Current issue: 53(3)

Under compilation: 53(4)

Impact factor 1.683
5-year impact factor 1.950
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles containing the keyword 'korjuukustannukset'.

Category: Article

article id 4991, category Article
Pertti Harstela, Leo Tervo. (1978). Taimikkopuun korjuumenetelmien vertailua. Silva Fennica vol. 12 no. 2 article id 4991. https://doi.org/10.14214/sf.a14845
English title: Comparison of methods for harvesting in sapling stand.

A theoretical nomogram was made for estimating the costs of fully mechanized thinning and the driving speed of the machine. Based on this nomogram and the previous studies three harvesting methods were compared; systematic fully mechanized harvesting, selective fully mechanized harvesting, and manual felling combined with whole-tree chipping.

The third method was cheaper than the fully mechanized methods in a pole-stage stand. The choice of the most advantageous chipping station depended on conditions, but the smaller tree size and possibly the reduced damage on the remaining stand favour chipping on the strip road rather than chipping on the intermediate landing or at the mill.

Mechanized systematic thinning was the cheapest method for harvesting in the sapling stand. The required driving speed were so low that ergonomic factors should not hinder its use. Factors related to the future production of the stand do, however, limit its use. Mechanized selective thinning does not seem to be an economic method for harvesting in a sapling or pole-stage stand.

The PDF includes a summary in English.

  • Harstela, ORCID ID:E-mail:
  • Tervo, ORCID ID:E-mail:
article id 4830, category Article
Matti Kärkkäinen. (1970). Optimaalisesta vinssausmatkasta. Silva Fennica vol. 4 no. 4 article id 4830. https://doi.org/10.14214/sf.a14619
English title: The optimum winching distance.

The goal of this study was to develop a mathematical model for determination of the optimal winching distance in different conditions as based on harvesting costs. In the thinned forest the strip roads are parallel and the winching routes perpendicularly to them. A directed felling of trees is used so that it is easy to make loads to be winched. The stems can also be prepared to timber assortments on the stump area and gathered to loads for skidding alongside the winching routes.

After winching the timber is transported using a forwarder mowing on the strip roads. If the stems have not been bucked in the forests, they are to be prepared to timber assortments before the following transportation, because the problem of turning whole stems in a thinned forest has not yet been solved.

In the mathematical model the formation of the costs was described using 18 variables of which 15 had an effect on the optimum winching distance. Some empirical values were estimated concerning these variables, and the corresponding optimum winching distance were computed. The optimum was mainly determined by the quantity of timber harvested per unit area, the size of the winching load, the regression coefficient of the times which were depended on the winching distance.

According to the model, the deviation from optimum winching distance does not cause a very great change in the analysed total costs. When the winching distance is longer, the increase of the costs is smaller than if it is shorter than optimum. In general, the increase of the costs was so small that in practice one obviously can be satisfied with rather approximate methods in determining the suitable winching distance.

The PDF includes a summary in English.

  • Kärkkäinen, ORCID ID:E-mail:

Register
Click this link to register for Silva Fennica submission and tracking system.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles

Committee on Publication Ethics A Trusted Community-Governed Archive