Janine Schweier , Gero Becker

Harvesting of short rotation coppice – harvesting trials with a cut and storage system in Germany

Schweier J., Becker G. (2012). Harvesting of short rotation coppice – harvesting trials with a cut and storage system in Germany. Silva Fennica vol. 46 no. 2 article id 61. https://doi.org/10.14214/sf.61

Abstract

Short rotation coppice (SRC) harvesting techniques are available in Germany, but broad experience and knowledge about machine performance and the related effective costs of harvesting operations are still missing. This information is crucial, as harvesting costs strongly influence the economic performance of the overall supply chain. Therefore, it was the aim of this study to collect and analyze productivity data of different harvesting systems for SRC. The combined cut and chip system on the one hand and the cut and storage system on the other hand were studied by literature review. Several studies analyze the combined cut and chip systems and the reported machine productivities showed great variations. The average was 30 green tons per scheduled machine hour (gt smh^–1). Few studies are analysing the cut and storage system. They report that machines still are under development and that further research is needed. Therefore, time studies of harvesting operations using the cut and storage system were carried out. Five trials were performed with the harvesting machine “Stemster MK III” developed by Nordic Biomass. The share of productive working time was 85% and the average productivity was 21 gt smh^–1. These results were compared with values from the literature. Resulting harvesting costs were calculated per oven dry ton (euros odt^–1). The advantages and disadvantages of both harvesting systems are highlighted.

Keywords
productivity; harvest operations; marginal sites; SRC; Stemster MK III

Received 20 September 2011 Accepted 6 March 2012 Published 31 December 2012

Views 2753

Available at https://doi.org/10.14214/sf.61 | Download PDF