Articles containing the keyword 'supply'

The first aim of this study was to develop a simulation model describing the flow of different timber qualities to different firms. The second aim was to study preliminary the factors which affect timber distributions. In addition, we tested the hypothesis that in a small sawmill firm the traditional way of organizing timber procurement does not direct effectively good quality logs to the special production. The game theoretic approaching and the principles of Monte-Carlo simulation were applied in development of the simulation model. The most important factors of the model were tried to find for further studies with sensitive analysis. Empirical validation brought forth promising results in the area of one municipality. The buyer’s awareness of a marked stand, the seller’s willingness to sell a marked stand, the buyer’s ability to pay for wood and the proportion of first quality pine logs in a marked stand affected the distribution of pine logs. The results also supported the hypothesis that the traditional system, in which sawmills or their own forest departments procure themselves all timber needed, is not the most effective way to direct enough good quality timber to the special production.

• Tolvanen-Sikanen, E-mail: tt@mm.unknown
• Harstela, E-mail: ph@mm.unknown
• Sikanen, E-mail: ls@mm.unknown

In 1979, the Federal Research in the United States instituted a so-called ”tight money” policy which led to a decrease in the demand for stumpage. The decrease in demand brought about lower stumpage prices and, consequently, a waning interest in policies to stimulate NIPF production. The authors report on five recent studies on NIPF behaviour and raise concerns that increases in demand for housing may bring new pressure upon NIPF as a source of wood.

• Steiguer, E-mail: js@mm.unknown
• Royer, E-mail: jr@mm.unknown

In Japan many governmental projects have been promoted during 35 years since 1950, which were most active in the history of our forestry and wood industry. They were pushed forward for and by high economic growth. This article refers to the development of our forest policy and projects in those days. But as for the future of the forest economics, it is an urgent question to develop the comparative study between every nation’s experience. In order to contribute to this problem, the forest policy is divided into three fields and experiences are discussed.

• Handa, E-mail: rh@mm.unknown

Standard methods of welfare economics are used in a market simulating framework to evaluate policy measures designed to increase future timber supplies. Forest management cost-share programs are examined using this methodology. The differential regional impact of cost-share payments is considered, as is the distribution of these benefits between stumpage producers (owners of forest land) and stumpage consumers (producers of forest products). Previous estimates of the welfare gains that would result from a higher level of forest management cost-share payments in the southern United States are revised to account for the loss of public revenue resulting from lower future prices. A methodology for comparing alternative policy instruments is discussed, and a preliminary, qualitative comparison is made between the use of cost-share payments and alternative policy measures.

• Brooks, E-mail: db@mm.unknown

An empirical analysis of the Finnish non-industrial private forest owners indicates that forestry extension has an effect on the supply of timber and the use of cutting potentials. This effect appears to be indirect rather than direct. The use of extension services is likely to increase the frequency of timber sales, which in turn, increases the use of the allowable cut via increased volume of actual cuttings. Forestry extension can also be considered as an intermediate variable through which certain background conditions and owner characteristics affect the use of cutting potential.

• Järveläinen, E-mail: vj@mm.unknown

A methodology to evaluate forestry programs aimed at increasing timber supply from nonindustrial private forests is presented that aggregates the marginal social cost and marginal social benefit of a sample program participants and compares them in a benefit-cost efficiency ratio. The paper exposes a methodology followed to evaluate several forestry programs in Massachusetts, USA, and discusses its advantages and inconveniences compared to the other methodologies that have been used for the same purpose. The marginal analysis is based on detailed property and landowner behaviour surveys which are costly but represent a good standard to compare the performance of other approaches. 

The PDF includes a summary in Finnish.

• Harou, E-mail: ph@mm.unknown

Certain trends in the sales behaviour of private non-industrial forest owners suggest that the forest industries have to rely on a raw material supply much less than the allowable cut. This paper deals with several factors responsible for the change in sales behaviour during the last 20–25 years. These changes are caused by social change, a multi-face process which is led by industrialization. It is manifested in the increasing division of labour, more pronounced strive for efficiency, change in social values for the benefit of the adoption of innovations and thus of further changes.

It has become more common than previously to borrow money instead of selling timber. An incentive for doing so is provided by the increased progression of income tax scales which makes it more profitable than earlier to substitute a loan for timber sales with a view to reduce the amount of taxes. In 1977, the real value of the farmers’ debts was 1.7 times as large as in 1970. Inflation provides a further incentive to borrow money rather than to sell timber, because it tends to reduce debts, whereas a growing stock keeps increasing without affecting the property taxation, maintaining its real unit value.

Certain forestry policy measures conductive to increasing the forest owner’s willingness to sell timber are suggested. Among the most promising seems to be an adjustment of the present area-based yield taxation so as to take into account the age class distribution of the growing stock.

The PDF includes a summary in Finnish.

• Riihinen, E-mail: pr@mm.unknown

Crown and stem growth of young Scots pines (Pinus sylvestris L.) were studied in relation to photosynthate supply and light condition in a stand. The magnitude of needle and bud formation, and radial and height growth were to a great extent dependent on the photosynthate supply. However, in shaded conditions the growth of each characteristics was greater than expected on the basis of photosynthate supply. In the stem system this was especially apparent for height growth. Consequently, height growth was favoured at the expense of radial growth in shaded conditions. It also appeared that the basic density of wood was negatively related to both tree position and photosynthate supply.

The PDF includes a summary in Finnish.

• Kellomäki, E-mail: sk@mm.unknown
• Kanninen, E-mail: mk@mm.unknown

This study was carried out on behalf of the Central Association of Finnish Forest Industries (now Finnish Forest Industries Federation) in order to obtain information about the wood raw material situation, to serve, in turn, as a basis for the forest industries’ long-term planning. The study deals with the potential supply of roundwood, industrial residue and forest residue by the year 200 by five wood-supply areas. Examination of the situation during the period of 1972–80 is based on available balances and that concerning the period 1985–2000 in the estimated quantities available for industrial use.

The PDF includes a summary in English.

• Suomen Metsäteollisuuden Keskusliitto, E-mail: –

The task of this study was to gather all available information concerning timber-sales behaviour of private forest owners and to try to find the probable trends in this behaviour. The initiative for the study came from the Central Association of Finnish Forest Industries.

In Finland there are areas of timber savings and those of overcutting. These are mainly explained by regional variation in prosperity of forest owners. There are also several individual factors affecting timber sales behaviour. Without major changes in forest policy the annual variation in quantity cut in Finland is increasing and the degree of cutting seem to remain below the allowable cut.

The PDF includes a summary in English.

• Hahtola, E-mail: kh@mm.unknown
• Järveläinen, E-mail: vj@mm.unknown
• Reunala, E-mail: ar@mm.unknown

The Finnish forest industries have doubled their use of wood raw material during the past two decades. The average annual overcut of 4.0 million m³ in 1960–64 has been turned into an average annual surplus of 2.7 million m³ in 1965–69. By 1974 industry’s requirements for domestic roundwood would increase by about 6.3 million m³, if all new capacity can be taken into full production. The MERA allowable cut, if realized, would leave a 1.5 million m³ annual surplus in the forest balance in 1974. Less intensive forestry programs would mean a 1.5 to 4.4 million m³ overcut in 1974.

The PDF includes a summary in English.

• Linnamies, E-mail: ol@mm.unknown

This study estimates the supply of soil water required for the annual and total production of energy material by the biomass of 32-year-old plantation of red pine, Pinus resinosa Ait. in Wisconsin, the United States.

The supply of transpiration water was determined as the sum of summer precipitation, winter stored water, and condensed vapor, minus gravitational discharge and evaporation of intercepted rainfall. On the average, the 1,20 m root zone of coarse sandy soils of central Wisconsin receives 2,750 M.T. of water per hectare. During the 32nd year of plantation growth, the increment biomass, including 43% of merchantable timber, was 10,100 kg/ha, or 162 x 105 kcal/g. At this time of the culminating growth, the production of 1 kg of wood material consumed 272 kg of water. The corresponding transpiration coefficient 0,37% is near the maximum for the ecosystem of hard pines – sandy soils of glacial outwash with field capacity between 7 and 9%. On the weight basis, the annual leaf fall constituted 32% of the biomass and over 80% of merchantable timber.

The entire supply of water of 96,000 M.T./ha produces in 32 years 211,112 kg of total dry matter at a rate of 1 kg of wood per 455 kg of water, with corresponding transpiration coefficient of 0,22%. The evapogravitational losses during the early stages of the stand’s growth decreased the water utilization efficiency of trees about 40%.

The information obtained permitted to outline several hydrological relationships pertinent to forest culture, namely: maximum rate of forest growth as delineated by the supply of available transpiration water; content of available moisture in soils of high tension capacity; contribution to soil water rendered by natural subirrigation and condensation of athmospehric vapor; growth depressing effect of weeds.

The PDF includes a summary in Finnish.

• Wilde, E-mail: sw@mm.unknown

The present investigation is concerned with the price elasticity of sawn wood, concentrating on the price elasticity of sawn wood supply for export. The supply of sawn wood for export is referred to the joint attitude to price changes of all producers participating in the market.

The study concludes that producers cannot in the short- and medium-term view use the price parameter to increase total utilization in the sawn wood market. Demand holds a primary position in price formation. The capacity reserve of the sawmills permits great variations in output at the mill level, and thus elasticity in the supply of sawn wood. High timber costs are typical for the industry. Supply of roundwood can easily be adapted even to large variations in demand. The price elasticity of roundwood supply is rather great.

The long process of sawn wood production and the resulting relatively long lead-time of deliveries result in a long adaptation time of supply. Expansion and contraction of sawn wood exports cause, via the effect of exports, on income similar fluctuations in the domestic sales of sawn wood. This weakens the price elasticity of exports in some degree.

The ‘instantaneous elasticity’ upwards of sawn wood supply might be great, but speculation with stocks at the different levels of production often makes it ‘incalculable’. The price elasticity of a medium-long and long period can be expected to be relatively great upwards. The downward elasticity of a period of medium length is probably small. The elasticity of a prolonged period may be influenced by the substitution of other materials for sawn wood.

The PDF includes a summary in Finnish.

• Holopainen, E-mail: vh@mm.unknown

In the present investigation, the problems connected to demand of firewood are dealt with by studying the fuel markets of the three biggest towns in Finland – Helsinki, Turku and Tampere as well as those of Vaasa. The purpose of the investigation was to study the firewood supply areas in two time periods, in 1933-1939 and in 1945-1947, after the Second World War.

Railway and shipping were the most important ways for transporting firewood in 1933-1939. Towards the end of the period, road transport increased especially in Turku and in Vaasa. In 1945-47 almost 90% of the firewood transported to Helsinki, 60% to Tampere and Turku, and over 50% of the firewood transpors to Vaasa were carried by rail. One factor supporting rail transport was that the tariff policy of the State Railways gave preference to firewood transports.

The supply areas increased markedly from 1933-1939 to 1945-1947. Supply of firewood near the towns in the southern, southwestern and western parts of the country was small. Also, pulp industry began to use small-sized timber in 1930s, which increased competition of the wood. Coal and coke began to replace firewood in the 30s, but their use decreased during and after the war due to supply shortage.

The PDF includes a summary in English.

• Holopainen, E-mail: vh@mm.unknown

The effects and relative efficiency of alternative forest taxes are analysed theoretically. The Fisherian two-period model of consumption, savings and timber harvesting is extended by incorporating the management intensity decision and deriving the concept of long-run timber supply. The effects of lump-sum (site productivity), realized income (yield) and ad valorem property taxes on short-run timber supply, management intensity, and long-run timber supply are established. As the core of the study, the alternative taxes are compared in order to determine the appropriate forest tax regime in terms of production efficiency. The efficiency criterion generally requires that the excess burden of taxation at any given tax revenue should be kept to a minimum. The study distinguishes between an initially undistorted economy and an economy with pre-existing distortions due to capital income taxation (interest charge deductions). When the effects on forest management decisions of forest and capital income taxes are considered as a whole, a neutral forest taxation is no longer efficient. The non-timber benefits of a forest are incorporated to examine the robustness of the tax results with respect to the objective function. Finally, forest tax issues specific to Finland are considered, and administrational and equity aspects are discussed.

The PDF includes a summary in Finnish.

• Ovaskainen, E-mail: vo@mm.unknown

The goal-setting in forest policy and the means available for achieving the desired goal of forest policy are examined in this study. Examination of the goal is done using a macromodel of a closed economy. In the model GNP is assumed to be linearly dependent on the supply of raw wood. The model is used to derive the marginal conditions of the optimum equilibrium forestry with respect to the growing stock and the silviculture. The effect on the forest owners’ behaviour of the following means are examined: the taxation of ”pure income” from forestry, the taxation of income from selling raw wood, unit sales taxation and ad valorem sales taxation of forestry and corresponding sales subsidies, the support of silvicultural investments and the channelling of income from wood sales into silvicultural investments. The marginal conditions have been defined according to the maximum principle. An empirical study concerning the raw wood market in the case of softwood logs, and silvicultural investments in the case of young stand tending, has been carried out on the basis of the theoretical examination.

The PDF includes a summary in Finnish.

• Vehkamäki, E-mail: sv@mm.unknown

• Jåstad, Faculty of Environmental Sciences and Natural Resource Management, Norwegian University of Life Sciences, P.O. Box 5003, NO-1432 Ås, Norway https://orcid.org/0000-0002-1089-0284 E-mail: eirik.jastad@nmbu.no
• Nagel, Faculty of Environmental Sciences and Natural Resource Management, Norwegian University of Life Sciences, P.O. Box 5003, NO-1432 Ås, Norway https://orcid.org/0000-0002-3171-0262 E-mail: niels.oliver.nagel@nmbu.no
• Hu, Faculty of Environmental Sciences and Natural Resource Management, Norwegian University of Life Sciences, P.O. Box 5003, NO-1432 Ås, Norway https://orcid.org/0000-0003-0001-5993 E-mail: junhui.hu@nmbu.no
• Rørstad, Faculty of Environmental Sciences and Natural Resource Management, Norwegian University of Life Sciences, P.O. Box 5003, NO-1432 Ås, Norway E-mail: per.kristian.rorstad@nmbu.no

Forest operations involve several different actors. Each actor imposes their own requirements on the harvester in relation to their differing roles in the industry, whether they are concerned with the harvester itself, information, environmental concerns, etc. The manufacturers of harvesters need to meet the requirements imposed by multiple actors, among them logging contractors, whose survival depends on their harvesters. This paper aims to identify the present drivers of product development and describe the roles of the actors who have been identified as those currently affecting the development of harvesters. A multiple-case study of harvester manufacturers was conducted. In total, 4 cases were studied. Each case was comprised of five interviewees: two from each harvesting manufacturer, two logging contractors, and one dealer. Following 20 interviews and 3 validation interviews (with experts from both the industry and academia), the paper concludes that the present drivers of product development of harvesters are legislators, logging contractors, and expert and research organizations. Harvester manufacturers appear to develop harvesters aligned with requirements coming from both logging contractors and legislators. Logging contractors are the primary customers, and they prioritize requirements that reduce cost and improve work environments. Legislators, and expert and research organizations are supporting development in relation to current regulations.

• Gustafsson, Department of Accounting and Logistics, Linnaeus University, Universitetsplatsen 1, 352 52 Växjö, Sweden E-mail: asa.gustafsson@lnu.se
• Johansson, Department of Forestry and Wood Technology, Linnaeus University, 391 82 Kalmar, Sweden E-mail: jimmy.johansson@lnu.se

Due to changes in forest management in various European countries, hardwood forest areas and amounts will increase. Sustainable and individual utilization concepts have to be developed for the upcoming available resource. Studies conclude that there is low potential for hardwoods in the traditional appearance market thus the application areas have to be extended to new structural innovative products. This paper examines the extension to a future laminated beech wood supply network which would be a combination of already existing and new production facilities. For a better future use of hardwood raw materials it is necessary to consider the entire supply chain. This also better shows a total hardwood value chain. Therefore, this paper provides data to the solid hardwood business and develops a mixed integer linear programming to design a laminated beech wood supply network. The model is applied to Austria as the sample region. It covers the important strategic decisions where to locate a downstream facility within the existing production network with the lowest supply network cost. Fourteen scenarios are developed to examine various future network configurations. Results about optimal material flows and used sawmills as well as downstream production facilities are presented in form of material and financial performances. Two optimal laminated beech production locations are determined by the calculated scenarios results, and the impact of a new sawmill is analyzed which is focused on beech.

• Kühle, BOKU - University of Natural Resources and Life Sciences, Vienna, Department of Material Science and Process Engineering, and Renewable Institute of Wood Technology Materials, Konrad-Lorenz-Straße 24, 3430 Tulln, Austria E-mail: skuehle@boku.ac.at
• Teischinger, BOKU - University of Natural Resources and Life Sciences, Vienna, Department of Material Science and Process Engineering, and Renewable Institute of Wood Technology Materials, Konrad-Lorenz-Straße 24, 3430 Tulln, Austria E-mail: alfred.teischinger@boku.ac.at
• Gronalt, BOKU - University of Natural Resources and Life Sciences, Vienna, Department of Economics and Social Sciences, Institute of Production and Logistics, Feistmantelstraße 4, 1180 Vienna, Austria E-mail: manfred.gronalt@boku.ac.at

In Finland the increasing use of biofuel in transport presupposes a search for new raw material sources for biorefining. The aim of this study was, at the regional level, to compare the procurement costs of logging residues, stumps, delimbed stems and cereal straw for biorefining. The accumulation and procurement costs of forest chips and cereal straw were estimated within a 100-kilometre transporting distance via existing road network from an end-use-facility located in Kouvola in South-East Finland. The analyses were performed as simulated treatments in thinnings of young stands, cereal fields and regeneration fellings using existing productivity and cost functions and yield calculations based on crop statistics, the forest industry stand data and the sample plots data of the National Forest Inventory of Finland. Accumulation of raw material assortments and costs of production stages were defined per dry tonnes. Subsidies and raw material prices were excluded from consideration in the study. The results indicate that recovering logging residues requires lower costs than utilization of stumps, delimbed stems or cereal straw. Cereal straw represents an important source of biomass in Kouvola but the cost competiveness is poor compared the procurement costs of forest chips. When the annual procurement volume of biomass was 50 000 dry tonnes the cost at the plant was 49 € dry tonne ^–1 and biomass was comprised totally of logging residues. Procurement cost grew to 59 € dry tonne ^–1 when the annual procurement volume of biomass was doubled to 100 000 dry tonnes. Of that amount, the proportion of logging residues was 58.4%, stumps 24.3% and delimbed stems 17.3%. First cereal straw dry tonnes were delivered to end-use-facility, when procurement cost grew to 60 € dry tonne ^–1 and annual procurement volume of biomass was 110 000 dry tonnes.

• Laitila, Natural Resources Institute Finland (Luke), Bio-based Business and Industry, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: juha.laitila@luke.fi
• Lehtonen, Natural Resources Institute Finland (Luke), Green Technology, Halolantie 31A, FI-71750 Maaninka, Finland E-mail: eeva.lehtonen@luke.fi
• Ranta, Lappeenranta University of Technology, LUT School of Energy Systems, Laboratory of Bioenergy, Lönnrotinkatu 7, FI-50100 Mikkeli, Finland E-mail: tapio.ranta@luke.fi
• Anttila, Natural Resources Institute Finland (Luke), Bio-based Business and Industry, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: perttu.anttila@luke.fi
• Rasi, Natural Resources Institute Finland (Luke), Bio-based Business and Industry, Survontie 9A, FI-40500 Jyväskylä E-mail: saija.rasi@luke.fi
• Asikainen, Natural Resources Institute Finland (Luke), Bio-based Business and Industry, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: antti.asikainen@luke.fi

The present research focuses on the productivity of energy wood chipping operations at several sites in Italy. The aim was to assess the productivity and specifically the effect attributed to the operator in the chipping of wood biomass. The research included 172 trials involving 67 operators across the country that were analysed using a mixed model approach, in order to assess productivity, and to isolate the operator effect from other potential variables. The model was constructed using different predictors aiming to explain the variability due to the machines and the raw-materials. The final model included the average piece weight of raw material chipped as well as the power of the machine. The coefficients of determination (R²) were 0.76 for the fixed part of the model, and 0.88 when the effects due to the operators were included. The operators’ performance compared to their peers was established, and it was compared to a subjective classification based on the operator’s previous experience. The results of this study can help to the planning and logistics of raw material supply for bioenergy, as well as to a more effective training of future forest operators.

• Mola-Yudego, School of Forest Sciences, University of Eastern Finland, P.O. Box 111, FI-80101 Joensuu, Finland; NIBIO Norwegian Institute of Bioeconomy Research, P.O. Box 115, 1431 Ås, Norway http://orcid.org/0000-0003-0286-0170 E-mail: blas.mola@uef.fi
• Picchi, CNR IVALSA, Via Madonna del Piano 10, I-50019 Sesto Fiorentino, Italy E-mail: picchi@ivalsa.cnr.it
• Röser, Forest Feedstocks Group, FPInnovations, Vancouver, British Columbia, Canada E-mail: dominik.roser@fpinnovations.ca
• Spinelli, CNR IVALSA, Via Madonna del Piano 10, I-50019 Sesto Fiorentino, Italy E-mail: spinelli@ivalsa.cnr.it

• Holzleitner, Institute of Forest Engineering, Department of Forest and Soil Sciences, University of Natural Resources and Life Sciences, Peter Jordanstrasse 82/3, 1190 Vienna, Austria E-mail: franz.holzleitner@boku.ac.at
• Kanzian, Institute of Forest Engineering, Department of Forest and Soil Sciences, University of Natural Resources and Life Sciences, Peter Jordanstrasse 82/3, 1190 Vienna, Austria E-mail: christian.kanzian@boku.ac.at
• Höller, Institute of Forest Engineering, Department of Forest and Soil Sciences, University of Natural Resources and Life Sciences, Peter Jordanstrasse 82/3, 1190 Vienna, Austria E-mail: norbert.hoeller@boku.ac.at

• Zhang, Research Center for Resource Economics and Environment Management, Northwest A&F University. No. 3 Taicheng Road, Yangling, Shaanxi, China 712100 E-mail: hz@nn.fi
• Buongiorno, Department of Forest and Wildlife Ecology, University of Wisconsin-Madison, Madison, WI 53706, U.S.A. E-mail: jbuongio@wisc.edu

• Karttunen, Lappeenranta University of Technology, LUT Savo Sustainable Technologies, Mikkeli, Finland E-mail: kalle.karttunen@lut.fi
• Väätäinen, The Finnish Forest Research Institute, Joensuu, Finland E-mail: kari.vaatainen@metla.fi
• Asikainen, The Finnish Forest Research Institute, Joensuu, Finland E-mail: antti.asikainen@metla.fi
• Ranta, Lappeenranta University of Technology, LUT Savo Sustainable Technologies, Mikkeli, Finland E-mail: tapio.ranta@lut.fi

• Windisch, Finnish Forest Research Institute, Joensuu Research Unit, Yliopistokatu 6, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: johannes.windisch@metla.fi
• Sikanen, University of Eastern Finland, School of Forest Science, Yliopistokatu 7, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: ls@nn.fi
• Röser, Finnish Forest Research Institute, Joensuu Research Unit, Yliopistokatu 6, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: dr@nn.fi
• Gritten, University of Eastern Finland, School of Forest Science, Yliopistokatu 7, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: dg@nn.fi

• Gan, Department of Ecosystem Science and Management, Texas A&M University, Texas, USA E-mail: j-gan@tamu.edu
• Smith, Faculty of Forestry, University of Toronto, Ontario, Canada E-mail: cts@nn.ca

• Rørstad, Norwegian University of Life Sciences, Dept of Ecology and Natural Resource Management, Ås, Norway E-mail: per.kristian.rorstad@umb.no
• Trømborg, Norwegian University of Life Sciences, Dept of Ecology and Natural Resource Management, Ås, Norway E-mail: et@nn.no
• Bergseng, Norwegian University of Life Sciences, Dept of Ecology and Natural Resource Management, Ås, Norway E-mail: eb@nn.no
• Solberg, Norwegian University of Life Sciences, Dept of Ecology and Natural Resource Management, Ås, Norway E-mail: bs@nn.no

• Mola-Yudego, University of Eastern Finland, School of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: blas.mola@uef.fi

• Lönnstedt, SLU, Department of Forest Products, P.O. Box 7060, SE 750 07 Uppsala, Sweden E-mail: lars.lonnstedt@spm.slu.se

• Mutanen, Finnish Forest Research Institute, Joensuu Research Centre, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: antti.mutanen@metla.fi
• Toppinen, Finnish Forest Research Institute, Joensuu Research Centre, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: at@nn.fi

• Rantala, Finnish Forest Research Institute, Suonenjoki Research Station, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: juho.rantala@metla.fi

• Alig, USDA Forest Service, Forestry Sciences Lab, 3200 SW Jefferson Way, Corvallis, Oregon 97331, USA E-mail: ralig@fs.fed.us
• Adams, College of Forestry, Oregon State University, Corvallis, Oregon 97331, USA E-mail: da@nn.us
• Mills, USDA Forest Service, Forestry Sciences Lab, 1221 SW Yamhill, Portland, Oregon 97205, USA E-mail: jm@nn.us
• Haynes, USDA Forest Service, Forestry Sciences Lab, 1221 SW Yamhill, Portland, Oregon 97205, USA E-mail: rh@nn.us
• Ince, USDA Forest Service, Forest Products Lab, Madison, Wisconsin 53705, USA E-mail: pi@nn.us
• Moulton, USDA Forest Service (retired), Research Triangle Park, North Carolina 27709, USA E-mail: rm@nn.us

• de Miguel-Díez, Eberswalde University for Sustainable Development, Department of Forest Utilization and Timber Markets, Eberswalde, Germany; University of Freiburg, Chair of Forest Operations, Freiburg, Germany https://orcid.org/0000-0002-3800-7449 E-mail: felipe.diez@hnee.de
• Purfürst, University of Freiburg, Chair of Forest Operations, Freiburg, Germany https://orcid.org/0000-0001-9661-0193 E-mail: thomas.purfuerst@foresteng.uni-freiburg.de
• Acuna, University of the Sunshine Coast, Forest Research Institute, Sunshine Coast, Queensland, Australia E-mail: macuna@usc.edu.au
• Tolosana-Esteban, Universidad Politécnica de Madrid, E.T.S.I. Montes, Forestal y del Medio Natural, Madrid, Spain https://orcid.org/0000-0003-2561-0342 E-mail: eduardo.tolosana@upm.es
• Cremer, Eberswalde University for Sustainable Development, Department of Forest Utilization and Timber Markets, Eberswalde, Germany https://orcid.org/0000-0001-7866-944X E-mail: Tobias.Cremer@hnee.de

This review systematically analyses and classifies research and review papers focusing on discrete event simulation applied to wood transport, and therefore illustrates the development of the research area from 1997 until 2017. Discrete event simulation allows complex supply chain models to be mapped in a straightforward manner to study supply chain dynamics, test alternative strategies, communicate findings and facilitate understanding of various stakeholders. The presented analyses confirm that discrete event simulation is well-suited for analyzing interconnected wood supply chain transportation issues on an operational and tactical level. Transport is the connective link between interrelated system components of the forest products industry. Therefore, a survey on transport logistics allows to analyze the significance of entire supply chain management considerations to improve the overall performance and not only one part in isolation. Thus far, research focuses mainly on biomass, unimodal truck transport and terminal operations. Common shortcomings identified include rough explanations of simulation models and sparse details provided about the verification and validation processes. Research gaps exist concerning simulations of entire, resilient and multimodal wood supply chains as well as supply and demand risks. Further studies should expand upon the few initial attempts to combine various simulation methods with optimization.

• Kogler, Institute of Production and Logistics, Department of Economics and Social Sciences, University of Natural Resources and Life Sciences, Vienna, Feistmantelstrasse 4, A-1180 Vienna, Austria https://orcid.org/0000-0001-8811-152X E-mail: christoph.kogler@boku.ac.at
• Rauch, Institute of Production and Logistics, Department of Economics and Social Sciences, University of Natural Resources and Life Sciences, Vienna, Feistmantelstrasse 4, A-1180 Vienna, Austria http://orcid.org/0000-0002-5812-4415 E-mail: peter.rauch@boku.ac.at

• Zhang, School of Forestry & Wildlife Sciences, Auburn University, AL 36849-5418, USA E-mail: yaoqi.zhang@auburn.edu
• Zhang, School of Forestry & Wildlife Sciences, Auburn University, AL 36849-5418, USA E-mail: dz@nn.us
• Schelhas, Southern Research Station, USDA Forest Service, Tuskegee University, AL, USA E-mail: js@nn.us

• Röser, Finnish Forest Research Institute, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: dominik.roser@metla.fi
• Mola-Yudego, University of Eastern Finland, School of Forest Sciences, Joensuu, Finland E-mail: bmy@nn.fi
• Prinz, Finnish Forest Research Institute, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: rp@nn.fi
• Emer, University of Padova, Department of Land, Agriculture and Forest Systems, Legnaro (PD), Italy E-mail: be@nn.it
• Sikanen, University of Eastern Finland, School of Forest Sciences, Joensuu, Finland E-mail: ls@nn.fi

• Lindroos, Department of Forest Resource Management, Swedish University of Agricultural Sciences, Umeå, Sweden E-mail: ola.lindroos@srh.slu.se
• Matisons, Department of Forest Resource Management, Swedish University of Agricultural Sciences, Umeå, Sweden E-mail: mm@nn.se
• Johansson, Sveaskog Förvaltnings AB, Vindeln, Sweden E-mail: pj@nn.se
• Nordfjell, Department of Forest Resource Management, Swedish University of Agricultural Sciences, Umeå, Sweden E-mail: tn@nn.se