Current issue: 58(2)

Under compilation: 58(3)

Scopus CiteScore 2021: 2.8
Scopus ranking of open access forestry journals: 8th
PlanS compliant
Select issue
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles containing the keyword 'regeneration method'

Category : Article

article id 5243, category Article
Eljas Pohtila, Tapani Pohjola. (1985). Maan kunnostus männyn viljelyssä Lapissa. Silva Fennica vol. 19 no. 3 article id 5243. https://doi.org/10.14214/sf.a15422
English title: Soil preparation in reforestation of Scots pine in Lapland.
Original keywords: mänty; istutus; kulotus; maanmuokkaus; Lappi; laikutus; lautasauraus; uudistustavat; hajakylvö
English keywords: Pinus sylvestris; soil preparation; Scots pine; planting; regeneration methods; scalping; prescribed burning; disc ploughing; broadcast sowing
Abstract | View details | Full text in PDF | Author Info

The study deals with the interaction of various soil preparation and reforestation methods. The most favourable time of the year for broadcast sowing and the effect of stabilization after soil preparation on restocking were studied as special problems.

Prescribed burning, scalping and disc ploughing made a better combination with sowing than planting, and ploughing better combination with planting than sowing. The longer the period was between sowing and germination the fewer seedlings emerged. The best stocking was clearly resulted with sowing in June. Stabilization of soil after preparation had a negative effect on reforestation results.

The PDF includes a summary in English.

  • Pohtila, E-mail: ep@mm.unknown (email)
  • Pohjola, E-mail: tp@mm.unknown
article id 5191, category Article
Juha Lappi. (1983). Metsänuudistamisen vaatiman ajan merkitys uudistamispäätöksissä. Silva Fennica vol. 17 no. 3 article id 5191. https://doi.org/10.14214/sf.a15174
English title: Elevation of the time factor in reforestation decisions.
Original keywords: metsänuudistaminen; metsäsuunnittelu; kustannukset; uudistamisen viivästyminen; uudistumisaika; normaalimetsälaskelma; nollakorkomenetelmä; päätehakkuuikä; nykyarvomenetelmä
English keywords: forest planning; net present value; forest regeneration; cost of time delay; regeneration costs; final cutting age; regeneration method; zero percent interest rate
Abstract | View details | Full text in PDF | Author Info

Length of the regeneration period is a criterion commonly used for comparing different reforestation methods. The time factor should be evaluated using a realistic system for long-term planning. In this paper the preliminary evaluation is made by simplified calculations based on the development series. The slow regeneration method is assumed to be otherwise equal to the rapid one but it has a 5- or 10-years delay at the beginning, and the rotation is thus the final cutting age plus 5- or 10-years delay. Cost of the time delay is taken to be the difference in reforestation costs that makes the rapid and the slow methods equivalent. Calculations are made using zero costs for the slow method; but if the cost of the slow method increases, the critical cost difference decreases very slowly. The final cutting age and the regeneration method must be decided simultaneously. Therefore, the cost of the time delay is presented as a function of final cutting age. By maximizing the average annual revenue, rotation can be even increased if more rapid but more expensive regeneration method is used.

The PDF includes a summary in English.

  • Lappi, E-mail: jl@mm.unknown (email)

Category : Research article

article id 191, category Research article
Katri Luostarinen, Noora Huotari, Eila Tillman-Sutela. (2009). Effect of regeneration method on growth, wood density and fibre properties of downy birch (Betula pubescens Ehrh.). Silva Fennica vol. 43 no. 3 article id 191. https://doi.org/10.14214/sf.191
Keywords: coppice; fibre length; fibre width; regeneration methods; wood properties
Abstract | View details | Full text in PDF | Author Info
Short rotation tree stands, established by coppicing, are nowadays used mainly for energy purposes in Fennoscandia, but their usage for pulp raw material may increase in the future. Downy birch (Betula pubescens), which is commonly used for pulp production in boreal zone, has good sprouting capacity. However, it is not known if the fibre properties of sprout-originated downy birches differ from those of seed-originated ones. Therefore, fibre length and width of sprout- and seed-originated downy birches grown on fertile soil were measured at a stand age of 25 years. Additionally annual ring width, stem height and diameter, and wood density were studied to compare the growth and wood properties of sprout- and seed-originated birches. Annual rings were slightly wider in sprout- than in seed-originated birches, whereas no differences were observed in wood density. Fibres, too, were slightly longer and wider in sprout- than in seed-originated trees. Still these minor differences observed here are hardly significant for the industries using birch wood. Consequently downy birch wood from coppiced stands is well suited for pulp. The advantages of coppice, i.e. rapidity and low costs of establishment, productivity, and the ability of downy birch to grow on untypical forest sites, may even increase the importance of the wood coming from coppiced birch stands in the future.
  • Luostarinen, Faculty of Forest Sciences, University of Joensuu, P.O. Box 111, FI-80101, Joensuu, Finland E-mail: katri.luostarinen@joensuu.fi (email)
  • Huotari, Finnish Forest Research Institute, Muhos Research Unit, Kirkkosaarentie, FI-91500 Muhos, Finland E-mail: nh@nn.fi
  • Tillman-Sutela, Finnish Forest Research Institute, Muhos Research Unit, Kirkkosaarentie, FI-91500 Muhos, Finland E-mail: ets@nn.fi

Register
Click this link to register to Silva Fennica.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles