Sandhya Samarasinghe, Don Kulasiri

Stress intensity factor of wood from crack-tip displacement fields obtained from digital image processing

Samarasinghe S., Kulasiri D. (2004). Stress intensity factor of wood from crack-tip displacement fields obtained from digital image processing. Silva Fennica vol. 38 no. 3 article id 415. https://doi.org/10.14214/sf.415

Abstract

Stress intensity factor of radiata pine (Pinus radiata) in Tangential-Longitudinal opening mode was determined from crack-tip displacement fields obtained from digital image correlation in conjunction with orthotropic fracture theory. For lower loads, experiments agreed with the linear elastic fracture theory but for higher loads, stress intensity factor and load relationship was nonlinear. For 41% of the specimens tested, tip-displacement based stress intensity factor agreed with that based on the ASTM standard formula for lower loads but deviated for higher loads closer to failure. The tip displacement plots showed that the nonlinear behaviour is due to large displacements which we attributed to large plastic deformations and/or micro-cracking in this region. The other 59% specimens showed a similar trend except that the crack-tip based stress intensity factor was consistently higher than the value obtained from the standard formula. The fracture toughness from tip displacements was larger than the standard values for all specimens and the two were related by a logarithmic function with an R2 of 0.61. The study also established that fracture toughness increases with the angle of inclination of the original crack plane to the Radial Longitudinal plane.

Keywords
Pinus radiata; wood; fracture toughness; stress intensity factor; digital image correlation; orthotropic fracture theory

Received 13 May 2003 Accepted 5 July 2004 Published 31 December 2004

Views 7647

Available at https://doi.org/10.14214/sf.415 | Download PDF