe the peeling of veneer for determining value relationship for birch veneer logs and stems. The model was based on selling prices of veneer and other products as well as processing costs. The model was utilized for determining the effect of various input variables on the log value.

According to the results, the effect of tree size was important for the value of raw material. Even knottiness had an effect although only in the higher manufacturing costs of knotty veneer were taken into account. Pruning was a method to increase substantially the proportion of knotless veneer.

The PDF includes an abstract in English.

  • Kärkkäinen, ORCID ID:E-mail:
article id 5261, category Article
Matti Kärkkäinen. (1986). Koivuvaneritukkien ja -runkojen arvosuhteet. Silva Fennica vol. 20 no. 1 article id 5261. https://doi.org/10.14214/sf.a15440
English title: Value relations of birch veneer logs and stems in Finland.

A model was developed in order to describe the peeling of veneer for determining value relationship for birch veneer logs and stems. The model was based on selling prices of veneer and other products as well as processing costs. The model was utilized for determining the effect of various input variables on the log value.

According to the results, the effect of tree size was important for the value of raw material. Even knottiness had an effect although only in the higher manufacturing costs of knotty veneer were taken into account. Pruning was a method to increase substantially the proportion of knotless veneer.

The PDF includes an abstract in English.

  • Kärkkäinen, ORCID ID:E-mail:
article id 5255, category Article
Matti Kärkkäinen, Jukka Pietilä, Raili Vihola. (1985). Suomalaisten puulajien iskutaivutuslujuus tuoreena. Silva Fennica vol. 19 no. 4 article id 5255. https://doi.org/10.14214/sf.a15434
English title: Impact bending strength of Finnish tree species in green condition.

There are great impact forces in mechanized harvesting and wood yard in the mills which can cause breaks in timber. The impact strength of timber in green condition was tested in temperatures of +18°C and -18°C using sawn pieces (20 x 20 x 300 mm) of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst.), birch (Betula pendula Roth and B. pubescens Ehrh.), grey alder (Alnus incana L.) and aspen (Populus tremula L.). In addition, unbarked naturally round sticks (length 300 mm, diameter 15 and 35 mm) of the same species were tested.

The impact strength of round sticks was 1.5–4.4 times as great as that of sawn pieces. The reasons are possibly the avoidance of cell breaks at the surface as well as growth stresses. The frozen samples were clearly weaker than the unfrozen ones. As a rule, the impact bending strength increased with increased density of the species. However, the correlation varied greatly between species. If density was kept constant, an increase in the growth ring width decreased the impact strength. The reason may lie in the fracture mechanism.

The PDF includes a summary in English.

  • Kärkkäinen, ORCID ID:E-mail:
  • Pietilä, ORCID ID:E-mail:
  • Vihola, ORCID ID:E-mail:
article id 5255, category Article
Matti Kärkkäinen, Jukka Pietilä, Raili Vihola. (1985). Suomalaisten puulajien iskutaivutuslujuus tuoreena. Silva Fennica vol. 19 no. 4 article id 5255. https://doi.org/10.14214/sf.a15434
English title: Impact bending strength of Finnish tree species in green condition.

There are great impact forces in mechanized harvesting and wood yard in the mills which can cause breaks in timber. The impact strength of timber in green condition was tested in temperatures of +18°C and -18°C using sawn pieces (20 x 20 x 300 mm) of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst.), birch (Betula pendula Roth and B. pubescens Ehrh.), grey alder (Alnus incana L.) and aspen (Populus tremula L.). In addition, unbarked naturally round sticks (length 300 mm, diameter 15 and 35 mm) of the same species were tested.

The impact strength of round sticks was 1.5–4.4 times as great as that of sawn pieces. The reasons are possibly the avoidance of cell breaks at the surface as well as growth stresses. The frozen samples were clearly weaker than the unfrozen ones. As a rule, the impact bending strength increased with increased density of the species. However, the correlation varied greatly between species. If density was kept constant, an increase in the growth ring width decreased the impact strength. The reason may lie in the fracture mechanism.

The PDF includes a summary in English.

  • Kärkkäinen, ORCID ID:E-mail:
  • Pietilä, ORCID ID:E-mail:
  • Vihola, ORCID ID:E-mail:
article id 5249, category Article
Jari Parviainen. (1985). Istuttamalla perustetun nuoren männikön, kuusikon, siperianlehtikuusikon ja rauduskoivikon kasvu. Silva Fennica vol. 19 no. 4 article id 5249. https://doi.org/10.14214/sf.a15428
English title: Growth of young Scots pine, Norway spruce, siberian larch and silver birch plantations.

Early growth of four different tree species (Pinus sylvestris L., Picea abies (L.) H. Karst., Larix sibirica Ledeb and Betula pendula Roth) 16–23 years after planting were compared in a field experiment of 16 square plots established on a stony, grove-like upland (Oxalis-Myrtillus forest type) in Southern Finland. This study gives additional results to the publication Folia Forestalia 386/1979.

At this early stage, the growth of the spruce stand was clearly slower than that of the other species for all parameters to be measured (height, diameter, and volume growth). Height growth was most rapid in the silver birch stand and diameter growth in the larch stand. No clear differences were found in the mean volume of the 100 thickest trees in the stand between the larch and silver birch.

The PDF includes a summary in English.

  • Parviainen, ORCID ID:E-mail:
article id 5236, category Article
Pirkko Romakkaniemi-Niemelä. (1985). Rauduskoivun runkosolukon RC-arvo talveentumisasteen osoittajana. Silva Fennica vol. 19 no. 2 article id 5236. https://doi.org/10.14214/sf.a15415
English title: RC-value of stem tissue of silver birch as an indicator of cold acclimation.

The aim of this study was to examine the development of the cold acclimation of silver birch (Betula pendula Roth) seedlings. The effect of fertilization was also studied. The seedlings were two-year-old. As a comparison stump sprouts from the near-by forest were used. The seedlings were treated in temperatures of +5°C (= control), –5°C and –15°C four times with conductivity measurements and with ocular inspection.

There were no significant differences in cold acclimation between different fertilization treatments or between the fertilized seedlings and stump sprouts. This may have been due to the rapid cooling rate. The cold acclimation of the seedlings was registered well by the changes in the relative conductivity values. The differences between the relative conductivity values of different temperature treatments in August and the beginning of September were significant. However, in the end of September and especially October the values no longer differed significantly. Correlation proved good between the relative electrical conductivity tests and the ocular inspections of the damages.

The PDF includes a summary in English.

  • Romakkaniemi-Niemelä, ORCID ID:E-mail:
article id 5233, category Article
Leo Heikurainen. (1985). Verhopuuston vaikutus kuusitaimikon kehitykseen. Silva Fennica vol. 19 no. 1 article id 5233. https://doi.org/10.14214/sf.a15412
English title: The influence of birch nurse crop (Betula pubescens) on the growth of Norway spruce (Picea abies) seedling stands on drained peatlands.

Young Norway spruce (Picea abies (L.) H. Karst.) are susceptible to early summer frost damage. Birch (Betula pubescens Ehrh.) naturally colonize rich or fairly rich drained peatlands after clear cutting, and can provide protection for developing seedlings. The report describes the development of spruce stands after various types of handing of the birch nurse crops.

Different proportions of birch and spruces did not have any influence on the spruce stand production. In cases where the nurse crop stand is removed when the spruce stand age was 20 years and height 4 m the spruce suffered badly but recovered with time, reaching the spruce stand growing under a nurse stand within the next 20 years. The height growth of spruce depends on the density of the nurse stand, especially on fertile sites. The development of diameter growth also depends on the density of the nurse trees. Removal of the nurse stand in spruce stands on the sites concerned should be done when the spruce stand is 20 years old and at the height of 4 m.

The PDF includes a summary in English.

  • Heikurainen, ORCID ID:E-mail:
article id 5221, category Article
Aleksandr P. Jevdokimov. (1984). Visakoivun kasvatus Neuvostoliiton luoteisosissa. Silva Fennica vol. 18 no. 3 article id 5221. https://doi.org/10.14214/sf.a15400
English title: Experiences of curly birch growing in north-western Russia.

Curly birch (Betula pendula var. carelica (Merklin) Hejtmanek) is widely distributed over north-western part or Russia, including the Baltic Soviet Republics and Belorussia. Experiences of growing this decorative species in Soviet Karelia and Leningrad region are presented. Commonly used classifications of the species are described, and recommendations for management of curly birch cultures and production of planting stock in greenhouses are given.

The PDF includes a summary in English.

  • Jevdokimov, ORCID ID:E-mail:
article id 5206, category Article
Matti Kärkkäinen. (1984). Miten koivuun tulisi suhtautua metsätaloudessa? Silva Fennica vol. 18 no. 1 article id 5206. https://doi.org/10.14214/sf.a15385
English title: The proper attitude towards birch in forestry.

A literature survey based on Nordic literature deals with the biology, use, harvesting and economy of birch (Betula sp.). According to the results, the easily quantified hard facts are against cultivation of birch: lower growth, poorer production of valuable assortments, lower price of pulp, higher planting costs, and higher harvesting and transport costs than for conifers. The soft facts, which may be true, are not easily measured or their importance evaluated: the possible improvement of soil, decreasing risk of insect and fungi attacks, shelter against frost etc. Due to the differences in the nature of the facts the discussion of cultivation of birch will probably continue.

The PDF includes a summary in English.

  • Kärkkäinen, ORCID ID:E-mail:
article id 5188, category Article
Eljas Pohtila, Tapani Pohjola. (1983). Vuosina 1970-1972 Lappiin perustetun aurattujen alueiden viljelykokeen tulokset. Silva Fennica vol. 17 no. 3 article id 5188. https://doi.org/10.14214/sf.a15171
English title: Results from the reforestation experiment on ploughed sites established in Finnish Lapland during 1970–1972.

The objective of the study was to compare different reforestation methods on ploughed areas in Finnish Lapland. Four species were compared: Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst.), silver birch (Betula pendula Roth) and Siberian larch (Larix sibirica Ledeb.). The experiments were established in different parts of Lapland on different types of sites in 1970–72.

In Scots pine there was a difference of 15 percentage points in survival of seedlings between the best and worst methods of regeneration. Containerized seedlings and paper pot seedlings had the best survival rates. In Norway spruce the respective difference between sowing and planting was about 20 percentage points. In favour of planting. The survival rate can be increased by about 20 percentage points by selecting the right tree species. The average height varied from 25 cm (the sowed Norway spruce) to 179 cm (the planted silver birch) after 10 growing seasons. The birch was planted at the most fertile sites only. The longer time passed from the afforestation the clearer was the effect of the local growing conditions on the development of the seedlings. The elevation of the site was one factor seemed to influence the success of the seedlings.

The PDF includes a summary in English.

  • Pohtila, ORCID ID:E-mail:
  • Pohjola, ORCID ID:E-mail:
article id 7044, category Article
O. J. Lukkala. (1920). Lehdeksien tekotapa Lounais-Suomessa ja sen metsähoidollinen merkitys. Acta Forestalia Fennica vol. 16 no. 2 article id 7044. https://doi.org/10.14214/aff.7044
English title: The silvicultural influences of collecting leaf fodder in South-West Finland.

In South-West Finland the usual method to make leaf fodder for cattle has been to cut the branches and collect the new sprouts again next year. According to this review, the most common tree species to be topped is Betula sp. Downy Birch (Betula pubescens Ehrh.) grows shoots easier than silver birch (B. pendula Roth). The topped forests are usually small and situated near the settlements, next to the fields and meadows. The birch trees are typically cut when they are 15-20 years old. Regularly topped birch rots easily and seldom exceeds 50 years. The capacity to grow shoots depends on the age of the tree, site and time of the cutting. The risk for rotting can be decreased by removing only part of the shoots and cutting the shoots a short distance from the base of the shoot. Collecting leaf fodder decreased in Finland, and was common only in the South-West Finland and Åland.

The PDF includes a summary in German.

  • Lukkala, ORCID ID:E-mail:
article id 7042, category Article
Yrjö Ilvessalo. (1920). Kasvu- ja tuottotaulut Suomen eteläpuoliskon mänty-, kuusi- ja koivumetsille. Acta Forestalia Fennica vol. 15 no. 4 article id 7042. https://doi.org/10.14214/aff.7042
English title: Growth and yield tables for the Scots pine, Norway spruce and birch in the southern part of Finland.

The first proper growth and yield tables were prepared in Finland already in 1872, but they have been used little as the needs of forestry and forest sciences increased. One of the problems of the old yield tables was how the site quality classes are determined. The new growth and yield tables use the forest site type classification, which enables the use of same site types for all tree species. This makes it possible to compare the growth of different tree species in same kind of sites. The tables also use stem frequency distribution series. In the first stage, the tables were prepared for Southern and Central Finland.

The PDF includes a summary in German.

  • Ilvessalo, ORCID ID:E-mail:
article id 5086, category Article
Jussi Meriluoto. (1980). MCPA- ja 2,4,5-T-herbisidien käyttökelpoisuus taimiston hoidossa. Silva Fennica vol. 14 no. 4 article id 5086. https://doi.org/10.14214/sf.a15027
English title: Applicability of MCPA- and 2,4,5-T-herbicides in sapling stand management.

The applicability of MCPA- and 2,4,5-T-herbicides for use in the management of sapling stands and the possibilities of carrying out foliar spraying at an earlier date than at precent with smaller doses of the active ingredient were examined in this study. The results were obtained from foliage spraying experiments carried out in Central Finland in summer 1976. MCPA and 2,4,5-T were as effective as each other against deciduous tree species. However, MCPA was slightly more effective against aspen (Populus tremula L.) than 2,4,5-T. The spraying date had no effect on the mortality rate of aspen or birch (Betula pendula Roth and B. pubescens Ehrh.) There were only very slight differences between the results for different dosage levels. The damage caused to Scots pine (Pinus sylvestris L.) was very slight. The temperature conditions prevailing during spraying affected spraying effectiveness in such way that the mortality rate decreased during cold period.

The PDF includes a summary in English.

  • Meriluoto, ORCID ID:E-mail:
article id 5083, category Article
Matti Kärkkäinen. (1980). Havaintoja koivutukkien epäpyöreydestä ja pituusmittaeroista. Silva Fennica vol. 14 no. 3 article id 5083. https://doi.org/10.14214/sf.a15024
English title: Observations on the out-of-roundness and deviations from nominal lengths of birch logs.
English keywords: Betula; birch; logs; roundness; diameter

A material of 478 birch logs were measured. The horizontal diameter was on average larger than the vertical one, the difference increasing with the increasing diameter. The reason was supposed to be the effect of sweep and out-of-roundness of logs. The difference between the actual and nominal length increased with the increasing lengths, but decreased with increasing diameter.

The PDF includes a summary in English.

  • Kärkkäinen, ORCID ID:E-mail:
article id 5083, category Article
Matti Kärkkäinen. (1980). Havaintoja koivutukkien epäpyöreydestä ja pituusmittaeroista. Silva Fennica vol. 14 no. 3 article id 5083. https://doi.org/10.14214/sf.a15024
English title: Observations on the out-of-roundness and deviations from nominal lengths of birch logs.
English keywords: Betula; birch; logs; roundness; diameter

A material of 478 birch logs were measured. The horizontal diameter was on average larger than the vertical one, the difference increasing with the increasing diameter. The reason was supposed to be the effect of sweep and out-of-roundness of logs. The difference between the actual and nominal length increased with the increasing lengths, but decreased with increasing diameter.

The PDF includes a summary in English.

  • Kärkkäinen, ORCID ID:E-mail:
article id 5034, category Article
Matti Kärkkäinen. (1979). Pinotilavuusmääräinen kuorintahäviö koneellisesti ladotuissa pinoissa. Silva Fennica vol. 13 no. 2 article id 5034. https://doi.org/10.14214/sf.a14891
English title: Barking loss of mechanically loaded piles.

In this study the loose volume of 58 piles of pulpwood were measured before and after barking by rotary ring barker. The volume was 2,121 m3. A recommendation is made, based on the results of the study, concerning the barking loss from piled wood: for green Scots pine (Pinus sylvestris L.) pulpwood, 8.8% of the stacked volume; for seasoned pine pulpwood, 6.1% of the stacked volume; and 8.0% for birch (Betula sp.) pulpwood, green and seasoned. The amount of bark left on bolts was small for pine bolts, namely 0.33%, but quite large for birch bolts, 2.84% of the green weight.

The PDF includes a summary in English.

  • Kärkkäinen, ORCID ID:E-mail:
article id 5011, category Article
Kullervo Etholén. (1978). Kokemuksia visakoivun kasvatuksesta Lapissa. Silva Fennica vol. 12 no. 4 article id 5011. https://doi.org/10.14214/sf.a14865
English title: Experimental growing of curly birch in Finnish Lapland.
Original keywords: visakoivu; Lappi; puunkasvatus

The aim of the present study was to register the curly birch (Betula pendula f. carelica Sok.) plantations established in Lapland and to determine their location and present condition. The information was obtained by means of interviews and visual observations.

In Lapland, the growing of curly birch started in 1950’s and the early 1960’s. During this period, in the different supervisory areas of Lapland, the National Board of Forestry established curly birch stands totalling approximately 30 ha, including about 34,000 seedlings. The bulk of the plantations have been destroyed by animals. On the other hand, the curly birch experimental stands established by the Finnish Forest Research Institute have thrived. The private sector of Forest Management has been engaged in the production of seedlings on a large scale and, as a result of this, curly birch trees are frequently seen as ornamentals in Rovaniemi and in other localities in Lapland. When taken care of, curly birch thrives in Lapland and produces I-class curly wood.

The PDF includes a summary in English.

  • Etholén, ORCID ID:E-mail:
article id 5010, category Article
Jyrki Raulo, Reino Saarnio, Timo Ylitalo. (1978). Visakoivun karsittujen oksien kyljestyminen ja värivian leviäminen niistä runkoon. Silva Fennica vol. 12 no. 4 article id 5010. https://doi.org/10.14214/sf.a14864
English title: Sealing-off of pruned branch stumps in curly birch and subsequent spread of discoloration into the stemwood.

The material used in this study was collected in 1975 from a 41-years old curly birch (Betula pendula f. carelica Sok.) stand in Southern Finland, which had been pruned 12 years earlier. While the stand was thinned, 26 felled trees were selected for further study to study occurrence of discoloration originating from of pruned branches.

The study material included 35 pruned branch stumps and 38 naturally pruned branch stumps of curly birch. The mean diameter of the former was 31 mm and of the latter, only 15 mm. Of the pruned branch stumps, 23% had become completely sealed-off within 12 years. The discoloration had spread into the stem as little from pruned branch stumps as from naturally pruned ones even though the former were greater in diameter. Advanced rot was not found in any of the samples studied.

The PDF includes a summary in English.

  • Raulo, ORCID ID:E-mail:
  • Saarnio, ORCID ID:E-mail:
  • Ylitalo, ORCID ID:E-mail:
article id 5009, category Article
Risto-Veikko Pätiälä, Kari Blomberg, Juhani Paakkanen, Sulo Piepponen. (1978). Havaintoja raudus- ja visakoivun mahlan sokeripitoisuudesta. Silva Fennica vol. 12 no. 4 article id 5009. https://doi.org/10.14214/sf.a14863
English title: Carbohydrates in the sap of silver birch and its curly grained form.
Original keywords: rauduskoivu; visakoivu; sokerit; mahla

Carbohydrates of the sap of six curly and four silver birches (Betula pendula f. carelica Sok. and B. pendula Roth) were analysed by gas chromatography as trimethylsilyl derivates both from hydrolysed and unhydrolyzed samples. Sorbitol was identified from silver birch sap only. In each of the two groups there were glucose and fructose. No other carbohydrates were discovered. The hydrolysis had no influence on the results.

The PDF includes a summary in English.

  • Pätiälä, ORCID ID:E-mail:
  • Blomberg, ORCID ID:E-mail:
  • Paakkanen, ORCID ID:E-mail:
  • Piepponen, ORCID ID:E-mail:
article id 5009, category Article
Risto-Veikko Pätiälä, Kari Blomberg, Juhani Paakkanen, Sulo Piepponen. (1978). Havaintoja raudus- ja visakoivun mahlan sokeripitoisuudesta. Silva Fennica vol. 12 no. 4 article id 5009. https://doi.org/10.14214/sf.a14863
English title: Carbohydrates in the sap of silver birch and its curly grained form.
Original keywords: rauduskoivu; visakoivu; sokerit; mahla

Carbohydrates of the sap of six curly and four silver birches (Betula pendula f. carelica Sok. and B. pendula Roth) were analysed by gas chromatography as trimethylsilyl derivates both from hydrolysed and unhydrolyzed samples. Sorbitol was identified from silver birch sap only. In each of the two groups there were glucose and fructose. No other carbohydrates were discovered. The hydrolysis had no influence on the results.

The PDF includes a summary in English.

  • Pätiälä, ORCID ID:E-mail:
  • Blomberg, ORCID ID:E-mail:
  • Paakkanen, ORCID ID:E-mail:
  • Piepponen, ORCID ID:E-mail:
article id 5008, category Article
Jyrki Raulo, Gustaf Sirén. (1978). Neljän visakoivikon päätehakkuun tuotos ja tuotto. Silva Fennica vol. 12 no. 4 article id 5008. https://doi.org/10.14214/sf.a14862
English title: Yield in volume and money of final cutting in four curly birch stands.
Original keywords: visakoivu; tuotos; laatu

Curly birch (Betula pendula f. carelica Sok.) is characterized by large variations in stem form and the internal structure of the wood, and is generally divided in to four types on the basis of visible external stem characteristics. First plantation experiments in Finland in the 1920’s in experimental areas of the Finnish Forest Institute, had become ripe for cutting and were felled. The study material of this study consists of one 52-year old and three 42–43 -year old stands of curly birch.

The yield suitable for plywood manufacture from the oldest stand was 34,777 kg/ha and that of curly grained branch wood 39,452 kg/ha. The corresponding figures of the other stands were, on average 24,219 and 57,271 kg/ha. The yield from the stands were sold at the present-day price. The result was economically better than from any other forest tree species grown in Finland. The younger stands were obviously cut too early. It was concluded that the genetic quality of the seedlings used in the plantations in the 1920’s and 1930’s was not very high.

The PDF includes a summary in English.

  • Raulo, ORCID ID:E-mail:
  • Sirén, ORCID ID:E-mail:
article id 5007, category Article
Olavi Huuri. (1978). Visaseura. Silva Fennica vol. 12 no. 4 article id 5007. https://doi.org/10.14214/sf.a14861
English title: Curly Birch Society.
Original keywords: Visaseura; visakoivu; järjestöt

Curly birch, a curly grained variety of birch (Betula pendula f. carelica Sok.), has fetched a higher price than any other Finnish tree species on account of its rarity and decorativeness. Curly graininess has been found in Finland in addition to silver birch, also in Alnus glutinosa and Sorbus aucuparia.

The Curly Birch Society was founded in Finland in 1956. Its purpose is to promote the cultivation and use of curly birch, and to coordinate the activities of curly birch cultivators, forest industry and research. The society has made excursions and held informative meetings every year. Furthermore, the society has arranged exhibitions and participated in more extensive agricultural and forestry fairs.

The PDF includes a summary in English.

  • Huuri, ORCID ID:E-mail:
article id 4970, category Article
Markku Mäkelä. (1977). Metsähakkeen tiheyden laskeminen. Silva Fennica vol. 11 no. 2 article id 4970. https://doi.org/10.14214/sf.a14821
English title: Calculating the basic density of whole tree- and logging residue chips.

A method is presented in this study for calculating the basic density of whole tree- and logging residue chips and the results of trial measurements on some commonly used chip sorts. The basic density of Scots pine whole tree chips was found to be 1–18 kg/m3 smaller than that of pine pulpwood of the same age. The basic density of Norway spruce whole tree chips was 4–22 kg/m3 greater than that of similar aged pulpwood. The basic density of birch whole tree chips was 4–16 kg/m3 and grey alder whole tree chips 7–24 kg/m3 greater than pulpwood of the same age. The basic density of conifer logging residue chips was considerably greater than that of pine and spruce whole tree ships.

The PDF includes a summary in English.

  • Mäkelä, ORCID ID:E-mail:
article id 4962, category Article
Matti Keltikangas, Kustaa Seppälä. (1977). Ojitusalueiden hieskoivikoiden kasvatus taloudellisena vaihtoehtona. Silva Fennica vol. 11 no. 1 article id 4962. https://doi.org/10.14214/sf.a14813
English title: The economics of growing downy birch stands on drained peatlands in Finland.

The aim of this study was to determine under what conditions and with what premises the growing of Betula pubescens Ehrh. is an economically competitive alternative to the growing of Scots pine (Pinus sylvestris L.) in drained peatlands. The basic material consisted of all drainage projects in Ostrobothnia in Western Finland in 1937–38 and 1957–59, according to the archives of the Central Board of Forestry Tapio, including such areas that were at least moderately fertile and had birch dominated young stands or no tree cover. A total of 202 sample plots were measured.

According to the results, the discounted timber yield of the thinned B. pubescens stands is about 10% greater than that of untreated stands. The removing of birch seedlings and the subsequent growing of fully stocked Scots pine is more profitable than growing B. pubescens stands only if the establishment and subsequent development of the pine stand involve no costs. If the site in question is a fertile open drained peatland, establishment of a pine stand is obviously a better financial proposition than a naturally regenerated birch stand. However, if there is already a fully stocked young birch stand on the site, it is more economical to let it grow using a shortish rotation time.

The PDF includes a summary in English.

  • Keltikangas, ORCID ID:E-mail:
  • Seppälä, ORCID ID:E-mail:
article id 4948, category Article
Matti Kärkkäinen. (1976). Puun ja kuoren tiheys ja kosteus sekä kuoren osuus koivun, kuusen ja männyn oksissa. Silva Fennica vol. 10 no. 3 article id 4948. https://doi.org/10.14214/sf.a14794
English title: Density and moisture content of wood and bark, and bark percentage in the branches of birch, Norway spruce and Scots pine.

In the study the proportion of branch samples of various diameter were studied. The branches were taken from small trees to be harvested by total tree chipping method. The material consisted of 1,056 branch samples of birch (Betula verrucosa, now B. pendula Roth, and Betula pubescens Erhr.), Norway spruce (Picea abies (L.) H. Karst.) and Scots pine (Pinus sylvestris L.) at intervals of 20 cm along each branch.

With exception of the basic density of bark, there was a relation between all the other properties which were studied and the diameter. Even when the effect of diameter was eliminated, in many cases the effect of the distance of the samples from the stem became apparent.

The PDF includes a summary in English.

  • Kärkkäinen, ORCID ID:E-mail:
article id 4924, category Article
Teklé Kapustinskaité. (1975). Puuston kasvu ja turpeen tuhkapitoisuus ojitetuilla soilla. Silva Fennica vol. 9 no. 3 article id 4924. https://doi.org/10.14214/sf.a14766
English title: Ash content of peatland soils and stand growth in connection with drainage.

The ash content has been found to correlate with the fertility of peatlands. Relationship between height of 80-year-old stands and ash content of peat in topmost 30 cm layer was examined in Lithuanian conditions. On drained peatlands with ash content of peat from 3% to 8% pine stands increase in height. Ash content of peat being about 7% Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) H. Karst.) stands on drained sites are found to be of equal height. Ash content of peat more than 8–9% has no significant effect on growth of pine or spruce stands. Birch (Betula verrucosa (B. Pendula Roth.) and Betula pubescens Erhrh.), stands are less sensitive to ash content of peat compared with other species. Black alder (Alnus glutinosa L. Gaertn.) stands occurred in sites with ash content of peat more than 8–10%. The height of the stands become equal both in drained and undrained sites in the cases where ash content of peat is about 16–18%. Ash (Fraxinus exelsior L.) stands attain high productivity on drained sites with ash content of peat about 20%.

The PDF includes a summary in English.

  • Kapustinskaité, ORCID ID:E-mail:
article id 4924, category Article
Teklé Kapustinskaité. (1975). Puuston kasvu ja turpeen tuhkapitoisuus ojitetuilla soilla. Silva Fennica vol. 9 no. 3 article id 4924. https://doi.org/10.14214/sf.a14766
English title: Ash content of peatland soils and stand growth in connection with drainage.

The ash content has been found to correlate with the fertility of peatlands. Relationship between height of 80-year-old stands and ash content of peat in topmost 30 cm layer was examined in Lithuanian conditions. On drained peatlands with ash content of peat from 3% to 8% pine stands increase in height. Ash content of peat being about 7% Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) H. Karst.) stands on drained sites are found to be of equal height. Ash content of peat more than 8–9% has no significant effect on growth of pine or spruce stands. Birch (Betula verrucosa (B. Pendula Roth.) and Betula pubescens Erhrh.), stands are less sensitive to ash content of peat compared with other species. Black alder (Alnus glutinosa L. Gaertn.) stands occurred in sites with ash content of peat more than 8–10%. The height of the stands become equal both in drained and undrained sites in the cases where ash content of peat is about 16–18%. Ash (Fraxinus exelsior L.) stands attain high productivity on drained sites with ash content of peat about 20%.

The PDF includes a summary in English.

  • Kapustinskaité, ORCID ID:E-mail:
article id 4922, category Article
Matti Kärkkäinen. (1975). Koivu- ja haapatukkien poikkipinta-alan mittaaminen. Silva Fennica vol. 9 no. 3 article id 4922. https://doi.org/10.14214/sf.a14764
English title: Measurement of the cross-sectional area of birch and aspen logs.

The aim of the study was to determine the extent to which the cross section of birch (Betula sp.) and aspen (Populus tremula L.) logs differ from a circle and to test some simple methods for measuring the cross-sectional area which can be used, for instance, for determining the volume of the logs. The material consisted of 420 debarked birch disks and 240 aspen disks which were representative of the logs arriving at two factories.

The convex deficit values for the material were very small, the cross-sectional area error being in general less than 1%. On the other hand, the other parameters deviated from the circular form to quite a large degree. It was also evident that the radii measured from the piths to the surface of the wood varied considerably more in the same disk, as regards length, than the diameters measured in different directions.

It was evident that the shape of the average cross-sectional area was not in general elliptical. It thus appears that any method for measuring the cross-sectional area which is based on elliptical formula is not suitable. The method which gave the best result was that in which the cross-sectional area was taken as the average of the area of the circle calculated from the smallest diameter and that calculated from the diameter passing at right angles to it. This method also appeared to be the best for disks which deviated to quite a large degree from the circular form. The suitability of this method is increased by the fact that the relative error is only slightly dependent on the size of the disk.

The PDF includes a summary in English.

  • Kärkkäinen, ORCID ID:E-mail:
article id 4876, category Article
Tapio Lehtiniemi, Juhani Sarasto. (1973). Kokemuksia rauduksen istutuksesta ojitetuille soille. Silva Fennica vol. 7 no. 1 article id 4876. https://doi.org/10.14214/sf.a14706
English title: Betula verrucosa plantations on peat.

The aim of the present study was to assess whether two-year old Betula verrucosa Ehrh. (now Betula pendula Roth.) transplants can be used in afforestation of drained peatlands and what factors affect the development of the young trees. The seedlings were planted in 1967. The site was repair planted next spring due to mortality caused by a undefined fungal disease, and the plantations were fertilized with NPK fertilizer (soil application. The seedlings were measured twice a year until the autumn 1970.

Only 28% of the original transplants, and 73.4% of the repair plantations were alive in 1970. In some cases, fertilization improved the results, while in others it was detrimental to the trees or had no effect on survival. According to peat analysis, the poor survival and development of the plants could be due to the too high ratios of N/Ca and N/P. Stunted or dead trees displayed often necrosis caused by Godronia multispora. According to the experiences, Betula verrucosa plantations are inferior to those obtained with Scots pine (Pinus sylvestris L.). In addition, the results indicate that in old draining areas calcium and phosphorus are often too low in comparison to nitrogen.

The PDF includes a summary in English.

  • Lehtiniemi, ORCID ID:E-mail:
  • Sarasto, ORCID ID:E-mail:
article id 4784, category Article
Matti Leikola, Pentti Pylkkö. (1969). Verhopuuston tiheyden vaikutus metsikön minimilämpötiloihin hallaöinä. Silva Fennica vol. 3 no. 1 article id 4784. https://doi.org/10.14214/sf.a14570
English title: Influence of stand density on the minimum temperatures during frost nights.

The objective of this investigation was to study the influence of stand density of white birch (Betula pubescens Ehrl.) on the minimum temperatures in the stand during the growing season, and the actual minimum temperatures of the leading shoot of Norway spruce (Picea abies (L.) H. Karst.) seedlings growing in the open. The 40-year-old uniform white birch stand was situated in 142 m above the sea level in Southern Finland. The stand was treated with thinnings of three different densities in 1961.

Air temperature was recorded in four sample plots at heights of 0.1 m, 0.5 m, 1.0 m, 2 m and 4 m. In the stand of moderate density, temperatures were measured at heights of 6.0 m, and in the stand of full density at 6.0 m, 8.0 m and 10.0 m.

The temperature differences between stands of various densities proved to be rather small. Especially the thinnest stand differed very little from the open area. The soil surface has in all cases been warm compared with the higher air layers indicating meadow-fog-type by Geier (1965). On cloudy or windy weather all the temperature profiles in the various stands resembled each other. The difference between the air temperature and temperature of the spruce shoot was greatest at midnight and decreased steadily thereafter.

The problem in using shelter stands for spruce regeneration areas is that optimum shelter stand density is difficult to define. Already a thin shelter stand causes drawbacks to the young seedlings, but in order to be effective enough against early frosts, the shelter stand should be comparatively dense.

The PDF includes a summary in English.

  • Leikola, ORCID ID:E-mail:
  • Pylkkö, ORCID ID:E-mail:
article id 4701, category Article
Veijo Heiskanen. (1960). Tutkimuksia koivuhalkojen painosta ja kosteudesta. Silva Fennica no. 108 article id 4701. https://doi.org/10.14214/sf.a9136
English title: Studies on the weight and moisture of split birch fuel wood.

The purpose of this investigation is to examine the weight and moisture of split birch fuel wood and to calculate its heat values. The weight was measured of 255 truck loads in six different locations during the winter 1959–1960. Moisture analysis was made of sample specimens collected from the loads.

The dry matter weight of the birch fuel wood was in an average 333 kg/m3 piled measure. The lowest measured weight was 319 and the highest 341 kg/m3 piled measure. The moisture content in the different parts of the pile varies distinctly. Driest wood is found in the middle of the pile. Wood in the top and bottom of the pile have about similar moisture content.

The manner of storage influences the drying process. The moisture content of open piles is 20.5%, of paper-covered piles 19.9% and roofed multiple-piles of split fuel wood 19.3%. The 2-year-old piles were dryer than 1-year-old ones. Higher percentages (25% and 20 %, respectively) than those measured in the study, are recommended for practical use. The heat value of the wood stored in a pile was in average 1,435 Mcal/m3 piled measure, and 1,455 Mcal/m3 piled measure sampled from a truck load.

The PDF includes a summary in English.

  • Heiskanen, ORCID ID:E-mail:
article id 4732, category Article
Juhani Päivänen. (1966). Sateen jakaantuminen erilaisissa metsiköissä. Silva Fennica no. 119 article id 4732. https://doi.org/10.14214/sf.a14290
English title: Distribution of rainfall in different types of forest stands.

Stand precipitation and stemflow studies became necessary in connection with hydrologic studies, for instance, to explain the deviations resulting from rains in the ratios between the water content of peat and the groundwater level, throughfall during rains of variable heaviness, and effect of stand treatment on soil moisture level. In this project the distribution of rainfall in stands differing in species composition and density was studied in Central Finland in 1963–1965 in fifteen stand precipitation sample plots. In addition, rain gauges were situated under individual Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst.) and birch (Betula sp.) trees.

The average precipitation in the open was 4.8 mm, the corresponding precipitation in the stand was 77% for birch, 71% for pine and 62% for spruce. Measurements of stemflow from individual sample trees showed that less than ¼ mm (about 1.5%) during a 15 mm rain in a pine stand. In the spruce stands stemflow is negligible. A part of the sample plots was in drained peatlands with a dense vegetation of small shrubs. The shrub layer retention was about 10% even during heavy rain. In a small forest clearing, the bordering effect of the forest was seen up to the distance of 5 metres from the edge of the forest. During the period of study, on an average 3% more precipitation was recorded in the clearing than in the open, the difference being probably due to the stronger wind effect in the open.

The PDF includes a summary in English.

  • Päivänen, ORCID ID:E-mail:
article id 4730, category Article
Erkki Lähde. (1966). Kokeita selluloosan hajaantumisnopeudesta erilaisissa metsiköissä. Silva Fennica no. 119 article id 4730. https://doi.org/10.14214/sf.a14288
English title: Experiments on the decomposition rate of cellulose in different stands.

The aim of this project was to investigate the cellulose decomposition rate in the soil on the ecological conditions created by different tree species, particularly birch (Betula sp.) and Norway spruce (Picea abies (L.) H. Karst.). Therefore, comparable sample plots were established in adjoining birch and spruce stands. Data on the stands, the vegetation, and the soil in the sample plots were collected. The experiment was carried out in the Ruotsinkylä Experimental Forest near Helsinki in Southern Finland.

Five pieces (3x5x0.15 cm) of cellulose (bleached sulphite pulp) were dried, weighed, and fastened in a row into a nylon bag. The bags were placed into the soil at a slant so that the upmost piece of cellulose was in the depth of 0–1.5 cm and the bottom one 6–7.5 cm. The weight losses of the pieces were measured after periods ranging from 6 to 12 months.

The results show that even within the same forest type, decomposition is much more rapid in birch stands than in spruce stands. In all the stands the decomposition rate decreased rapidly with increasing depth. The difference between birch and spruce stand, as well as the decrease with increasing depth, was probably mainly due to different thermal conditions.

The PDF includes a summary in English.

  • Lähde, ORCID ID:E-mail:
article id 4652, category Article
Kullervo Kuusela. (1956). Hakkuilla käsiteltyjen koivikoiden rakenteesta ja kasvusta. Silva Fennica no. 90 article id 4652. https://doi.org/10.14214/sf.a9115
English title: On the structure and growth of birch stands treated with cutting.

The study is continuation of the earlier structure and growth studies of Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) H. Karst.) in Forest Research Institute. The material represents birch stands (Betula verrucosa, now B. pendula, and B. Pubescens L.) in Southern Finland. The stands were treated with different fellings, and in regard to their silvicultural condition classified as good, satisfactory and unsatisfactory. Height of the trees, height of living crown, volume, increment and volume increment and development of stem diameter series was measured.

The most characteristic difference between the silviculturally good and poor stands was that the the annual increment of the good stands concentrated into large size trees, and the increment of unsatisfactory stands into small and inferior trees.

It is concluded that if the aim of stand treatment is to produce large and high quality volume increment, the most favourable stand volume of  birch stands, compared with naturally normal stand volume, seems to be 90-85% at the age of 41-55 years, and 80-70% at the age of 56-65 years. If growth of large size trees is aimed at, the maximum number of the dominant trees per hectares cannot be more than 400 at the age of 50-60 years.

The article includes a summary in English.

  • Kuusela, ORCID ID:E-mail:
article id 4647, category Article
Pekka Sainio. (1955). Hirven talvisesta ravinnosta. Silva Fennica no. 88 article id 4647. https://doi.org/10.14214/sf.a9109
English title: Winter nutrition of elk.

Increase in the elk (Alces alces L.) population and the problems of its grazing has called for detailed research. The present study concentrated on three observation areas representing northern, western and eastern parts of Finland. There were 28 field observers watching 68 elks.

Earlier investigations in Finland indicate that aspen (Populus tremula L.) is the staple diet of elk. This study reached different conclusions, probably largely because of aspen is gradually becoming an increasingly rare tree species in Finland. According to this study, the principal food of elk in the winter is willow (Salix sp.). In the whole country, willow accounts for about 70% of elk’s nutrition. In the Far North the percentage is approx. 90. Of the other tree species, the order of preference is: aspen, Scots pine, mountain ash, juniper and birch. In addition, in Western Finland where snow is less deep, lingonberry and blueberry shrubs are on the menu. Beard moss on the spruce was frequently eaten locally. Elk seems to have eaten mainly the last annual shoot of trees and bushes. In few cases it has gnawed the bark of Scots pine, aspen and willow. Elk consumes in average 340 twigs or terminal shoots per day in the winter. This corresponds to about 1.8 kg of food.

The problem of elks damaging Scots pine seedlings has been observed in Western Finland, were the elk population is higher. The article suggests that suitable feeding places would be left for elk in places that are unsuitable for agriculture or forestry. Leaving, for instance, birch seedlings in Scots pine stands has been noticed to attract elks and to increase the damage to pine.

The article includes an abstract in English and a summary in Swedish.

  • Sainio, ORCID ID:E-mail:
article id 4579, category Article
Reino Kalliola. (1942). Pyhätunturin kansallispuiston kasvillisuudesta ja kasvistosta. Silva Fennica no. 59 article id 4579. https://doi.org/10.14214/sf.a9083
English title: Vegetation and flora in the Pyhätunturi National Park.

The article is based on the writer’s visits in the area in 1933 and 1939. Pyhätunturi national park was established in 1938. The fell of Pyhätunturi rises up to 540 meters above the sea level, and 357 meters above the surrounding area. The soil is predominantly stony, and the rock is quartzite. The climate is continental with low rainfall. This results in a barren area, where array of plant species is limited with the exception of few gorges with fertile river valleys. The forests have remained mostly in natural state.

Vegetation is arranged in three zones: forested area, subalpine fell birch area and alpine bare top of the fell. Scots pine (Pinus sylvestris L.) forms timberline more often than Norway spruce (Picea abies (L.) H. Karst.). Coniferous forests rise up to 365 meters on the northern slopes and up to about 385 on the southern slopes of the fell. It is followed by fell birch zone (Betula tortuosa, now Betula pubescens subsp. Czerepanovii) up to about 450-475 meters on the eastern and northern slopes, and 475-490 meters on the western slopes. The most common forest site type is Empetrum-Myrtillus site type. Herb-rich spruce swamps along the rivers have highest diversity of species. The article describes the plant species found in forests, peatlands, fell birch zone and top of the fell in detail. In all 162 different vascular plant species and 16 non-indigenous species were found in the area.

The article includes an abstract in German.

  • Kalliola, ORCID ID:E-mail:
article id 4569, category Article
Martti Tertti. (1939). Näkökohtia kuusimetsän hoidosta. Silva Fennica no. 52 article id 4569. https://doi.org/10.14214/sf.a13976
English title: Forest management of Norway spruce forests.

Silva Fennica issue 52 includes presentations held in professional development courses, arranged for foresters working in public administration in 1938. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

This presentation describes different types of fellings in Norway spruce (Picea abies (L.) H. Karst.) forests in different forest site types. The use of thinning from below and above, clear cutting of Norway spruce stands, and thinning of mixed forests with birch (Betula sp.) are discussed.

  • Tertti, ORCID ID:E-mail:

Register
Click this link to register for Silva Fennica submission and tracking system.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles

Committee on Publication Ethics A Trusted Community-Governed Archive