Current issue: 58(5)

Scopus CiteScore 2023: 3.5
Scopus ranking of open access forestry journals: 17th
PlanS compliant
Select issue
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Silva Fennica vol. 50 | 2016

Category : Research article

article id 1689, category Research article
Juha Laitila, Eeva Lehtonen, Tapio Ranta, Perttu Anttila, Saija Rasi, Antti Asikainen. (2016). Procurement costs of cereal straw and forest chips for biorefining in South-East Finland. Silva Fennica vol. 50 no. 5 article id 1689. https://doi.org/10.14214/sf.1689
Keywords: supply chains; stumps; young stands; logging residues; delimbed stems; agrobiomass
Highlights: Procurement cost at the plant was 59 € dry tonne –1 when the annual procurement volume of biomass was 100 000 tonnes. Of that amount, the proportion of logging residues was 58.4%, stumps 24.3% and delimbed stems 17.3%; Cereal straw represents an important source of biomass in Kouvola but the cost competiveness is poor compared the procurement costs of forest chips due to high baling and transporting costs.
Abstract | Full text in HTML | Full text in PDF | Author Info

In Finland the increasing use of biofuel in transport presupposes a search for new raw material sources for biorefining. The aim of this study was, at the regional level, to compare the procurement costs of logging residues, stumps, delimbed stems and cereal straw for biorefining. The accumulation and procurement costs of forest chips and cereal straw were estimated within a 100-kilometre transporting distance via existing road network from an end-use-facility located in Kouvola in South-East Finland. The analyses were performed as simulated treatments in thinnings of young stands, cereal fields and regeneration fellings using existing productivity and cost functions and yield calculations based on crop statistics, the forest industry stand data and the sample plots data of the National Forest Inventory of Finland. Accumulation of raw material assortments and costs of production stages were defined per dry tonnes. Subsidies and raw material prices were excluded from consideration in the study. The results indicate that recovering logging residues requires lower costs than utilization of stumps, delimbed stems or cereal straw. Cereal straw represents an important source of biomass in Kouvola but the cost competiveness is poor compared the procurement costs of forest chips. When the annual procurement volume of biomass was 50 000 dry tonnes the cost at the plant was 49 € dry tonne –1 and biomass was comprised totally of logging residues. Procurement cost grew to 59 € dry tonne –1 when the annual procurement volume of biomass was doubled to 100 000 dry tonnes. Of that amount, the proportion of logging residues was 58.4%, stumps 24.3% and delimbed stems 17.3%. First cereal straw dry tonnes were delivered to end-use-facility, when procurement cost grew to 60 € dry tonne –1 and annual procurement volume of biomass was 110 000 dry tonnes.

  • Laitila, Natural Resources Institute Finland (Luke), Bio-based Business and Industry, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: juha.laitila@luke.fi (email)
  • Lehtonen, Natural Resources Institute Finland (Luke), Green Technology, Halolantie 31A, FI-71750 Maaninka, Finland E-mail: eeva.lehtonen@luke.fi
  • Ranta, Lappeenranta University of Technology, LUT School of Energy Systems, Laboratory of Bioenergy, Lönnrotinkatu 7, FI-50100 Mikkeli, Finland E-mail: tapio.ranta@luke.fi
  • Anttila, Natural Resources Institute Finland (Luke), Bio-based Business and Industry, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: perttu.anttila@luke.fi
  • Rasi, Natural Resources Institute Finland (Luke), Bio-based Business and Industry, Survontie 9A, FI-40500 Jyväskylä E-mail: saija.rasi@luke.fi
  • Asikainen, Natural Resources Institute Finland (Luke), Bio-based Business and Industry, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: antti.asikainen@luke.fi
article id 1680, category Research article
Liisa Kulmala, Indre Žliobaitė, Eero Nikinmaa, Pekka Nöjd, Pasi Kolari, Kourosh Kabiri Koupaei, Jaakko Hollmén, Harri Mäkinen. (2016). Environmental control of growth variation in a boreal Scots pine stand – a data-driven approach. Silva Fennica vol. 50 no. 5 article id 1680. https://doi.org/10.14214/sf.1680
Keywords: height growth; diameter growth; Gross primary production; turgor pressure; predictive modelling; Least Angle Regression
Highlights: High water potential and carbon gain during bud forming favoured height growth; High water potential during the elongation period favoured height growth; A spring with high carbon gain favoured diameter growth; The obtained regression models had generally low generalization performance.
Abstract | Full text in HTML | Full text in PDF | Author Info

Despite the numerous studies on year-to-year variation of tree growth, the physiological mechanisms controlling annual variation in growth are still not understood in detail. We studied the applicability of data-driven approach i.e. different regression models in analysing high-dimensional data set including continuous and comprehensive measurements over meteorology, ecosystem-scale water and carbon fluxes and the annual variation in the growth of app. 50-year-old Scots pine stand in southern Finland. Even though our dataset covered only 16 years, it is the most extensive collection of interactions between a Scots pine ecosystem and atmosphere. The analysis revealed that height growth was favoured by high water potential of the tree and carbon gain during the bud forming period and high water potential during the elongation period. Diameter growth seemed to be favoured by a winter with high precipitation and deep snow cover and a spring with high carbon gain. The obtained models had low generalization performance and they would require more evaluation and iterative validation to achieve credibility perhaps as a mixture of data-driven and first principle modeling approaches.

  • Kulmala, University of Helsinki, Department of Forest Sciences, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: liisa.kulmala@helsinki.fi (email)
  • Žliobaitė, Aalto University, Department of Computer Science and Helsinki Institute for Information Technology, P.O. Box 11000, FI-00076 Aalto, Finland; University of Helsinki, Department of Geosciences and Geography, P.O. Box 64, FI-00014 University of Helsinki, Finland E-mail: zliobaite@gmail.com
  • Nikinmaa, University of Helsinki, Department of Forest Sciences, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: eero.nikinmaa@helsinki.fi
  • Nöjd, Natural Resources Institute Finland (Luke), Bio-based business and industry, Tietotie 2, FI-02150 Espoo, Finland E-mail: pekka.nojd@luke.fi
  • Kolari, University of Helsinki, Department of Forest Sciences, P.O. Box 27, FI-00014 University of Helsinki, Finland; University of Helsinki, Department of Physics, P.O. Box 64, FI-00014 University of Helsinki, Finland E-mail: pasi.kolari@helsinki.fi
  • Kabiri Koupaei, University of Helsinki, Department of Forest Sciences, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: kourosh.kabiri@helsinki.fi
  • Hollmén, Aalto University, Department of Computer Science and Helsinki Institute for Information Technology, P.O. Box 11000, FI-00076 Aalto, Finland; University of Helsinki, Department of Geosciences and Geography, P.O. Box 64, FI-00014 University of Helsinki, Finland E-mail: jaakko.hollmen@aalto.fi
  • Mäkinen, Natural Resources Institute Finland (Luke), Bio-based business and industry, Tietotie 2, FI-02150 Espoo, Finland E-mail: harri.makinen@luke.fi
article id 1672, category Research article
Maiju Peura, María Triviño, Adriano Mazziotta, Dmitry Podkopaev, Artti Juutinen, Mikko Mönkkönen. (2016). Managing boreal forests for the simultaneous production of collectable goods and timber revenues. Silva Fennica vol. 50 no. 5 article id 1672. https://doi.org/10.14214/sf.1672
Keywords: forest management; multifunctional forestry; mushroom; trade-offs; wildberry
Highlights: We found a strong conflict between bilberry production and timber revenues, resulting in large losses of timber revenues when increasing bilberry production; The conflicts between other collectables (cowberry, cep) and timber production were relatively small; With careful forest planning, there is potential to simultaneously produce high levels of collectable goods and timber revenues in the landscape.
Abstract | Full text in HTML | Full text in PDF | Author Info

Timber production is an economically important provisioning ecosystem service in forests, but is often in conflict with the provision of other ecosystem services. In multifunctional forestry, the production of timber and non-timber ecosystem services should coexist in the same landscape. To this end, we explored the capacity of a boreal landscape to simultaneously produce collectable goods bilberry (Vaccimium myrtillus L.), cowberry (Vaccinium vitis-idaea L.) and cep (Boletus edulis Bull.) alongside timber revenues. We also identified optimal forest management plans to achieve this. Furthermore, we analyzed trade-offs between collectable good yields and timber production, as well as between their economic values. We ran forest growth simulations under seven alternative management regimes at a landscape level across 50-year planning horizons. Then, we used multi-objective optimization to explore trade-offs and identify optimal forest management plans. The results showed that the strongest trade-off was between bilberry and timber production, resulting in a large loss in timber revenues for a gain in bilberry production. However, the conflicts between other collectables and timber production were relatively small: it was possible to increase the provision of collectable goods 4–15% with small reductions (35%) from timber revenues. With careful forest planning, there is the potential to simultaneously produce high levels of collectable goods and timber revenues in the landscape.

  • Peura, University of Jyvaskyla, Department of Biological and Environmental Sciences, P.O. Box 35, FI-40014, University of Jyväskylä, Finland E-mail: maiju.h.peura@jyu.fi (email)
  • Triviño, University of Jyvaskyla, Department of Biological and Environmental Sciences, P.O. Box 35, FI-40014, University of Jyväskylä, Finland E-mail: maria.trivino@jyu.fi
  • Mazziotta, University of Jyvaskyla, Department of Biological and Environmental Sciences, P.O. Box 35, FI-40014, University of Jyväskylä, Finland; Center for Macroecology, Evolution and Climate, Natural History Museum of Denmark, University of Copenhagen, Universitetsparken 15, DK-2100 Copenhagen, Denmark E-mail: adriano.mazziotta@snm.ku.dk
  • Podkopaev, University of Jyvaskyla, Department of Biological and Environmental Sciences, P.O. Box 35, FI-40014, University of Jyväskylä, Finland; Systems Research Institute, Polish Academy of Sciences, Newelska 6, 01-447 Warsaw, Poland E-mail: dmitry.podkopaev@gmail.com
  • Juutinen, Natural Resources Institute Finland (Luke), Economics and Society, P.O. Box 413, FI-90014 University of Oulu, Finland; University of Oulu, Department of Economics, P.O. Box 4600, FI-90014 University of Oulu, Finland E-mail: artti.juutinen@luke.fi
  • Mönkkönen, University of Jyvaskyla, Department of Biological and Environmental Sciences, P.O. Box 35, FI-40014, University of Jyväskylä, Finland E-mail: mikko.monkkonen@jyu.fi
article id 1615, category Research article
Minna Blomqvist, Päivi Lyytikäinen-Saarenmaa, Tuula Kantola, Maiju Kosunen, Mervi Talvitie, Markus Holopainen. (2016). Impacts of natural enemies and stand characteristics on cocoon mortality of the pine sawfly Diprion pini in a Fennoscandian boreal forest. Silva Fennica vol. 50 no. 5 article id 1615. https://doi.org/10.14214/sf.1615
Keywords: needle loss; Diprionidae; population dynamics; forest floor vegetation; parasitism; predation
Highlights: Annual cocoon mortality caused by natural enemies varied between 66% and 80% during the six-year study period, most of it caused by the family Ichneumonidae; Basal area, and coverage of lichen (Lichenes) and lingonberry (Vaccinium vitis-idaea L.) best explained cocoon parasitism and predation; Combination of suitable stand characteristics, abiotic environmental factors, and incomplete control by natural enemies enabled pest species to extend its gradation phase.
Abstract | Full text in HTML | Full text in PDF | Author Info

We investigated the impact of natural enemies on the cocoon mortality of the common pine sawfly (Diprion pini L.) during a six-year period in eastern Finland. The enemies were classified into parasitoids (insect families Chalcidoidea, Ichneumonidae, and Tachinidae), and predators (birds, small mammals, and insect families Elateridae and Carabidae). The appearance of D. pini was estimated as the intensity of annual defoliation. The impact of stand characteristics on the performance of parasitoids and predators was also investigated. Influence of the natural enemy complex on cocoon mortality of D. pini was nearly stable, but defoliation intensity slowly declined towards the end of the study period. Annual cocoon mortality by natural enemies varied between 66% and 80%. Our results verified that the most significant mortality factors were ichneumonid parasitoids and small mammals. Random Forest classification indicated that stand characteristics, such as basal area, and coverage of lichen (Lichenes) and lingonberry (Vaccinium vitis-idaea L.) affected the performance of parasites and predators. We suggest that a combination of optimal stand characteristics, abiotic environmental factors and mild to moderate control by natural enemies acted as drivers, which drove the pine sawfly population to extended gradation. For future forest health management, detailed information on abiotic and biotic regulating factors, along with long-term monitoring campaigns for conifer sawflies are needed to adapt Fennoscandian forests to altered climatic and silvicultural conditions.

  • Blomqvist, University of Helsinki, Department of Forest Sciences, P.O. Box 27 (Latokartanonkaari 7), FI-00014 University of Helsinki, Finland ORCID http://orcid.org/0000-0003-2328-8839 E-mail: minna.blomqvist@helsinki.fi (email)
  • Lyytikäinen-Saarenmaa, University of Helsinki, Department of Forest Sciences, P.O. Box 27 (Latokartanonkaari 7), FI-00014 University of Helsinki, Finland E-mail: paivi.lyytikainen-saarenmaa@helsinki.fi
  • Kantola, Knowledge Engineering Laboratory, Department of Entomology, Texas A&M University, College Station, TX 77843-2475, USA E-mail: tuula.kantola@helsinki.fi
  • Kosunen, University of Helsinki, Department of Forest Sciences, P.O. Box 27 (Latokartanonkaari 7), FI-00014 University of Helsinki, Finland E-mail: maiju.kosunen@helsinki.fi
  • Talvitie, University of Helsinki, Department of Forest Sciences, P.O. Box 27 (Latokartanonkaari 7), FI-00014 University of Helsinki, Finland E-mail: mervi.talvitie@dnainternet.net
  • Holopainen, University of Helsinki, Department of Forest Sciences, P.O. Box 27 (Latokartanonkaari 7), FI-00014 University of Helsinki, Finland E-mail: markus.holopainen@helsinki.fi
article id 1566, category Research article
Valdir Marcos Stefenon, Jordana Caroline Nagel, Igor Poletto. (2016). Evidences of genetic bottleneck and fitness decline in Luehea divaricata populations from southern Brazil. Silva Fennica vol. 50 no. 5 article id 1566. https://doi.org/10.14214/sf.1566
Keywords: demographic history; effective population size; genetic resources conservation; Pampa biome
Highlights: Signatures of genetic bottlenecks and reduction of populations’ fitness were observed in populations of Luehea divaricata in southern Brazil; Lower levels of observed heterozygosity are correlated with populations’ fitness, decreasing germination capacity and increasing the proportion of anomalous germinated plantlets; Promoting the connection among populations is proposed as a key strategy towards conservation of L. divaricata genetic resources in its southernmost distribution range.
Abstract | Full text in HTML | Full text in PDF | Author Info

Extant populations growing in regions that were refugia during the last glacial period are expected to show higher genetic diversity than populations that moved from these refugia into new areas in higher latitudes. Such new populations likely faced harsher climatic conditions, being established with reduced population size and experiencing the effects of genetic bottlenecks. In this study we employed data from nuclear SSR markers for detecting molecular signatures of genetic bottlenecks, and germination experiments to evaluate reduction of populations’ fitness in natural populations of Luehea divaricata Mart. et Zucc., growing in the southern range of the species distribution (around 30°S latitude). Signatures of genetic bottlenecks and reduction of populations’ fitness were observed in all populations. Lower levels of observed heterozygosity are correlated with populations’ fitness, decreasing germination capacity and increasing the proportion of anomalous germinated plantlets. Promoting the connection among populations is proposed as a key strategy towards conservation of L. divaricata genetic resources in its southernmost distribution range. The offspring from crosses among populations would significantly increase the observed heterozygosity and fitness of multiple populations.

  • Stefenon, Nucleus of Genomics and Molecular Ecology, Interdisciplinary Center of Biotechnological Research, Universidade Federal do Pampa, BR290 km, 97300-000, São Gabriel, RS, Brazil E-mail: valdirstefenon@unipampa.edu.br (email)
  • Nagel, Nucleus of Genomics and Molecular Ecology, Interdisciplinary Center of Biotechnological Research, Universidade Federal do Pampa, BR290 km, 97300-000, São Gabriel, RS, Brazil E-mail: jordana.nagel@yahoo.com.br
  • Poletto, Laboratory of Plant Protection, Universidade Federal do Pampa, BR290 km, 97300-000, São Gabriel, RS, Brazil E-mail: igorpoletto@unipampa.edu.br
article id 1687, category Research article
Hannu Hökkä, Jori Uusitalo, Harri Lindeman, Jari Ala-Ilomäki. (2016). Performance of weather parameters in predicting growing season water table depth variations on drained forested peatlands – a case study from southern Finland. Silva Fennica vol. 50 no. 4 article id 1687. https://doi.org/10.14214/sf.1687
Keywords: peatland; precipitation; bearing capacity; evapotranspiration; mixed linear model; water table depth
Highlights: Four-week precipitation and evapotranspiration explain much of drained peatland water table depth variation during a growing season.
Abstract | Full text in HTML | Full text in PDF | Author Info

The amount of water in peat soil is one factor affecting its bearing capacity, which is a crucial aspect in planning peatland timber harvesting operations. We studied the influence of weather variables on the variation of drained peatland growing season water conditions, here the ground water table depth (WTD). WTD was manually monitored four times in 2014 and three times in 2015 in 10–30 sample plots located in four drained peatland forests in south-western Finland. For each peatland, precipitation and evapotranspiration were calculated from the records of the nearest Finnish Meteorological Institute field stations covering periods from one day to four weeks preceding the WTD monitoring date. A mixed linear model was constructed to investigate the impact of the weather parameters on WTD. Precipitation of the previous four–week period was the most important explanatory variable. The four-week evapotranspiration amount was interacting with the Julian day showing a greater effect in late summer. Other variables influencing WTD were stand volume within the three-metre radius sample plot and distance from nearest ditch. Our results show the potential of weather parameters, specifically that of the previous four-week precipitation and evapotranspiration, for predicting drained peatland water table depth variation and subsequently, the possibility to develop a more general empirical model to assist planning of harvesting operations on drained peatlands.

  • Hökkä, Natural Resources Institute Finland (Luke), Management and Production of Renewable Resources, Paavo Havaksen tie 3, FI-90014 Oulun yliopisto, Finland E-mail: hannu.hokka@luke.fi (email)
  • Uusitalo, Natural Resources Institute Finland (Luke), Green Technology, Kaironiementie 15, FI-39700 Parkano, Finland E-mail: jori.uusitalo@luke.fi
  • Lindeman, Natural Resources Institute Finland (Luke), Green Technology, Kaironiementie 15, FI-39700 Parkano, Finland E-mail: harri.lindeman@luke.fi
  • Ala-Ilomäki, Natural Resources Institute Finland (Luke), Green Technology, Jokiniemenkuja 1, FI-01370 Vantaa, Finland E-mail: jari.ala-ilomaki@luke.fi
article id 1682, category Research article
Jiří Korecký, Yousry A. El-Kassaby. (2016). Pollination dynamics variation in a Douglas-fir seed orchard as revealed by microsatellite analysis. Silva Fennica vol. 50 no. 4 article id 1682. https://doi.org/10.14214/sf.1682
Keywords: selfing; Pseudotsuga menziesii (Mirb.) Franco; genetic quality; pedigree reconstruction; gametic contribution; pollen contamination
Highlights: Important characteristics such as parental reproductive success, pollen contamination, and selfing rate in the second generation Douglas-fir seed orchard have been estimated; Since this research is a part of a multi-year study, outputs were compared to those from two other years; Results are in line and differences in pollination dynamics across years are attributable to the various crop management practices.
Abstract | Full text in HTML | Full text in PDF | Author Info

As part of a multi-year monitoring study of pollination dynamics in a second generation Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco) seed orchard, we estimated with the aid of eight microsatellite markers three important reproductive biology characteristics affecting the genetic worth and diversity of seed crops; namely parental reproductive success, pollen contamination, and selfing rate. The obtained results were compared to those from two previous years to gauge appropriate seed crop management practices and ultimately allow approximate generalization of seed crop genetic quality. We determined that 80% of parental gametes were produced by 52% of the parents, 13% of paternal gametes resulted from pollen contamination (i.e., gene flow), and 12% of the seed were the product of selfing. The obtained results were in line with those observed for 2005 and 2009 where 80% of gametes being produced by 37–48% of the parents, 10–18% pollen contamination, and 15–17% selfing rate. The observed reproductive biology parameters differences are attributable to the various crop management practices implemented (i.e., bloom delay and supplemental-mass-pollination) across years and calls for justification due to the observed minimal differences on seed crops genetic quality.

  • Korecký, Department of Genetics and Physiology of Forest Trees, Faculty of Forestry and Wood Sciences, Czech University of Life Sciences Prague, Praha 6, 165 21, Czech Republic ORCID http://orcid.org/0000-0001-7859-1750 E-mail: korecky@fld.czu.cz (email)
  • El-Kassaby, Department of Forest and Conservation Sciences, Faculty of Forestry, University of British Columbia, Vancouver, BC, V6T 1Z4, Canada ORCID http://orcid.org/0000-0002-4887-8977 E-mail: y.el-kassaby@ubc.ca
article id 1663, category Research article
Marta Kempf, Monika Konnert. (2016). Distribution of genetic diversity in Fagus sylvatica at the north-eastern edge of the natural range. Silva Fennica vol. 50 no. 4 article id 1663. https://doi.org/10.14214/sf.1663
Keywords: Poland; nSSR markers; European beech; limit of natural distribution
Highlights: European beech at the north-eastern edge of its natural range in Poland have a high level of genetic variation, similar to the populations from Central Europe; The differences between the beech provenances from the two centres in Poland, which were previously identified on the basis of pollen analyses and phenotypic traits, have now been genetically confirmed.
Abstract | Full text in HTML | Full text in PDF | Author Info

An understanding of the genetic variation of the beech, especially at the edge of its natural distribution, is essential because of the change in natural distribution of the species resulting from changing climatic conditions. The main aim of the study was to determine the level of genetic diversity of European beech at the north-eastern edge of its natural range. The other aim was to check the genetic variation of beech from the two centres, the north and the south of Poland, which were identified in previous findings based on pollen analyses and phenotypic traits. The research material was the progeny of twelve beech provenances. The genetic structure of the populations was determined by ten highly variable microsatellite DNA loci. The results confirmed the high genetic diversity of beech at the north-eastern edge of its natural distribution, which infers the probability of their good adaptation to the changing climate and an extension of the range. Genetic analyses confirmed the existence of two genetic centres for beech in Poland. The populations from south-eastern Poland had a slightly higher diversity than the populations from the north-western area, which may indicate that the colonisation of Poland occurred by two routes. The results are important for creating the borders of the provenance regions and for limiting the transfer of seeds and seedlings. The choice of forest reproductive material, based on the knowledge of genetic diversity, is very important for the stability of future forests.

  • Kempf, Department of Genetics and Forest Tree Breeding, Faculty of Forestry, University of Agriculture in Krakow, Al. 29-listopada 46, 31–425 Krakow E-mail: m.kempf@ur.krakow.pl (email)
  • Konnert, Bavarian Office for Forest Seeding and Planting, Forstamtsplatz 1, 83317 Teisendorf, Germany E-mail: monika.konnert@asp.bayern.de
article id 1628, category Research article
Jürgen Aosaar, Ülo Mander, Mats Varik, Hardo Becker, Gunnar Morozov, Martin Maddison, Veiko Uri. (2016). Biomass production and nitrogen balance of naturally afforested silver birch (Betula pendula Roth.) stand in Estonia. Silva Fennica vol. 50 no. 4 article id 1628. https://doi.org/10.14214/sf.1628
Keywords: aboveground biomass; birch; afforestation; soil carbon; land use change; agricultural land; nitrogen budget
Highlights: Leafless aboveground biomass of the 17-year-old natural silver birch stand growing in abandoned agricultural land reached 94 Mg ha–1; The largest fluxes in N budget were net nitrogen mineralization and gaseous N2-N emission; Nitrogen leaching was low; Soil N content increased with the stand age, soil C content remained stable; N2O and N2 fluxes in boreal deciduous forest were analysed.
Abstract | Full text in HTML | Full text in PDF | Author Info

Silver birch (Betula pendula Roth.) is one of the main pioneer tree species occupying large areas of abandoned agricultural lands under natural succession in Estonia. We estimated aboveground biomass (AGB) dynamics during 17 growing seasons, and analysed soil nitrogen (N) and carbon (C) dynamics for 10 year period in a silver birch stand growing on former arable land. Main N fluxes were estimated and nitrogen budget for 10-year-old stand was compiled. The leafless AGB and stem mass of the stand at the age of 17-years were 94 and 76 Mg ha–1 respectively. The current annual increment (CAI) of stemwood fluctuated, peaking at 10 Mg ha–1 yr–1 at the age of 15 years; the mean annual increment (MAI) fluctuated at around 4–5 Mg ha–1. The annual leaf mass of the stand stabilised at around 3 Mg ha–1 yr–1. The stand density decreased from 11600 to 2700 trees ha–1 in the 8- and 17-year-old stand, respectively. The largest fluxes in N budget were net nitrogen mineralization and gaseous N2-N emission. The estimated fluxes of N2O and N2 were 0.12 and 83 kg ha–1 yr–1, respectively; N leaching was negligible. Nitrogen retranslocation from senescing leaves was approximately 45 kg ha–1, N was mainly retranslocated into stembark. The N content in the upper 0–10 cm soil layer increased significantly (145 kg ha–1) from 2004 to 2014; soil C content remained stable. Both the woody biomass dynamics and the N cycling of the stand witness the potential for bioenergetics of such ecosystems.

  • Aosaar, Estonian University of Life Sciences, Institute of Forestry and Rural Engineering, Kreutzwaldi 1, 51014 Tartu, Estonia E-mail: jyrgen.aosaar@emu.ee (email)
  • Mander, University of Tartu, Institute of Ecology and Earth Sciences, Ülikooli 18, 50090 Tartu, Estonia E-mail: ulo.mander@ut.ee
  • Varik, Estonian University of Life Sciences, Institute of Forestry and Rural Engineering, Kreutzwaldi 1, 51014 Tartu, Estonia E-mail: mats.varik@emu.ee
  • Becker, Estonian University of Life Sciences, Institute of Forestry and Rural Engineering, Kreutzwaldi 1, 51014 Tartu, Estonia E-mail: hardo.becker@emu.ee
  • Morozov, Estonian University of Life Sciences, Institute of Forestry and Rural Engineering, Kreutzwaldi 1, 51014 Tartu, Estonia E-mail: gunnar.morozov@emu.ee
  • Maddison, University of Tartu, Institute of Ecology and Earth Sciences, Ülikooli 18, 50090 Tartu, Estonia E-mail: martin.maddison@ut.ee
  • Uri, Estonian University of Life Sciences, Institute of Forestry and Rural Engineering, Kreutzwaldi 1, 51014 Tartu, Estonia E-mail: veiko.uri@emu.ee
article id 1622, category Research article
Lingbo Dong, Pete Bettinger, Zhaogang Liu, Huiyan Qin, Yinghui Zhao. (2016). Evaluating the neighborhood, hybrid and reversion search techniques of a simulated annealing algorithm in solving forest spatial harvest scheduling problems. Silva Fennica vol. 50 no. 4 article id 1622. https://doi.org/10.14214/sf.1622
Keywords: spatial harvest scheduling; metaheuristics; combinatorial optimization; neighborhood search; reversion search
Highlights: The performances of neighborhood, hybrid and reversion search strategies of simulated annealing were evaluated when implemented with a forest spatial harvest scheduling problem; The performances of alternative search strategies of simulated annealing were all systematic and clear better than the conventional strategy; The reversion techniques were significant superior to the other search strategies in solving forest spatial harvest scheduling problems.
Abstract | Full text in HTML | Full text in PDF | Author Info

Heuristic techniques have been increasingly used to address the complex forest planning problems over the last few decades. However, heuristics only can provide acceptable solutions to difficult problems, rather than guarantee that the optimal solution will be located. The strategies of neighborhood, hybrid and reversion search processes have been proved to be effective in improving the quality of heuristic results, as suggested recently in the literature. The overall aims of this paper were therefore to systematically evaluate the performances of these enhanced techniques when implemented with a simulated annealing algorithm. Five enhanced techniques were developed using different strategies for generating candidate solutions. These were then compared to the conventional search strategy that employed 1-opt moves (Strategy 1) alone. The five search strategies are classified into three categories: i) neighborhood search techniques that only used the change version of 2-opt moves (Strategy 2); ii) self-hybrid search techniques that oscillate between 1-opt moves and the change version of 2-opt moves (Strategy 3), or the exchange version of 2-opt moves (Strategy 4); iii) reversion search techniques that utilize 1-opt moves and the change version of 2-opt moves (Strategy 5) or the exchange version of 2-opt moves (Strategy 6). We found that the performances of all the enhanced search techniques of simulated annealing were systematic and often clear better than conventional search strategy, however the required computational time was significantly increased. For a minimization planning problem, Strategy 6 produced the lowest mean objective function values, which were less than 1% of the means developed using conventional search strategy. Although Strategy 6 performed very well, the other search strategies should not be neglected because they also have the potential to produce high-quality solutions.

  • Dong, Department of Forest Management, College of Forestry, Northeast Forestry University, Harbin 150040, China E-mail: farrell0503@126.com
  • Bettinger, Warnell School of Forestry and Natural Resources, University of Georgia, Athens 30602, GA, USA E-mail: pbettinger@warnell.uga.edu
  • Liu, Department of Forest Management, College of Forestry, Northeast Forestry University, Harbin 150040, China E-mail: lzg19700602@163.com (email)
  • Qin, Department of Forestry Economic, College of Economic & Management, Northeast Forestry University, Harbin 150040, China E-mail: huiyanqin@hotmail.com
  • Zhao, Department of Forest Management, College of Forestry, Northeast Forestry University, Harbin 150040, China E-mail: zyinghui0925@126.com
article id 1611, category Research article
Ilpo Ervasti. (2016). Wood fiber contents of different materials in the paper industry material chain expressed in roundwood equivalents (RWEs). Silva Fennica vol. 50 no. 4 article id 1611. https://doi.org/10.14214/sf.1611
Keywords: pulpwood; paper production; raw materials; roundwood equivalent (RWE); wood pulp; recycled fiber; recovered paper; material recycling
Highlights: The paper industry material recycling chain consists of different material streams; Consumed paper products form a huge fiber source for industry. However, a reliable measuring system should be developed to quantify these fiber volumes; Converting factors are introduced to quantify the wood fiber contents of different paper industry-related materials of the chain, namely, wood pulp, paper and recovered paper; By using these conversion factors it is possible to convert for example global recovered paper utilization volumes into wood fiber volumes expressed in roundwood equivalents (RWEs).
Abstract | Full text in HTML | Full text in PDF | Author Info

At present, there are no means for reliably comparing the wood fiber contents of different material streams within the paper industry material chain with each other. The aim of this article is to introduce conversion factors that make it possible to quantify the volume of wood expressed in roundwood equivalent (RWE) values for different paper industry-related materials in the material chain. These conversion factors apply to wood pulp, paper, and recovered paper. European data are used in quantifying the paper industry material streams and calculating the RWE conversion factors. The introduced conversion factors can be used to estimate RWE volumes at a global scale. With assumption that paper recycling did not occur and that paper production volume remained unchanged, an additional volume of 666 million m3 RWEs would be required globally per annum to produce 167 million tons of virgin wood pulp to replace 222 million tons of recovered paper utilized by the paper industry in 2010. This volume is approximately the same as 1.6 times the total removal of wood in Europe (EU27), or the total annual removal of wood in the USA, Canada, and Brazil combined.

  • Ervasti, Aalto University, Industrial Engineering and Management, Maarintie 8, 02150 Espoo, Finland E-mail: ilervasti@gmail.com (email)
article id 1588, category Research article
Kouakou Laurent Kouakou, Jonas Patrick Dao, Kouadio Ignace Kouassi, Manehonon Martine Beugré , Mongomaké Koné, Jean-Pierre Baudoin, Irié Arsene Zoro Bi. (2016). Propagation of Garcinia kola (Heckel) by stem and root cuttings. Silva Fennica vol. 50 no. 4 article id 1588. https://doi.org/10.14214/sf.1588
Keywords: coppicing; vegetative propagation; bitter kola; non-mist polypropagators
Highlights: Roots and branches cuttings from mature forest trees are difficult to sprout; The highest mean numbers of roots and buds produced were obtained with softwood cuttings; The aqueous IBA treatment was more effective than the powder in promoting rooting and root development; Non-mist poly-propagator gave the best propagation results; Seedling stockplants cut above node 1 promoted most vigorous shoots production.
Abstract | Full text in HTML | Full text in PDF | Author Info

The availability of appropriate propagation techniques is a major constraint to the domestication of the forest trees widely used by rural communities; such as Garcinia kola (Heckel). This study tested the ability of root and stem cuttings to regenerate vegetatively when treated with indole-3-butyric acid (IBA), and set in non-mist poly-propagator within a shaded nursery. It found that G. kola is amenable to propagation by softwood stem cuttings. Attention was given to the effect of cutting age (softwood, semi hardwood) and IBA application with regard to the sprouting and rooting efficiency. Bud and leaf emergence time were also investigated, as was the coppicing ability of the stump. Results revealed that roots and branches from mature forest trees did not sprout under any culture conditions. The highest percentages of rooting (70–85%) were obtained with softwood cuttings set in non-mist poly-propagator, regardless of hormonal treatment. The mean numbers of buds (2.9 ± 0.4) and roots (2.6 ± 0.1) produced by softwood cuttings was significantly greater than those obtained in the Control. The best average emergence time of buds (25.1 days ± 9.3) and leaves (36.8days ± 8.4) was obtained with cuttings treated with IBA and set in non-mist poly-propagator against, 54.4 ± 12.5 and 72.6 ± 3.4 days respectively for the Control. In general, non-mist poly-propagator gave the best propagation results. When coppiced, the shoots emerging from stumps with one node were the most vigorous.

  • Kouakou, Université Nangui Abrogoua, UFR/SN, Laboratoire de Génomique Fonctionnelle et Amélioration génétique, 02 BP 801 Abidjan, Côte d’Ivoire; Université Nangui Abrogoua, UFR Sciences de la Nature, Laboratoire de Biologie et Amélioration des Productions Végétales, 02 BP 801 Abidjan 02, Côte d’Ivoire E-mail: kk_laurent@yahoo.fr (email)
  • Dao, Université Nangui Abrogoua, UFR/SN, Laboratoire de Génomique Fonctionnelle et Amélioration génétique, 02 BP 801 Abidjan, Côte d’Ivoire E-mail: daojonas@hotmail.fr
  • Kouassi, Université Nangui Abrogoua, UFR/SN, Laboratoire de Génomique Fonctionnelle et Amélioration génétique, 02 BP 801 Abidjan, Côte d’Ivoire E-mail: kouadioignace@yahoo.fr
  • Beugré , Université Nangui Abrogoua, UFR Sciences de la Nature, Laboratoire de Biologie et Amélioration des Productions Végétales, 02 BP 801 Abidjan 02, Côte d’Ivoire E-mail: beugremartine@yahoo.fr
  • Koné,  Université Nangui Abrogoua, UFR Sciences de la Nature, Laboratoire de Biologie et Amélioration des Productions Végétales, 02 BP 801 Abidjan 02, Côte d’Ivoire E-mail: babadaoudi@gmail.com
  • Baudoin, Université de Liège, Gembloux Agro-Bio Tech, Laboratoire Agroécologie tropicale et Horticulture, Passage des Déportés, 2 B 5030 Gembloux, Belgique E-mail: jean-pierre.baudoin@ulg.ac.be
  • Zoro Bi, Université Nangui Abrogoua, UFR/SN, Laboratoire de Génomique Fonctionnelle et Amélioration génétique, 02 BP 801 Abidjan, Côte d’Ivoire E-mail: banhiakalou@yahoo.fr
article id 1567, category Research article
Eetu Kotivuori, Lauri Korhonen, Petteri Packalen. (2016). Nationwide airborne laser scanning based models for volume, biomass and dominant height in Finland. Silva Fennica vol. 50 no. 4 article id 1567. https://doi.org/10.14214/sf.1567
Keywords: forest inventory; LIDAR; regression analysis; remote sensing; calibration; area-based approach; mixed-effect models
Highlights: Pooled data from nine inventory projects in Finland were used to create nationwide laser-based regression models for dominant height, volume and biomass; Volume and biomass models provided regionally different means than real means, but for dominant height the mean difference was small; The accuracy of general volume predictions was nevertheless comparable to relascope-based field inventory by compartments.
Abstract | Full text in HTML | Full text in PDF | Author Info

The aim of this study was to examine how well stem volume, above-ground biomass and dominant height can be predicted using nationwide airborne laser scanning (ALS) based regression models. The study material consisted of nine practical ALS inventory projects taken from different parts of Finland. We used field sample plots and airborne laser scanning data to create nationwide and regional models for each response variable. The final models had one or two ALS predictors, which were chosen based on the root mean square error (RMSE), and cross-validated. Finally, we tested how much predictions would improve if the nationwide models were calibrated with a small number of regional sample plots. Although forest structures differ among different parts of Finland, the nationwide volume and biomass models performed quite well (leave-inventory-area-out RMSE 22.3% to 33.8%, mean difference [MD] –13.8% to 18.7%) compared with regional models (leave-plot-out RMSE 20.2% to 26.8%). However, the nationwide dominant height model (RMSE 5.4% to 7.7%, MD –2.0% to 2.8%, with the exception of the Tornio region – RMSE 11.4%, MD –9.1%) performed nearly as well as the regional models (RMSE 5.2% to 6.7%). The results show that the nationwide volume and biomass models provided different means than real means at regional level, because forest structure and ALS device have a considerable effect on the predictions. Large MDs appeared especially in northern Finland. Local calibration decreased the MD and RMSE of volume and biomass models. However, the nationwide dominant height model did not benefit much from calibration.

  • Kotivuori, University of Eastern Finland, School of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: eetu.kotivuori@uef.fi (email)
  • Korhonen, University of Eastern Finland, School of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: lauri.korhonen@uef.fi
  • Packalen, University of Eastern Finland, School of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: petteri.packalen@uef.fi
article id 1564, category Research article
Stanislav Vacek, Zdeněk Vacek, Lukáš Bílek, Jaroslav Simon, Jiří Remeš, Iva Hůnová, Jan Král, Tereza Putalová, Miroslav Mikeska. (2016). Structure, regeneration and growth of Scots pine (Pinus sylvestris L.) stands with respect to changing climate and environmental pollution. Silva Fennica vol. 50 no. 4 article id 1564. https://doi.org/10.14214/sf.1564
Keywords: Pinus sylvestris; natural regeneration; climate; stand development; production; air-pollution
Highlights: Pine forest stands showed positive development of stand structural characteristics related to their diversity, number of regeneration individuals and growth characteristics; Tree-ring width was positively correlated with precipitation, while it was negatively correlated with temperature in growing seasons; Mean NOx concentrations showed positive effect on radial growth of pine; Serious defoliation was caused by SO2 concentrations and N deposition in combination with extreme climate events.
Abstract | Full text in HTML | Full text in PDF | Author Info

Changes in the structure and development of managed Scots pine (Pinus sylvestris L.) stands with respect to changing environmental conditions were set for the period 1979–2015. The study was conducted in conditions of natural pinewoods and pine-oak sites on five permanent research plots (0.25 ha) in Eastern Bohemia, Czech Republic (CR). Studied forest stands showed positive development of stand structural characteristics related to their diversity, number of regeneration individuals and growth characteristics. The standing volume of regularly distributed tree layer in 2015 was in the range of 320–434 m3 ha–1, which indicates an increase by 5.9–20.0% over 10 years. Correlation between pine radial increment and the amount of precipitation was generally the strongest one. Positive statistically significant correlation between diameter increment and temperature was demonstrated only for the average March temperature of the current year. Within the CR, study site can be characterised as a medium polluted area both for sulphur and nitrogen, despite this SO2 concentrations and N deposition in combination with extreme climate events caused severe defoliation in pine stands. Conversely, radial growth was positively significantly correlated with mean NOx concentrations. Drought mainly in combination with even medium environmental pollution can further worsen the health status of pine stands in lowland areas of Central Europe. Thus, formulation of silvicultural techniques able to mitigate the impact of these stress factors is needed.

  • Vacek, Czech University of Life Sciences Prague, Faculty of Forestry and Wood Sciences, Kamýcká 129, 165 21 Prague, Czech Republic E-mail: vacekstanislav@fld.czu.cz
  • Vacek, Czech University of Life Sciences Prague, Faculty of Forestry and Wood Sciences, Kamýcká 129, 165 21 Prague, Czech Republic E-mail: vacekz@fld.czu.cz
  • Bílek, Czech University of Life Sciences Prague, Faculty of Forestry and Wood Sciences, Kamýcká 129, 165 21 Prague, Czech Republic E-mail: bilek@fld.czu.cz
  • Simon, Mendel University in Brno, Faculty of Forestry and Wood Technology, Zemědělská 3, 613 00 Brno, Czech Republic E-mail: jaroslav.simon@mendelu.cz
  • Remeš, Czech University of Life Sciences Prague, Faculty of Forestry and Wood Sciences, Kamýcká 129, 165 21 Prague, Czech Republic E-mail: remesj@email.cz (email)
  • Hůnová, Czech Hydrometeorological Institute, Na Šabatce 17 143 06 Prague, Czech Republic E-mail: hunova@chmi.cz
  • Král, Czech University of Life Sciences Prague, Faculty of Forestry and Wood Sciences, Kamýcká 129, 165 21 Prague, Czech Republic E-mail: kraljan@fld.czu.cz
  • Putalová, Czech University of Life Sciences Prague, Faculty of Forestry and Wood Sciences, Kamýcká 129, 165 21 Prague, Czech Republic E-mail: putalova@fld.czu.cz
  • Mikeska, University of Hradec Králové, Faculty of Science, Rokitanského 62, 500 03 Hradec Králové, Czech Republic E-mail: Mikeska.Miroslav@uhul.cz
article id 1559, category Research article
Karol Bronisz, Mike Strub, Chris Cieszewski, Szymon Bijak, Agnieszka Bronisz, Robert Tomusiak, Rafał Wojtan, Michał Zasada. (2016). Empirical equations for estimating aboveground biomass of Betula pendula growing on former farmland in central Poland. Silva Fennica vol. 50 no. 4 article id 1559. https://doi.org/10.14214/sf.1559
Keywords: silver birch; simplified and expanded models; seemingly unrelated regression
Highlights: We developed equations for aboveground biomass components of young silver birch stands on post-agricultural lands in central Poland for single tree level; Simplified equations were based exclusively on diameter at ground level or breast height, while expanded ones were based on the appropriate diameter and tree height; For large trees, diameter at breast height is a more appropriate explanatory variable than diameter at ground level; Biomass estimations based on models from neighboring countries were consistent with our results.
Abstract | Full text in HTML | Full text in PDF | Author Info

We determined empirical models for estimating total aboveground as well as stem, branches, and foliage dry biomass of young (age up to 16 years) silver birch (Betula pendula Roth.) growing on the post-agricultural lands. Two sets of allometric models for trees with a height below or above 1.3 m (small and large trees respectively) were developed. Simplified models were elaborated based exclusively on appropriate tree diameter (diameter at ground level for small trees, diameter at breast height for large trees), while expanded models also included tree height. Total aboveground biomass was estimated as the sum of biomass of all tree components. To assure additivity of the developed equations, the seemingly unrelated regression approach for the final model fitting was used. Expanded models in both tree groups were characterized by a better fit to the data (R2 for total aboveground biomass for small and large trees equaled 0.8768 and 0.9752, respectively). Diameter at breast height appeared to be a better predictor than diameter at ground level – simplified models had better fit for large trees (R2 for total aboveground biomass equals 0.9611) than for small ones (R2 = 0.7516). The developed equations provide biomass predictions consistent with available Latvian, Estonian, Finnish, Swedish, and Norwegian models for silver birch.

  • Bronisz, Laboratory of Dendrometry and Forest Productivity, Faculty of Forestry, Warsaw University of Life Sciences – SGGW, Nowoursynowska 159, 02-787 Warsaw, Poland E-mail: karol.bronisz@wl.sggw.pl (email)
  • Strub, Warnell School of Forestry and Natural Resources, University of Georgia, Athens, GA, 30605, USA E-mail: strub@mcfns.com
  • Cieszewski, Warnell School of Forestry and Natural Resources, University of Georgia, Athens, GA, 30605, USA E-mail: thebiomat@gmail.com
  • Bijak, Laboratory of Dendrometry and Forest Productivity, Faculty of Forestry, Warsaw University of Life Sciences – SGGW, Nowoursynowska 159, 02-787 Warsaw, Poland E-mail: szymon.bijak@wl.sggw.pl
  • Bronisz, Laboratory of Dendrometry and Forest Productivity, Faculty of Forestry, Warsaw University of Life Sciences – SGGW, Nowoursynowska 159, 02-787 Warsaw, Poland E-mail: agnieszka.bronisz@wl.sggw.pl
  • Tomusiak, Laboratory of Dendrometry and Forest Productivity, Faculty of Forestry, Warsaw University of Life Sciences – SGGW, Nowoursynowska 159, 02-787 Warsaw, Poland E-mail: robert.tomusiak@wl.sggw.pl
  • Wojtan, Laboratory of Dendrometry and Forest Productivity, Faculty of Forestry, Warsaw University of Life Sciences – SGGW, Nowoursynowska 159, 02-787 Warsaw, Poland E-mail: rafal.wojtan@wl.sggw.pl
  • Zasada, Laboratory of Dendrometry and Forest Productivity, Faculty of Forestry, Warsaw University of Life Sciences – SGGW, Nowoursynowska 159, 02-787 Warsaw, Poland E-mail: michal.zasada@wl.sggw.pl
article id 1568, category Research article
Jouni Siipilehto, Harri Lindeman, Mikko Vastaranta, Xiaowei Yu, Jori Uusitalo. (2016). Reliability of the predicted stand structure for clear-cut stands using optional methods: airborne laser scanning-based methods, smartphone-based forest inventory application Trestima and pre-harvest measurement tool EMO. Silva Fennica vol. 50 no. 3 article id 1568. https://doi.org/10.14214/sf.1568
Keywords: forest inventory; diameter distribution; Weibull; area-based approach; parameter recovery; k-NN estimation
Highlights: An airborne laser scanning grid-based approach for determining stand structure enabled bi- or multimodal predicted distributions that fitted well to the ground-truth harvester data; EMO and Trestima applications needed stand-specific inventory for sample measurements or sample photos, respectively, and at their best, provided superior accuracy for predicting certain stand characteristics.
Abstract | Full text in HTML | Full text in PDF | Author Info

Accurate timber assortment information is required before cuttings to optimize wood allocation and logging activities. Timber assortments can be derived from diameter-height distribution that is most often predicted from the stand characteristics provided by forest inventory. The aim of this study was to assess and compare the accuracy of three different pre-harvest inventory methods in predicting the structure of mainly Scots pine-dominated, clear-cut stands. The investigated methods were an area-based approach (ABA) based on airborne laser scanning data, the smartphone-based forest inventory Trestima app and the more conventional pre-harvest inventory method called EMO. The estimates of diameter-height distributions based on each method were compared to accurate tree taper data measured and registered by the harvester’s measurement systems during the final cut. According to our results, grid-level ABA and Trestima were generally the most accurate methods for predicting diameter-height distribution. ABA provides predictions for systematic 16 m × 16 m grids from which stand-wise characteristics are aggregated. In order to enable multimodal stand-wise distributions, distributions must be predicted for each grid cell and then aggregated for the stand level, instead of predicting a distribution from the aggregated stand-level characteristics. Trestima required a sufficient sample for reliable results. EMO provided accurate results for the dominating Scots pine but, it could not capture minor admixtures. ABA seemed rather trustworthy in predicting stand characteristics and diameter distribution of standing trees prior to harvesting. Therefore, if up-to-date ABA information is available, only limited benefits can be obtained from stand-specific inventory using Trestima or EMO in mature pine or spruce-dominated forests.

  • Siipilehto, Natural Research Institute Finland (Luke), Management and Production of Renewable Resources, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: jouni.siipilehto@luke.fi (email)
  • Lindeman,  Natural Research Institute Finland, Green Technology, Kaironiementie 15, 39700 Parkano E-mail: harri.lindeman@luke.fi
  • Vastaranta, University of Helsinki, Department of Forest Sciences, P.O. Box 62 (Viikinkaari 11), FI-00014 University of Helsinki E-mail: mikko.vastaranta@helsinki.fi
  • Yu, Finnish Geospatial Research Institute (FGI), Department of Remote Sensing and Photogrammetry, National Land Survey of Finland, P.O. Box 15 (Geodeetinrinne 2), FI-02431, Masala, Finland E-mail: xiaowei.yu@maanmittauslaitos.fi
  • Uusitalo,  Natural Research Institute Finland, Green Technology, Kaironiementie 15, 39700 Parkano E-mail: jori.uusitalo@luke.fi
article id 1565, category Research article
Teija Ruuhola, Ari Nikula, Nivala Vesa, Seppo Nevalainen, Juho Matala. (2016). Effects of bedrock and surficial deposit composition on moose damage in young forest stands in Finnish Lapland. Silva Fennica vol. 50 no. 3 article id 1565. https://doi.org/10.14214/sf.1565
Keywords: Pinus sylvestris; plantation; Alces alces; soil; damage risk; topography; geochemistry
Highlights: The effect of bedrock and soil on moose damage in forest plantations were examined; Moose damage were concentrated in nutrient rich bedrock areas; Bedrock of damaged stands contained a higher proportion of mafic and alkaline rocks; Pine-dominated stands on fine grained fertile forest sites had the highest damage risk.
Abstract | Full text in HTML | Full text in PDF | Author Info

There is evidence that moose are attracted to fertile growth habitats apparently due to better quality and larger quantities of food. The nutrients in mineral soils originate from the weathering of bedrock and the composition of parental bedrock affects the fertility of produced mineral soil, thus affecting also the import of nutrients into the whole food web. We surveyed the connection between moose damage in forest plantations and the composition of bedrock and surficial deposits in Finnish Lapland. We used a database of compensated moose damage in private forests in years 1997−2010. Undamaged stands in National Forest Inventories (NFI) from years 1986–2008 served as a control data and moose-damaged NFI-stands as a reference data. Bedrock and surficial depositions and the location of studied stands in relation to ancient shorelines were explored by using the digital databases of the Geological Survey of Finland. Moose-damaged stands were concentrated in southwestern and east Lapland in the areas of the Peräpohja Schist Belt and Lapland’s Greenstone Belt that are both composed of nutrient-rich rocks. The bedrock of damaged stands contained a higher proportion of mafic and alkaline rocks than did the control stands. Moose-damaged stands were pine-dominated and grew in more fertile forest sites than did control stands. Part of pine stands probably located in soils formerly occupied by spruce, which may increase the stands’ vulnerability to biotic threats. Especially, there were relatively more moose damage in pine plantations regenerated on fine-grained mineral soils derived from nutrient rich rocks than in less fertile soils.

  • Ruuhola, Natural Resources Institute Finland (Luke), Natural Resources and Bioproduction, Yliopistokatu 6, FI-80101 Joensuu, Finland; University of Eastern Finland, Faculty of Science and Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: teija.ruuhola@uef.fi
  • Nikula, Natural Resources Institute Finland (Luke), Economics and Society, Eteläranta 55, FI-96300 Rovaniemi, Finland E-mail: ari.nikula@luke.fi (email)
  • Vesa, Natural Resources Institute Finland (Luke), Economics and Society, Eteläranta 55, FI-96300 Rovaniemi, Finland E-mail: vesa.nivala@luke.fi
  • Nevalainen, Natural Resources Institute Finland (Luke), Natural Resources and Bioproduction, Yliopistokatu 6, FI-80101 Joensuu, Finland E-mail: seppo.nevalainen@luke.fi
  • Matala, Natural Resources Institute Finland (Luke), Natural Resources and Bioproduction, Yliopistokatu 6, FI-80101 Joensuu, Finland E-mail: juho.matala@luke.fi
article id 1562, category Research article
Mats Erik Berlin, Torgny Persson, Gunnar Jansson, Matti Haapanen, Seppo Ruotsalainen, Lars Bärring, Bengt Andersson Gull. (2016). Scots pine transfer effect models for growth and survival in Sweden and Finland. Silva Fennica vol. 50 no. 3 article id 1562. https://doi.org/10.14214/sf.1562
Keywords: Pinus sylvestris; adaptation; tree breeding; reaction patterns; forest regeneration material
Highlights: Scots pine transfer effect models for growth and survival, valid in both Sweden and Finland have been developed; The models use high-resolution gridded climate data and can predict performance in future climatic conditions; The models perform well both for unimproved and genetically improved material and can be used to develop deployment recommendations of contemporary forest regeneration material in Sweden and Finland.
Abstract | Full text in HTML | Full text in PDF | Author Info

In this study, we developed models of transfer effects for growth and survival of Scots pine (Pinus sylvestris L.) in Sweden and Finland using a general linear mixed-model approach. For model development, we used 378 provenance and progeny trials with a total of 276 unimproved genetic entries (provenances and stand seed check-lots) distributed over a wide variety of climatic conditions in both countries. In addition, we used 119 progeny trials with 3921 selected genetic entries (open- and control pollinated plus-tree families) for testing model performance. As explanatory variables, both climatic indices derived from high-resolution gridded climate datasets and geographical variables were used. For transfer, latitude (photoperiod) and, for describing the site, temperature sum were found to be main drivers for both survival and growth. In addition, interaction terms (between transfer in latitude and site altitude for survival, and transfer in latitude and temperature sum for growth) entail changed reaction patterns of the models depending on climatic conditions of the growing site. The new models behave in a way that corresponds well to previous studies and recommendations for both countries. The model performance was tested using selected plus-trees from open and control pollinated progeny tests. Results imply that the models are valid for both countries and perform well also for genetically improved material. These models are the first step in developing common deployment recommendations for genetically improved forest regeneration material in both Sweden and Finland.

  • Berlin, Uppsala Science Park, SE-75183 Uppsala, Sweden E-mail: mats.berlin@skogforsk.se (email)
  • Persson, Skogforsk, Box 3, SE-91821 Sävar, Sweden E-mail: torgny.persson@skogforsk.se
  • Jansson, Uppsala Science Park, SE-75183 Uppsala, Sweden E-mail: gunnar.jansson@skogforsk.se
  • Haapanen, Natural Resources Institute Finland (Luke), Green Technology, Box 18, FI-01301 Vantaa, Finland E-mail: matti.haapanen@luke.fi
  • Ruotsalainen, Natural Resources Institute Finland (Luke), Green Technology, Finlandiantie 18, FI-58450 Punkaharju, Finland E-mail: seppo.ruotsalainen@luke.fi
  • Bärring, Rossby Centre, Swedish Meteorological and Hydrological Institute, Folkborgsvägen 17, SE-60176 Norrköping, Sweden E-mail: lars.barring@smhi.se
  • Andersson Gull, Skogforsk, Box 3, SE-91821 Sävar, Sweden E-mail: bengt.andersson@skogforsk.se
article id 1560, category Research article
Marina Gurskaya, Pavel Moiseev, Martin Wilmking. (2016). Does slope exposure affect frost ring formation in Picea obovata growing at treeline in the Southern Urals? Silva Fennica vol. 50 no. 3 article id 1560. https://doi.org/10.14214/sf.1560
Keywords: tree line; topography; frost injury; Siberian spruce
Highlights: Frost ring formation was ubiquitous from continuous forest cover to treeline, but, surprisingly, was not affected by slope exposure; Late frosts in spring were the main cause for frost ring formation; While mainly young trees (< 30 years) recorded frost events, at the climatically harshest site (highest elevation, northeastern exposure), frost events were recorded also in trees older than 70 years.
Abstract | Full text in HTML | Full text in PDF | Author Info

Topographic complexity in mountainous ecosystems strongly influences plant growth and as such also wood formation. This wood formation can possibly be used to understand topographic variation of the main climatic drivers, e.g. by modulating frost events. Here we test the influence of different slope exposures on the spatio-temporal distribution of frost rings in Siberian spruce (Picea obovata Ledeb.) in the Southern Urals, Russia. We sampled on two opposite slopes, northeast (NE) and southwest (SW), on three elevation levels from the highest single trees to closed canopy forest and analysed frost ring occurrence and their seasonal timing. Frost ring formation at all exposure-elevation combinations was common and mainly concentrated in the early part of the growing season. The age until trees record frost rings was equally similar (until about 35 years) on both slopes and different elevational levels with the exception of the climatically harshest site, the highest elevation on the NE slope. While we could not deduce a direct, easily identifiable climatic driver for the formation of frost rings, our analysis shows high potential to disentangle the complex interplay between climate, site condition and tree growth in mountainous ecosystems.

  • Gurskaya, Institute of Plant and Animal Ecology (IPAE), Ural Branch of Russian Academy of Sciences , 8 Marta St. 202, 620144 Ekaterinburg, Russia E-mail: mgurskaya@yandex.ru (email)
  • Moiseev, Institute of Plant and Animal Ecology (IPAE), Ural Branch of Russian Academy of Sciences , 8 Marta St. 202, 620144 Ekaterinburg, Russia E-mail: moiseev@ipae.uran.ru
  • Wilmking, Institute of Botany and Landscape Ecology, Soldmanstrasse 15, Ernst-Moritz-Arndt-University Greifswald, 17487 Greifswald, Germany E-mail: wilmking@uni-greifswald.de
article id 1546, category Research article
Jussi Manner, Lauri Palmroth, Tomas Nordfjell, Ola Lindroos. (2016). Load level forwarding work element analysis based on automatic follow-up data. Silva Fennica vol. 50 no. 3 article id 1546. https://doi.org/10.14214/sf.1546
Keywords: harvesting; cut-to-length logging; haulage; data gathering; automatic recording; classification algorithm; Hidden Markov Models
Highlights: Recent developments in on-board technology enables automatic collection of follow-up data on forwarder work; Time consumption per load was more strongly associated with Loading drive distance than with extraction distance, indicating that the relevance of extraction distance as a main indicator of forwarding productivity should be re-considered; Data, within variables, were positively skewed with a few exceptions with normal distributions.
Abstract | Full text in HTML | Full text in PDF | Author Info

Recent developments in on-board technology have enabled automatic collection of follow-up data on forwarder work. The objective of this study was to exploit this possibility to obtain highly representative information on time consumption of specific work elements (including overlapping crane work and driving), with one load as unit of observation, for large forwarders in final felling operations. The data used were collected by the John Deere TimberLink system as nine operators forwarded 8868 loads, in total, at sites in mid-Sweden. Load-sizes were not available. For the average and median extraction distances (219 and 174 m, respectively), Loading, Unloading, Driving empty, Driving loaded and Other time effective work (PM) accounted for ca. 45, 19, 8.5, 7.5 and 14% of total forwarding time consumption, respectively. The average and median total time consumptions were 45.8 and 42.1 minutes/load, respectively. The developed models explained large proportions of the variation of time consumption for the work elements Driving empty and Driving loaded, but minor proportions for the work elements Loading and Unloading. Based on the means, the crane was used during 74.8% of Loading PM time, the driving speed was nonzero during 31.9% of the Loading PM time, and Simultaneous crane work and driving occurred during 6.7% of the Loading PM time. Time consumption per load was more strongly associated with Loading drive distance than with extraction distance, indicating that the relevance of extraction distance as a main indicator of forwarding productivity should be re-considered.

  • Manner, The Forestry Research Institute of Sweden (Skogforsk), Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: jussi.manner@skogforsk.se (email)
  • Palmroth, John Deere Forestry, P.O. Box 472, FI-33101 Tampere, Finland E-mail: PalmrothLauri@JohnDeere.com
  • Nordfjell, Swedish University of Agricultural Sciences, Department of Forest Biomaterials and Technology, SE-901 83 Umeå, Sweden E-mail: tomas.nordfjell@slu.se
  • Lindroos, Swedish University of Agricultural Sciences, Department of Forest Biomaterials and Technology, SE-901 83 Umeå, Sweden E-mail: ola.lindroos@slu.se
article id 1516, category Research article
Hamed Yousefzadeh, Abasalt Hosseinzadeh Colagar, Fatemeh Fallah. (2016). Genetic diversity of geographically isolated Iranian populations of Betula pendula Roth: implications for conservation. Silva Fennica vol. 50 no. 3 article id 1516. https://doi.org/10.14214/sf.1516
Keywords: genetic differentiation; habitat isolation; haplotype diversity; genetic drift; long-term isolation
Highlights: The Iranian populations of birches exhibited high levels of genetic diversity, population differentiation, and the presence of unique haplotypes; The high genetic differentiation amongst the populations may contribute to the local geographical structure and poor gene flow amongst individuals; The results can potentially be used to adopt appropriate strategies for the conservation and management of isolated tree populations.
Abstract | Full text in HTML | Full text in PDF | Author Info

The effects of long-term habitat fragmentations on genetic and population differentiation of Betula pendula Roth were investigated using chloroplast DNA (cpDNA) variations. Leaf samples were collected from four small remnant populations across the north of Iran. Three pairs of universal primers were used to amplify cpDNA, large single copy regions of trnC-trnD, trnK1-trnK2 and trnD-trnT. A total of 18 of the cpDNA haplotypes in the four populations were identified, however, no clear phylogeographic structuring of haplotypes could be detected. The total genetic diversity (HT) for all populations was high (0.932). Average intra-population genetic diversity was estimated as HS = 0.729 and average differentiation of populations GST = 0.218. Mantel tests of isolation by distance revealed a significant relationship between Wright’s inbreeding coefficient (Fst) and geographical distances for the four populations in Iran (r = 0.77, p < 0.05). The results of the hierarchical analysis of molecular variance (AMOVA) indicated that a 66% variation was partitioned within populations, whilst the variance amongst the four populations was only 34%. We suggest that significant genetic differentiation amongst populations can likely be attributed to reduced gene flow as a result of habitat fragmentation.

  • Yousefzadeh, Department of Forestry, Faculty of Natural Resources, Tarbiat Modares University, Nour, Mazandaran, Iran E-mail: h.yousefzadeh@modares.ac.ir (email)
  • Hosseinzadeh Colagar, Department of Molecular and Cell Biology; Faculty of Basic Sciences, University of Mazandaran, 47416-95447 Babolsar, Iran E-mail: ahcolagar@umz.ac.ir
  • Fallah, Department of Molecular and Cell Biology; Faculty of Basic Sciences, University of Mazandaran, 47416-95447 Babolsar, Iran E-mail: fatemehfalah69@yahoo.com
article id 1514, category Research article
Heidi Hallongren, Ville Kankaanhuhta, Mikael Kukkonen. (2016). Cleaning Scots pine seedling stands with mechanical uprooters – a work quality comparison of two related devices. Silva Fennica vol. 50 no. 3 article id 1514. https://doi.org/10.14214/sf.1514
Keywords: Pinus sylvestris; productivity; early cleaning; mechanized silviculture
Highlights: The productivity of the narrower modified device was significantly better than the wider original device; Work quality did not differ significantly between devices when stand characteristics, regeneration success and pre-existing damage were taken into account; Results indicate that mechanical uprooting devices may be further developed to a cost-effective alternative to motor-manual techniques for the early cleaning of direct seeded commercial Scots pine stands.
Abstract | Full text in HTML | Full text in PDF | Author Info

Commercial forests require early cleaning to ensure the unhindered and uniform growth of crop trees. In order to be cost effective, non-crop vegetation should be uprooted to prevent their recovery. Performing this work manually is a labour-intensive task but it can be done mechanically. We evaluated the efficiency of two uprooting devices in direct seeded Scots pine (Pinus sylvestris L.) stands ca. 1 m tall. Productivity and quality of the uprooting work was investigated across eight stands and ca. 160 sample plots in northern Karelia, eastern Finland. Time consumption of the uprooters was analyzed through a linear regression model and the work quality through a multilevel multivariate model in terms of the number of individual Scots pine seedlings, processing units (i.e., a bunch of seedlings to be harvested in the future) and broadleaves. The productivity of the narrower modified device was significantly better in terms of time consumption than the wider original device. Work quality did not differ significantly between devices when stand characteristics, regeneration success and pre-existing damage were taken into account. Results indicate that mechanical uprooting devices may be further developed to a cost-effective alternative to motor-manual techniques for the early cleaning of direct seeded commercial Scots pine stands.

  • Hallongren, Natural Resources Institute Finland (Luke), Management and Production of Renewable Resources, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: heidi.hallongren@luke.fi (email)
  • Kankaanhuhta, Natural Resources Institute Finland (Luke), Management and Production of Renewable Resources, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: ville.kankaanhuhta@luke.fi
  • Kukkonen, University of Eastern Finland, School of Forest Sciences. P.O. Box 111, FI-80101 Joensuu, Finland E-mail: mikaelkukkonen@hotmail.com
article id 1492, category Research article
Li-Bin Liu, Yang-Yang Wu, Gang Hu, Zhong-Hua Zhang, An-Yun Cheng, Shi-Jie Wang, Jian Ni. (2016). Biomass of karst evergreen and deciduous broad-leaved mixed forest in central Guizhou province, southwestern China: a comprehensive inventory of a 2 ha plot. Silva Fennica vol. 50 no. 3 article id 1492. https://doi.org/10.14214/sf.1492
Keywords: biomass; secondary forest; necromass; karst terrain; carbon inventory
Highlights: Comprehensive inventory of the karst secondary forest based on a 2 ha large plot enhanced the reliability of biomass estimates; The biomass was 158.1 Mg ha−1, and the five dominant tree species accounted for 92.4% of aboveground tree biomass; The estimated necromass of woody debris and litter in the karst secondary forest was 17.6 Mg ha−1.
Abstract | Full text in HTML | Full text in PDF | Author Info

The biomass of a secondary evergreen and deciduous broad-leaved mixed forest was comprehensively inventoried in a permanent 2 ha plot in southwestern China. Biomass models, sub-sampling, soil pit method, and published data were utilized to determine the biomass of all components. Results showed that the total biomass of the forest was 158.1 Mg ha−1; the total biomass included the major aboveground (137.7 Mg ha−1) and belowground (20.3 Mg ha−1) biomass components of vascular plants as well as the minor biomass components of bryophytes (0.078 Mg ha−1) and lichens (0.043 Mg ha−1). The necromass was 17.6 Mg ha−1 and included woody debris (9.0 Mg ha−1) and litter (8.6 Mg ha−1). The spatial pattern of the aboveground biomass was determined by the spatial distribution of dominant trees with large diameter, tall height, and dense wood. The belowground biomass differed in terms of root diameter and decreased with increasing soil depth. The belowground biomass in each soil pit in local habitats was not related to the spatial distribution of woody plants and soil pit depth. The karst forest presented lower biomass compared than the nonkarst forests in the subtropical zone. Biomass carbon in the karst terrains would increase substantially if degraded karst vegetation could be successfully restored to the forest. Comprehensive site-based biomass inventory of karst vegetation will contribute not only to provide data for benchmarking global and regional vegetation and carbon models but also for regional carbon inventory and vegetation restoration.

  • Liu, State Key Laboratory of Environmental Geochemistry, Institute of Geochemistry, Chinese Academy of Sciences, Lincheng West Road 99, 550081 Guiyang, China; Puding Karst Ecosystem Research Station, Chinese Academy of Sciences, 562100 Puding, China; University of Chinese Academy of Sciences, 100049 Beijing, China E-mail: liulibin@mail.gyig.ac.cn
  • Wu, State Key Laboratory of Environmental Geochemistry, Institute of Geochemistry, Chinese Academy of Sciences, Lincheng West Road 99, 550081 Guiyang, China; Puding Karst Ecosystem Research Station, Chinese Academy of Sciences, 562100 Puding, China; University of Chinese Academy of Sciences, 100049 Beijing, China E-mail: wuyang2468@hotmail.com
  • Hu, School of Chemistry and Life Science, Guangxi Teachers Education University, 530001 Nanning, China; Key Laboratory of Beibu Gulf Environment Change and Resources Utilization of Ministry of Education, Guangxi Teachers Education University, 530001 Nanning, China E-mail: ahhugang@gmail.com
  • Zhang, School of Chemistry and Life Science, Guangxi Teachers Education University, 530001 Nanning, China; Key Laboratory of Beibu Gulf Environment Change and Resources Utilization of Ministry of Education, Guangxi Teachers Education University, 530001 Nanning, China E-mail: gxtczzh@gmail.com
  • Cheng, State Key Laboratory of Environmental Geochemistry, Institute of Geochemistry, Chinese Academy of Sciences, Lincheng West Road 99, 550081 Guiyang, China; Puding Karst Ecosystem Research Station, Chinese Academy of Sciences, 562100 Puding, China E-mail: chenganyun@vip.skleg.cn
  • Wang, State Key Laboratory of Environmental Geochemistry, Institute of Geochemistry, Chinese Academy of Sciences, Lincheng West Road 99, 550081 Guiyang, China; Puding Karst Ecosystem Research Station, Chinese Academy of Sciences, 562100 Puding, China E-mail: wangshijie@vip.skleg.cn
  • Ni, State Key Laboratory of Environmental Geochemistry, Institute of Geochemistry, Chinese Academy of Sciences, Lincheng West Road 99, 550081 Guiyang, China; Puding Karst Ecosystem Research Station, Chinese Academy of Sciences, 562100 Puding, China E-mail: nijian@vip.skleg.cn (email)
article id 1461, category Research article
Ludmila Novitskaya, Nadezhda Nikolaeva, Natalia Galibina, Tatiana Tarelkina, Ludmila Semenova. (2016). The greatest density of parenchyma inclusions in Karelian birch wood occurs at confluences of phloem flows. Silva Fennica vol. 50 no. 3 article id 1461. https://doi.org/10.14214/sf.1461
Keywords: Betula pendula; patterned wood; parenchyma; branch attachments; forks; sucrose content
Highlights: Dark-colored inclusions creating the figured pattern in Karelian birch wood consist of storage parenchyma cells; Their greatest density is formed above branch attachments and below forks; In these zones, the sucrose content is elevated since photoassimilate flows of the trunk and branches merge into one pathway; A high level of sucrose enhances the differentiation of parenchyma cells.
Abstract | Full text in HTML | Full text in PDF | Author Info

The specific pattern of the wood of Karelian birch (Betula pendula Roth var. carelica (Merckl.) Hämet-Ahti), is created mainly by dark-coloured inclusions of parenchyma tissue. Our study revealed that the greatest density of parenchyma inclusions in Karelian birch wood is observed above branch attachments to the trunk and below forks. In the place of branch attachment, phloem flows of photoassimilates (sucrose) from the branch and along the trunk merge into one pathway, causing a rise in sucrose content in tissues there. In the area below the fork, sucrose flows from two (or more) trunk axes are combined. Many studies have demonstrated that elevated sucrose level is associated with the differentiation of parenchyma. We believe that where large phloem fluxes merge a high level of sucrose promotes mass differentiation of parenchyma cells instead of fibers and vessels. As a result, the density of the figured pattern in the wood increases. The obtained data have a practical value and can be used in developing recommendations for Karelian birch cultivation.

  • Novitskaya, Forest Research Institute, Karelian Research Center, Russian Academy of Sciences, Pushkinskaya str. 11, 185910, Petrozavodsk, Russia E-mail: ludnovits@rambler.ru (email)
  • Nikolaeva, Forest Research Institute, Karelian Research Center, Russian Academy of Sciences, Pushkinskaya str. 11, 185910, Petrozavodsk, Russia E-mail: kar-birch@mail.ru
  • Galibina, Forest Research Institute, Karelian Research Center, Russian Academy of Sciences, Pushkinskaya str. 11, 185910, Petrozavodsk, Russia E-mail: galibina@krc.karelia.ru
  • Tarelkina, Forest Research Institute, Karelian Research Center, Russian Academy of Sciences, Pushkinskaya str. 11, 185910, Petrozavodsk, Russia E-mail: karelina.t.v@gmail.com
  • Semenova, Forest Research Institute, Karelian Research Center, Russian Academy of Sciences, Pushkinskaya str. 11, 185910, Petrozavodsk, Russia E-mail: mi7enova@gmail.com
article id 1441, category Research article
Dorota Zawadzka, Stanisław Drozdowski, Grzegorz Zawadzki, Jerzy Zawadzki. (2016). The availability of cavity trees along an age gradient in fresh pine forests. Silva Fennica vol. 50 no. 3 article id 1441. https://doi.org/10.14214/sf.1441
Keywords: Pinus sylvestris; forest management; Poland; Augustów Forest; cavity-nesting birds; woodpeckers
Highlights: The density of cavity trees in pine-dominated, managed forests varied in relation to stand age and was highest in stands older than 130 years of age; Cavities excavated by woodpeckers dominated among all cavities; The number of trees with cavities appears insufficient to ensure the effective protection of bird diversity in managed stands of Augustów Forest.
Abstract | Full text in HTML | Full text in PDF | Author Info

Given their importance as a resource for many forest organisms, tree cavities were inventoried in the managed pine forests of north-east Poland, in relation to the: 70–100, 101–130 and >130 year age-classes within the clear-cutting system. The densities at which cavities were present was found to depend on forest age, given that stands 70–100 years old were characterised by an average density of 0.62 trees ha–1, while forests older than 130 years reported 3.28 trees ha–1. Stands aged 70–100 years differed from those aged 130+ in having just 0.27 trees ha–1 of cavity trees, as compared with 2.91 trees ha–1. The total volume of cavity trees in stands up to 100 years old was 0.37 m3 ha–1 on average, as compared with 5.42 m3 ha–1 in stands over 130 years old. The cavities created by woodpeckers constituted 76% of all of those found, and included 53% excavated by great spotted woodpeckers (Dendrocopos major L.) and 23% by black woodpeckers (Dryocopus martius L.) The proportion of cavities excavated by D. major was highest in the youngest age class of stands. There, cavities made by D. martius constituted only 8% of the total, as compared with 31% in the oldest stands. The abundance of cavity trees thus differed along an age gradient, though in any event the availability of cavity trees appears to be too limited to provide for the needs of hole-nesting birds. Forest managers must thus take more account than hitherto of the need to protect cavity trees.

  • Zawadzka, Institute of Forest Science, University of Łódź, Branch in Tomaszów Mazowiecki, Konstytucji 3 Maja 65/67, 97-200 Tomaszów Mazowiecki, Poland E-mail: dorota_zaw@wp.pl
  • Drozdowski, Department of Silviculture, Warsaw University of Life Sciences - SGGW, Nowoursynowska 159, 02-776 Warsaw, Poland E-mail: stanislaw_drozdowski@sggw.pl (email)
  • Zawadzki, Eagle Conservation Committee, Okółek 14, 16-506 Giby, Poland E-mail: grzesiekgfz@op.pl
  • Zawadzki, Eagle Conservation Committee, Okółek 14, 16-506 Giby, Poland E-mail: jerzy_zaw@wp.pl
article id 1313, category Research article
Jonathan Sheppard, Christopher Morhart, Heinrich Spiecker. (2016). Bark surface temperature measurements on the boles of wild cherry (Prunus avium) grown within an agroforestry system. Silva Fennica vol. 50 no. 3 article id 1313. https://doi.org/10.14214/sf.1313
Keywords: valuable timber; sunscald; sunburn; southwest disease; cambium; alley cropping
Highlights: Widely spaced trees within agroforestry systems are at risk of sun induced damages; Bark surface temperature on the south western bole face reached nearly 50 °C in summer and experienced a maximum range of 38 °C within a 24 hour period in spring; Maximum and minimum daily bark surface temperatures are modelled using climatic and solar position data; The application of white paint to stems reduces the bark surface temperature.
Abstract | Full text in HTML | Full text in PDF | Author Info

Growing Prunus avium L. within an agroforestry system (AFS) may result in sun damage to cambial tissues on sun-exposed bole faces. There are two periods of risk of damage caused by insolation to exposed tree boles, the summer, when cambial temperatures become too high, or during winter, when the frozen dormant cambium tissue thaws and then rapidly re-freezes, a phenomenon commonly referred to as sunscald or southwest disease. Damage on the south western bole face was observed on a number of P. avium within an AFS. Five trees were sampled to assess the period in time that damage occurred. To retrospectively investigate such damage, bark surface temperature data were collected over a two year period for a further five P. avium and analysed. It was shown that bark surface temperature on the south western bole face reached nearly 50 °C during summer and experienced a maximum range of 38 °C within a 24 hour period in spring. A specially formulated white paint was applied to two trees, thus, testing a method to reduce the risk of sun damage. Two models were constructed to predict maximum and minimum daily bark surface temperature using maximum, minimum and mean daily air temperature, daily sum of sunshine hours, cloud cover, wind speed, relative humidity, maximum solar elevation and height on the tree bole as predictor variables. The damage occurred during winter 2009/2010. The models were used to identify maximum and minimum bark surface temperatures during that winter enabling the identification of possible damage events.

  • Sheppard, Chair of Forest Growth and Dendroecology, Albert-Ludwigs-University Freiburg, Tennenbacher Straße 4, 79106 Freiburg, Germany ORCID http://orcid.org/0000-0002-4959-7069 E-mail: jonathan.sheppard@iww.uni-freiburg.de (email)
  • Morhart, Chair of Forest Growth and Dendroecology, Albert-Ludwigs-University Freiburg, Tennenbacher Straße 4, 79106 Freiburg, Germany ORCID http://orcid.org/0000-0003-1874-5011 E-mail: christopher.morhart@iww.uni-freiburg.de
  • Spiecker, Chair of Forest Growth and Dendroecology, Albert-Ludwigs-University Freiburg, Tennenbacher Straße 4, 79106 Freiburg, Germany E-mail: instww@uni-freiburg.de
article id 1521, category Research article
Kalle Karttunen, Juha Laitila, Tapio Ranta. (2016). First-thinning harvesting alternatives for industrial or energy purposes based on regional Scots pine stand simulations in Finland. Silva Fennica vol. 50 no. 2 article id 1521. https://doi.org/10.14214/sf.1521
Keywords: harvesting; energy wood; stand simulation; stumpage price; small-diameter wood
Highlights: Small-diameter delimbed wood from Scots pine stands delivered directly for energy use was the most cost-efficient option in terms of the total supply-chain cost in comparison with corresponding industrial use or a whole-tree supply chain for energy use; Forest-management and harvesting decisions influenced the removal of forest biomass and stumpage price as well as the total supply-chain costs for forest biomass; The greatest cost-reduction potential (10.0%, 4.00 € m–3) was achieved for the delimbed energy wood’s supply chain in the regional case of South Savo in eastern Finland.
Abstract | Full text in HTML | Full text in PDF | Author Info

Combining research into forest management stand conditions and wood supply chain processes has been missing from earlier forestry studies. There is a clear need to develop more cost-efficient small-diameter wood production, harvesting and transportation methods from first thinning, which could be used for either industrial or energy wood purposes. This study considers the total cost for small-diameter wood originating from young Scots pine (Pinus sylvestris L.) dominated stands. Pine pulpwood is the most harvested and most used roundwood assortment, use of which is expected to rise following new pulp-mill investments in Finland. In addition, utilisation of small-diameter trees directly for energy purposes has been increasing steadily in recent years. The aim of the study was to determine the cost-reduction potential of alternative forest management options and supply chains for small diameter-wood in the regional case of South Savo in eastern Finland. The total costs of three distinct scenarios were studied on the basis of forest management, first-thinning harvesting methods, and transportation: 1) industrial wood, 2) delimbed energy wood, and 3) whole trees for energy purposes. The cost-reduction potential for energy-wood supply chains from first thinning was compared to the industrial supply chain. Small-diameter delimbed wood delivered straight for energy purposes was found to be the most cost-efficient as far as the total cost of the supply chain is concerned. More cost-efficient small-diameter wood processes can be found by linking forest stand simulations with supply chain analysis.

  • Karttunen, Lappeenranta University of Technology, LUT School of Energy Systems, Laboratory of Bioenergy, Lönnrotinkatu 7, FI-50100 Mikkeli, Finland E-mail: kalle.karttunen@lut.fi
  • Laitila, Natural Resources Institute Finland (Luke), Bio-based business and industry, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: juha.laitila@luke.fi
  • Ranta, Lappeenranta University of Technology, LUT School of Energy Systems, Laboratory of Bioenergy, Lönnrotinkatu 7, FI-50100 Mikkeli, Finland E-mail: tapio.ranta@lut.fi (email)
article id 1520, category Research article
Tomáš Kolář, Kyriaki Giagli, Miroslav Trnka, Emílie Bednářová, Hanuš Vavrčík, Michal Rybníček. (2016). Response of the leaf phenology and tree-ring width of European beech to climate variability. Silva Fennica vol. 50 no. 2 article id 1520. https://doi.org/10.14214/sf.1520
Keywords: dendroclimatology; Fagus sylvatica; temperature; soil moisture; radial increment
Highlights: The timing of leaf phenological phases in European beech is controlled by temperature; Tree-ring width variations in European beech positively reflect growing season precipitation and soil water availability; The water availability in the top 40 cm of soil layer is more important for European beech growth than that in the deeper layers; Extension of the phenological growing season does not increase tree-ring width.
Abstract | Full text in HTML | Full text in PDF | Author Info

Various environmental conditions (heat waves and drought events) strongly affect leaf and xylem phenology. Disentangling the influence of temperature, precipitation and soil moisture content (AWR) on the forest productivity remains an important research area. We analyzed the impact of climate variability on the leaf phenology (10 sample trees) and radial growth (17 sample trees) of European beech (Fagus sylvatica L.). The study was conducted on 130-year-old European beech trees growing in a temperate forest stand in the Czech Republic. Detailed 20-year phenological monitoring was performed at the study site (1992–2011). As expected, leaf phenological events were mainly driven by the growing season temperatures. Leaf unfolding was highly affected positively by spring temperatures and the top-layer (to 40 cm) AWR in March. The correlation of tree-ring width with the interpolated climate data was positive significant for the growing season AWR and precipitation signal. Furthermore, the water availability in the top soil layer was found to be an important predictor of tree growth and extremely low growth occurrence. The extended phenological growing season, which was caused by a temperature increase, was not followed by an increased tree-ring width. The examined relationships point out the significance of the water availability in the top soil layer in European beech stands.

  • Kolář, Department of Wood Science, Faculty of Forestry and Wood Technology, Mendel University in Brno, Zemědělská 3, 613 00 Brno, Czech Republic; Global Change Research Institute, The Czech Academy of Sciences, Bělidla 986/4a, 603 00 Brno, Czech Republic E-mail: koldatom@gmail.com (email)
  • Giagli, Department of Wood Science, Faculty of Forestry and Wood Technology, Mendel University in Brno, Zemědělská 3, 613 00 Brno, Czech Republic E-mail: giagli@node.mendelu.cz
  • Trnka, Global Change Research Institute, The Czech Academy of Sciences, Bělidla 986/4a, 603 00 Brno, Czech Republic; Department of Agrosystems and Bioclimatology, Faculty of Agronomy, Mendel University in Brno, Zemědělská 1, 613 00 Brno, Czech Republic E-mail: mirek_trnka@yahoo.com
  • Bednářová, Institute of Forest Ecology, Faculty of Forestry and Wood Technology, Mendel University in Brno, Zemědelská 3, 61300 Brno, Czech Republic E-mail: bednarov@mendelu.cz
  • Vavrčík, Department of Wood Science, Faculty of Forestry and Wood Technology, Mendel University in Brno, Zemědělská 3, 613 00 Brno, Czech Republic E-mail: vavrcik@mendelu.cz
  • Rybníček, Department of Wood Science, Faculty of Forestry and Wood Technology, Mendel University in Brno, Zemědělská 3, 613 00 Brno, Czech Republic; Global Change Research Institute, The Czech Academy of Sciences, Bělidla 986/4a, 603 00 Brno, Czech Republic E-mail: michalryb@post.cz
article id 1510, category Research article
Tähti Pohjanmies, Sakina Elshibli, Pertti Pulkkinen, Mari Rusanen, Pekka Vakkari, Helena Korpelainen, Tomas Roslin. (2016). Fragmentation-related patterns of genetic differentiation in pedunculate oak (Quercus robur) at two hierarchical scales. Silva Fennica vol. 50 no. 2 article id 1510. https://doi.org/10.14214/sf.1510
Keywords: marginal populations; Finland; genetic diversity; microsatellites
Highlights: While long-lived, widespread tree species should be resistant to genetic impoverishment, we detected high differentiation among populations and pronounced genetic structure within populations of Quercus robur in Finland; These patterns seem indicative of population processes active at range margins, and of disequilibrium following historic habitat change; Preservation of remaining genetic variation is thus important in the conservation of Q. robur.
Abstract | Full text in HTML | Full text in PDF | Author Info

Populations at species’ range margins are expected to show lower genetic diversity than populations at the core of the range. Yet, long-lived, widespread tree species are expected to be resistant to genetic impoverishment, thus showing comparatively high genetic diversity within populations and low differentiation among populations. Here, we study the distribution of genetic variation in the pedunculate oak (Quercus robur L.) at its range margin in Finland at two hierarchical scales using 15 microsatellite loci. At a regional scale, we compared variation within versus among three oak populations. At a landscape scale, we examined genetic structuring within one of these populations, growing on an island of ca 5 km2. As expected, we found the majority of genetic variation in Q. robur to occur within populations. Nonetheless, differentiation among populations was markedly high (FST = 0.12) compared with values reported for populations of Q. robur closer to the core of its range. At the landscape level, some spatial and temporal sub-structuring was observed, likely explained by the history of land-use on the island. Overall, Q. robur fulfils the expectation of the central-marginal hypothesis of high differentiation among marginal populations, but the notable population differentiation has most likely been influenced also by the long, ongoing fragmentation of populations. Finnish oak populations may still be adjusting to the drastic habitat changes of the past centuries. Preservation of genetic variation within the remaining stands is thus an important factor in the conservation of Q. robur at its range margin.

  • Pohjanmies, University of Helsinki, Department of Agricultural Sciences, Spatial Foodweb Ecology Group, P.O. Box 27, FI-00014 University of Helsinki, Finland; University of Jyväskylä, Department of Biological and Environmental Sciences, P.O. Box 35, FI-40014 University of Jyväskylä, Finland E-mail: tahti.t.pohjanmies@jyu.fi (email)
  • Elshibli, Natural Resources Institute Finland (Luke), Green technology, P.O. Box 18, FI-01301 Vantaa, Finland; University of Helsinki, Department of Agricultural Sciences, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: sakina.elshibli@helsinki.fi
  • Pulkkinen, Natural Resources Institute Finland (Luke), Green technology, Haapastensyrjäntie 34, FI-12600 Läyliäinen, Finland E-mail: pertti.pulkkinen@luke.fi
  • Rusanen, Natural Resources Institute Finland (Luke), Green technology, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: mari.rusanen@luke.fi
  • Vakkari, Natural Resources Institute Finland (Luke), Green technology, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: pekka.vakkari@luke.fi
  • Korpelainen, University of Helsinki, Department of Agricultural Sciences, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: helena.korpelainen@helsinki.fi
  • Roslin, University of Helsinki, Department of Agricultural Sciences, Spatial Foodweb Ecology Group, P.O. Box 27, FI-00014 University of Helsinki, Finland; Swedish University of Agricultural Sciences, Department of Ecology, P.O. Box 7044, SE-750 07 Uppsala, Sweden E-mail: tomas.roslin@helsinki.fi
article id 1495, category Research article
Per-Ola Olsson, Tuula Kantola, Päivi Lyytikäinen-Saarenmaa, Anna Maria Jönsson, Lars Eklundh. (2016). Development of a method for monitoring of insect induced forest defoliation – limitation of MODIS data in Fennoscandian forest landscapes. Silva Fennica vol. 50 no. 2 article id 1495. https://doi.org/10.14214/sf.1495
Keywords: remote sensing; insect defoliation detection; coarse-resolution; EVI2; z-score; Sentinel-2
Highlights: We developed and tested a method to monitor insect induced defoliation in forests based on coarse-resolution satellite data (MODIS); MODIS data may fail to detect defoliation in fragmented landscapes, especially if defoliation history is long. More homogenous forests results in higher detection accuracies; The method may be applied to future coarse and medium-resolution satellite data with high temporal resolution.
Abstract | Full text in HTML | Full text in PDF | Author Info

We investigated if coarse-resolution satellite data from the MODIS sensor can be used for regional monitoring of insect disturbances in Fennoscandia. A damage detection method based on z-scores of seasonal maximums of the 2-band Enhanced Vegetation Index (EVI2) was developed. Time-series smoothing was applied and Receiver Operating Characteristics graphs were used for optimisation. The method was developed in fragmented and heavily managed forests in eastern Finland dominated by Scots pine (Pinus sylvestris L.) (pinaceae) and with defoliation of European pine sawfly (Neodiprion sertifer Geoffr.) (Hymenoptera: Diprionidae) and common pine sawfly (Diprion pini L.) (Hymenoptera: Diprionidae). The method was also applied to subalpine mountain birch (Betula pubescens ssp. Czerepanovii N.I. Orlova) forests in northern Sweden, infested by autumnal moth (Epirrita autumnata Borkhausen) and winter moth (Operophtera brumata L.). In Finland, detection accuracies were fairly low with 50% of the damaged stands detected, and a misclassification of healthy stands of 22%. In areas with long outbreak histories the method resulted in extensive misclassification. In northern Sweden accuracies were higher, with 75% of the damage detected and a misclassification of healthy samples of 19%. Our results indicate that MODIS data may fail to detect damage in fragmented forests, particularly when the damage history is long. Therefore, regional studies based on these data may underestimate defoliation. However, the method yielded accurate results in homogeneous forest ecosystems and when long-enough periods without damage could be identified. Furthermore, the method is likely to be useful for insect disturbance detection using future medium-resolution data, e.g. from Sentinel‑2.

  • Olsson, Lund University, Department of Physical Geography and Ecosystem Science, Sölvegatan 12, S-223 62 Lund, Sweden E-mail: per-ola.olsson@nateko.lu.se (email)
  • Kantola, Texas A & M University, Knowledge Engineering Laboratory, Department of Entomology, College Station, TX, USA E-mail: tuula.kantola@helsinki.fi
  • Lyytikäinen-Saarenmaa, University of Helsinki, Department of Forest Sciences, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: paivi.lyytikainen-saarenmaa@helsinki.fi
  • Jönsson, Lund University, Department of Physical Geography and Ecosystem Science, Sölvegatan 12, S-223 62 Lund, Sweden E-mail: anna_maria.jonsson@nateko.lu.se
  • Eklundh, Lund University, Department of Physical Geography and Ecosystem Science, Sölvegatan 12, S-223 62 Lund, Sweden E-mail: lars.eklundh@nateko.lu.se
article id 1475, category Research article
Jiaxi Wang, Haiqun Yu, Guolei Li, Feng Zhang. (2016). Growth and nutrient dynamics of transplanted Quercus variabilis seedlings as influenced by pre-hardening and fall fertilization. Silva Fennica vol. 50 no. 2 article id 1475. https://doi.org/10.14214/sf.1475
Keywords: nutrient loading; nutrient storage; nursery transplanting; seedling quality
Highlights: High pre-hardening fertilization favored seedling growth and nutrient storage at the rapid growth and hardening phases following transplantation. Overall, high fall fertilization was beneficial only at the hardening phase; The combination of 100 mg N seedling–1 during pre-hardening with 36 mg N seedling–1 during hardening was recommended for satisfactory transplanting performance for Quercus variabilis.
Abstract | Full text in HTML | Full text in PDF | Author Info

Stored nutrient reserves are closely correlated with survival and growth of transplanted seedlings. Previous studies have proven that combining pre-hardening fertilization (PF) with fall fertilization (FF) built seedling nutrient reserves more effectively; however, their effect on transplanting performance is poorly documented. We investigated the independent and interacting effects of 2 levels of PF and 4 levels of FF on seedling growth, nutrient acquisition and accumulation during different growth phases 1 year after transplanting of Quercus variabilis Blume in a nursery. High PF benefited nutrient reserves and subsequent transplanted seedling growth and tissue nutrient storage at the end of the rapid growth and hardening phases. Fall fertilization with 36 mg N increased stem dry mass and tissue nutrient content at the end of the hardening phase. At the conclusion of establishment, PF and FF showed a significant interaction for N and K uptake from soil. At the end of the rapid growth and hardening phases, high PF consistently increased nutrient uptake. Enhanced N and K uptake occurred following application of 36 mg N of FF at the end of the hardening phase. Distinct roles for PF and FF on 3 phases of transplanted seedlings demonstrated the necessity to evaluate fertilization in terms of nutrient reserves and subsequent transplanting performance in consecutive phases. Combining 100 mg N seedling–1 during pre-hardening with 36 mg N seedling–1 during fall yielded ideal transplanting performance for Quercus variabilis seedlings.

  • Wang, Key Laboratory for Silviculture and Conservation, Ministry of Education; Beijing Laboratory of Urban and Rural Ecological Environment, Beijing Forestry University, 35 East Qinghua Road, Haidian District, Beijing 100083, China E-mail: wjx198979@163.com
  • Yu, Beijing Forestry Carbon Administration, room 201, No.1 Xiao Huang Zhuang Bei Jie, Dongcheng District, Beijing 100013, China E-mail: yuhq@bfdic.com
  • Li, Key Laboratory for Silviculture and Conservation, Ministry of Education; Beijing Laboratory of Urban and Rural Ecological Environment, Beijing Forestry University, 35 East Qinghua Road, Haidian District, Beijing 100083, China E-mail: glli226@163.com (email)
  • Zhang, Beijing Forestry Carbon Administration, room 201, No.1 Xiao Huang Zhuang Bei Jie, Dongcheng District, Beijing 100013, China E-mail: zhangf@bfdic.com
article id 1474, category Research article
Cedric A. Goussanou, Sabin Guendehou, Achille E. Assogbadjo, Maguette Kaire, Brice Sinsin, Aida Cuni-Sanchez. (2016). Specific and generic stem biomass and volume models of tree species in a West African tropical semi-deciduous forest. Silva Fennica vol. 50 no. 2 article id 1474. https://doi.org/10.14214/sf.1474
Keywords: carbon stock; allometric equations; non-destructive sampling; basic wood density
Highlights: Non-destructive sampling approach applied to derive ground truth observations and generate robust basic wood densities; Species-specific and generic allometric equations; Specific equations have better predictive capabilities than generic models.
Abstract | Full text in HTML | Full text in PDF | Author Info

The quantification of the contribution of tropical forests to global carbon stocks and climate change mitigation requires availability of data and tools such as allometric equations. This study made available volume and biomass models for eighteen tree species in a semi-deciduous tropical forest in West Africa. Generic models were also developed for the forest ecosystem, and basic wood density determined for the tree species. Non-destructive sampling approach was carried out on five hundred and one sample trees to analyse stem volume and biomass. From the modelling of volume and biomass as functions of diameter at breast height (Dbh) and stem height, logarithmic models had better predictive capabilities. The model validation showed that in absence of data on height, models using Dbh only as variable was an alternative. The comparison of basic wood densities to data published in literature enabled to conclude that the non-destructive sampling was a good approach to determining reliable basic wood density. The comparative analysis of species-specific models in this study with selected generic models for tropical forests indicated low probability to identify effective generic models with good predictive ability for biomass. Given tree species richness of tropical forests, the study demonstrated the hypothesis that species-specific models are preferred to generic models, and concluded that further research should be oriented towards development of specific models to cover the full range of dominant tree species of African forests.

  • Goussanou, Laboratory of Applied Ecology, Faculty of Agronomic Sciences, University of Abomey-Calavi, 01 BP 526 Cotonou, Benin E-mail: cedricgoussanou@gmail.com (email)
  • Guendehou, Laboratory of Applied Ecology, Faculty of Agronomic Sciences, University of Abomey-Calavi, 01 BP 526 Cotonou, Benin; Benin Centre for Scientific and Technical Research, 03 BP 1665 Cotonou, Benin E-mail: sguendehou@yahoo.fr
  • Assogbadjo, Laboratory of Applied Ecology, Faculty of Agronomic Sciences, University of Abomey-Calavi, 01 BP 526 Cotonou, Benin E-mail: assogbadjo@yahoo.fr
  • Kaire, Centre Régional AGRHYMET, Département Formation et Recherche, BP 11011 Niamey, Niger E-mail: m.kaire@agrhymet.ne
  • Sinsin, Laboratory of Applied Ecology, Faculty of Agronomic Sciences, University of Abomey-Calavi, 01 BP 526 Cotonou, Benin E-mail: bsinsin@gmail.com
  • Cuni-Sanchez, University of Copenhagen, Center for Macroecology, Evolution and Climate, Nørregade 10, P.O. Box 2177, 1017 Copenhagen K, Denmark E-mail: aidacuni@hotmail.com
article id 1462, category Research article
Pekka Punttila, Olli Autio, Janne S. Kotiaho, D. Johan Kotze, Olli J. Loukola, Norbertas Noreika, Anna Vuori, Kari Vepsäläinen. (2016). The effects of drainage and restoration of pine mires on habitat structure, vegetation and ants. Silva Fennica vol. 50 no. 2 article id 1462. https://doi.org/10.14214/sf.1462
Keywords: ecological restoration; ditching; Aichi Biodiversity Target 15; Formicidae; pine bogs and fens; transforming and transformed drained mires; water-table level
Highlights: Mire drainage shifted floristic composition and ant assemblages towards forest communities; Raising the water-table level by ditch filling and the thinning of trees affected mire communities positively already 1–3 years after the start of restoration; The extent of tree cover, the coverage of Sphagnum mosses and the water-table level were major determinants of ant assemblage structure.
Abstract | Full text in HTML | Full text in PDF | Author Info

Habitat loss and degradation are the main threats to biodiversity worldwide. For example, nearly 80% of peatlands in southern Finland have been drained. There is thus a need to safeguard the remaining pristine mires and to restore degraded ones. Ants play a pivotal role in many ecosystems and like many keystone plant species, shape ecosystem conditions for other biota. The effects of mire restoration and subsequent vegetation succession on ants, however, are poorly understood. We inventoried tree stands, vegetation, water-table level, and ants (with pitfall traps) in nine mires in southern Finland to explore differences in habitats, vegetation and ant assemblages among pristine, drained (30–40 years ago) and recently restored (1–3 years ago) pine mires. We expected that restoring the water-table level by ditch filling and reconstructing sparse tree stands by cuttings will recover mire vegetation and ants. We found predictable responses in habitat structure, floristic composition and ant assemblage structure both to drainage and restoration. However, for mire-specialist ants the results were variable and longer-term monitoring is needed to confirm the success of restoration since these social insects establish perennial colonies with long colony cycles. We conclude that restoring the water-table level and tree stand structure seem to recover the characteristic vegetation and ant assemblages in the short term. This recovery was likely enhanced because drained mires still had both acrotelm and catotelm, and connectedness was still reasonable for mire organisms to recolonize the restored mires either from local refugia or from populations of nearby mires.

  • Punttila, Finnish Environment Institute, P.O. Box 140, FI-00251 Helsinki, Finland E-mail: pekka.punttila@ymparisto.fi (email)
  • Autio, Centre for Economic Development, Transport and the Environment in South Ostrobothnia, P.O. Box 252, FI-65101 Vaasa, Finland E-mail: olli.autio@ely-keskus.fi
  • Kotiaho, University of Jyväskylä, Department of Biology & Environmental Sciences, P.O. Box 35, FI-40014 Jyväskylä, Finland E-mail: janne.kotiaho@jyu.fi
  • Kotze, University of Helsinki, Department of Environmental Sciences, P.O. Box 65, FI-00014, University of Helsinki, Finland E-mail: johan.kotze@helsinki.fi
  • Loukola, University of Oulu, Department of Biology, P.O. Box 3000, FI-90014 Oulu, Finland E-mail: olli.loukola@gmail.com
  • Noreika, University of Helsinki, Department of Environmental Sciences, P.O. Box 65, FI-00014, University of Helsinki, Finland; University of Helsinki, Department of Biosciences, P.O. Box 65, FI-00014 University of Helsinki, Finland E-mail: norbertas.noreika@gmail.com
  • Vuori, University of Jyväskylä, Department of Biology & Environmental Sciences, P.O. Box 35, FI-40014 Jyväskylä, Finland E-mail: anna@kureniemi.fi
  • Vepsäläinen, University of Helsinki, Department of Biosciences, P.O. Box 65, FI-00014 University of Helsinki, Finland E-mail: kari.vepsalainen@helsinki.fi
article id 1448, category Research article
Andrew McEwan, Natascia Magagnotti, Raffaele Spinelli. (2016). The effects of number of stems per stool on cutting productivity in coppiced Eucalyptus plantations. Silva Fennica vol. 50 no. 2 article id 1448. https://doi.org/10.14214/sf.1448
Keywords: modeling; logging; short rotation forestry; efficiency; operator effect
Highlights: Double- and single stem coppice stools were harvested mechanically; Stem size had the strongest impact on productivity; An experienced operator performed equally well with both stool treatments; Cost was ~10% higher with double stems for the less experienced operator; Operator experience may play a major role when cutting coppice stands.
Abstract | Full text in HTML | Full text in PDF | Author Info

A time study was conducted to determine whether stem crowding had any impact on harvester productivity in Eucalyptus grandis stands. This represents an important element when trying to balance the advantages and disadvantages of coppice management in fast growing plantations designated for mechanized harvesting (i.e. machine felling, delimbing, debarking and cross-cutting). The study material consisted of 446 coppice stems, half of which grew as single stems per stool and half as double stems per stool as a result of different coppice reduction strategies. The dataset was balanced and randomized, with both subsets replicating exactly the same stem size distribution and the single and double stems alternating randomly. Harvester productivity ranged between 6 and 50 m3 under bark per productive machine hour, following the variation of tree diameter from 10 to 40 cm at breast height (1.37 m according to South African standards). Regression analysis indicated that both tree size and stem crowding (e.g. one or two stems per stool) had a significant effect on harvester productivity, which increased with stem size and decreased with stem crowding. However, operator experience may overcome the effect of stem crowding, which was not significant when the harvester was manned by a highly experienced operator. In any case, the effect of stem size was much greater than that of stem crowding, which resulted in a cost difference of less than 10%. However, this figure excludes the possible effects of stem crowding on volume recovery and stem development, which should be addressed in the future.

  • McEwan, Nelson Mandela Metropolitan University – George Campus, Saasveld, 6529, George, South Africa E-mail: Andrew.McEwan@nmmu.ac.za
  • Magagnotti, CNR IVALSA, Via Madonna del Piano 10, I-50019 Sesto Fiorentino (FI), Italy E-mail: magagnotti@ivalsa.cnr.it
  • Spinelli, CNR IVALSA, Via Madonna del Piano 10, I-50019 Sesto Fiorentino (FI), Italy E-mail: spinelli@ivalsa.cnr.it (email)
article id 1414, category Research article
Rami Saad, Jörgen Wallerman, Johan Holmgren, Tomas Lämås. (2016). Local pivotal method sampling design combined with micro stands utilizing airborne laser scanning data in a long term forest management planning setting. Silva Fennica vol. 50 no. 2 article id 1414. https://doi.org/10.14214/sf.1414
Keywords: LIDAR; forest management planning; local pivotal method (LPM); segmentation; most similar neighbor (MSN) imputation; suboptimal loss; Heureka; decision support system
Highlights: Most similar neighbor imputation was used to estimate forest variables using airborne laser scanning data as auxiliary data; For selecting field reference plots the local pivotal method (LPM) was compared to systematic sampling design; The LPM sampling design combined with a micro stand approach showed potential for improvement and has the potential to be a competitive method when considering cost efficiency.
Abstract | Full text in HTML | Full text in PDF | Author Info

A new sampling design, the local pivotal method (LPM), was combined with the micro stand approach and compared with the traditional systematic sampling design for estimation of forest stand variables. The LPM uses the distance between units in an auxiliary space – in this case airborne laser scanning (ALS) data – to obtain a well-spread sample. Two sets of reference plots were acquired by the two sampling designs and used for imputing data to evaluation plots. The first set of reference plots, acquired by LPM, made up four imputation alternatives (varying number of reference plots) and the second set of reference plots, acquired by systematic sampling design, made up two alternatives (varying plot radius). The forest variables in these alternatives were estimated using the nonparametric method of most similar neighbor imputation, with the ALS data used as auxiliary data. The relative root mean square error (RelRMSE), stem diameter distribution error index and suboptimal loss were calculated for each alternative, but the results showed that neither sampling design, i.e. LPM vs. systematic, offered clear advantages over the other. It is likely that the obtained results were a consequence of the small evaluation dataset used in the study (n = 30). Nevertheless, the LPM sampling design combined with the micro stand approach showed potential for improvement and might be a competitive method when considering the cost efficiency.

  • Saad, Swedish University of Agricultural Sciences (SLU), Department of Forest Resource Management, Skogsmarksgränd, SE-901 83 Umeå, Sweden E-mail: rami.saad@slu.se (email)
  • Wallerman, Swedish University of Agricultural Sciences (SLU), Department of Forest Resource Management, Skogsmarksgränd, SE-901 83 Umeå, Sweden E-mail: jorgen.wallerman@slu.se
  • Holmgren, Swedish University of Agricultural Sciences (SLU), Department of Forest Resource Management, Skogsmarksgränd, SE-901 83 Umeå, Sweden E-mail: johan.holmgren@slu.se
  • Lämås, Swedish University of Agricultural Sciences (SLU), Department of Forest Resource Management, Skogsmarksgränd, SE-901 83 Umeå, Sweden E-mail: tomas.lamas@slu.se
article id 1410, category Research article
Seppo Nevalainen, Juho Matala, Kari T. Korhonen, Antti Ihalainen, Ari Nikula. (2016). Moose damage in National Forest Inventories (1986–2008) in Finland. Silva Fennica vol. 50 no. 2 article id 1410. https://doi.org/10.14214/sf.1410
Keywords: Populus tremula; Pinus sylvestris; regeneration; soil preparation; thinning; Betula spp.; Keywords Alces alces; seedling stands; tree species mixture
Highlights: Almost 100 000 stands were studied; The proportion of damage doubled during the study period; Tree species mixture had a clear effect on the damage frequency; The damage was more common in mineral soils than in peatlands, in artificially than in naturally regenerated stands and in stands that needed thinning or clearing or in which soil preparation was used.
Abstract | Full text in HTML | Full text in PDF | Author Info

The occurrence of moose damage was studied using data from three National Forest Inventories (NFIs) accomplished between 1986 and 2008 in Finland. The combined data included a total of 97 390 young stands. The proportion of moose damage increased from 3.6% to 8.6% between the 8th NFI (1986–1994) and the 10th NFI (2004–2008). The majority (75%) of the damage occurred in Scots pine-dominated stands. The proportion of damage was higher in aspen-dominated stands than in stands dominated by any other tree species. The tree species mixture also had a clear effect on the occurrence of damage. Pure Scots pine stands had less damage than mixed Scots pine stands, and moose damage decreased linearly with the increasing proportion of Scots pine. Stands on mineral soil had more frequent moose damage than stands on peatlands. The fertility class of the site had no straightforward effect on the damage frequency. Artificially regenerated stands had more damage than naturally regenerated stands. Accomplished soil preparation measures and the need for thinning or clearing operations increased moose damage. High proportions of moose damage in young stands were found around the country. In the 10th NFI, the largest concentration of damage was found in southwestern Finland. Our study shows the temporal and spatial changes in the occurrence of moose damage and pinpoints some important silvicultural factors affecting the relative risk of young stands over a large geographical area.

  • Nevalainen, Natural Resources Institute Finland (Luke), Management and Production of Renewable Resources, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: seppo.nevalainen@luke.fi (email)
  • Matala, Natural Resources Institute Finland (Luke), Management and Production of Renewable Resources, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: juho.matala@luke.fi
  • Korhonen, Natural Resources Institute Finland (Luke), Economics and society, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: kari.t.korhonen@luke.fi
  • Ihalainen, Natural Resources Institute Finland (Luke), Economics and society, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: antti.ihalainen@luke.fi
  • Nikula, Natural Resources Institute Finland (Luke), Economics and society, P.O. Box 16, FI-96301 Rovaniemi, Finland E-mail: ari.nikula@luke.fi
article id 1386, category Research article
Håkan Lideskog, Magnus Karlberg. (2016). Simulated continuous mounding improvements through ideal machine vision and control. Silva Fennica vol. 50 no. 2 article id 1386. https://doi.org/10.14214/sf.1386
Keywords: site preparation; silviculture; remote sensing; scarification; clearcut obstacles; mounding simulation; work procedures
Highlights: Different strategies for how to utilise machine vision to streamline the mounding head movements were developed and evaluated; The theoretical minimum rate of encountered obstacles while utilising machine vision in continuous mounding is presented, provided that an optimal continuous mounding has been performed; The needed minimum resolution of a machine vision system at work on a clearcut area was found.
Abstract | Full text in HTML | Full text in PDF | Author Info

To promote the growth and survival of regenerated forests, site preparation prior to tree planting on clearcuts is necessary. This is often performed with scarifiers, either through trenching or mounding. Mounding is generally considered better in a plant survival perspective but is inefficient on obstacle-rich clearcuts. By utilising machine vision through e.g. remote sensing methods, new strategies can enable efficient mound positioning. In this paper, three realistic strategies utilizing ideal clearcut object identification through machine vision have been developed that can be used for more efficient mounding. The results show that mounding efficiency can be significantly improved with a new mound positioning strategy that employs ideal object identification, especially on obstacle-rich clearcuts.

 

 

  • Lideskog, Luleå University of Technology, Department of Engineering Sciences and Mathematics, Division of Product and Production Development, SE-971 87 Luleå, Sweden E-mail: hakan.lideskog@ltu.se (email)
  • Karlberg, Luleå University of Technology, Department of Engineering Sciences and Mathematics, Division of Product and Production Development, SE-971 87 Luleå, Sweden E-mail: magnus.karlberg@ltu.se
article id 1323, category Research article
Tiina Laine, Kalle Kärhä, Antti Hynönen. (2016). A survey of the Finnish mechanized tree-planting industry in 2013 and its success factors. Silva Fennica vol. 50 no. 2 article id 1323. https://doi.org/10.14214/sf.1323
Keywords: regeneration; boreal; forestry; silviculture; mechanization; planting machines; critical success factors (CSFs)
Highlights: In 2013, 31 planting machines were operated by 22 businesses and planted 4.7 million seedlings on 2663 hectares in Finland; Critical success factors included expertise of planting machine operators, high quality planting, adequate amount of work, stoniness, and removal of slash; Growth of the industry will depend on improved cost-efficiency, appropriate worksites, marketing, development of planting machines.
Abstract | Full text in HTML | Full text in PDF | Author Info

The aim of the study was to update the information pertaining to mechanized tree-planting activity in Finland in 2013 and its success factors. All businesses providing a mechanized tree-planting service were interviewed and asked to describe their equipment and activities, identify critical success factors (CSFs), and suggest areas for improvement. In 2013, 31 planting machines (18 Bracke P11.a, 11 M-Planter and 2 Risutec) operated by 22 businesses planted approximately 4.7 million seedlings on 2663 hectares. CSFs included expertise of planting machine operators, high quality planting, adequate amount of work, stoniness, and removal of slash. Based on the survey, some recommendations for improving mechanized planting work can be made. Firstly, improving the cost-efficiency of mechanized planting is necessary to enhance businesses’ profitability. Secondly, worksite selection is crucial as stoniness, stumps and slash debris diminish productivity. Lastly, the popularity of mechanized planting in the future will benefit from more marketing. Many businesses were unwilling to increase the area of service, invest in new equipment, or increase the volume of planting work but they believed that mechanized planting will become more popular in the near future.

  • Laine, Natural Resources Institute Finland (Luke), Management and Production of Renewable Resources, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: tiina.laine@luke.fi (email)
  • Kärhä, Stora Enso Wood Supply Finland, P.O. Box 309, FI-00101 Helsinki, Finland E-mail: kalle.karha@storaenso.com
  • Hynönen, University of Eastern Finland, Faculty of Science and Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: hynonena@gmail.com
article id 1442, category Research article
Silva Šēnhofa, Mārtiņš Zeps, Roberts Matisons, Jānis Smilga, Dagnija Lazdiņa, Āris Jansons. (2015). Effect of climatic factors on tree-ring width of Populus hybrids in Latvia. Silva Fennica vol. 50 no. 1 article id 1442. https://doi.org/10.14214/sf.1442
Keywords: dendroclimatology; hybrid aspen; hybrid poplar; fast-growing hybrids; weather conditions
Highlights: Hybrid poplar and hybrid aspen were sensitive to temperature in summer and dormant periods, but none of the tested factors were strictly limiting; Hybrid poplar was sensitive to a higher number of climatic factors than hybrid aspen; Temperature showed a negative correlation with tree-ring width.
Abstract | Full text in HTML | Full text in PDF | Author Info

Fast-growing hybrids of Populus L. have an increasing importance as a source of renewable energy and as industrial wood. Nevertheless, the long-term sensitivity of Populus hybrids to weather conditions and hence to possible climatic hazards in Northern Europe have been insufficiently studied, likely due to the limited age of the trees (short rotation). In this study, the climatic sensitivity of ca. 65-year-old hybrid poplars (Populus balsamifera L. × P. laurifolia Ledeb.), growing at two sites in the western part of Latvia, and ca. 55-year-old hybrid aspens (Populus tremuloides Michx. × P. tremula L.), growing in the eastern part of Latvia, have been studied using classical dendrochronological techniques. The high-frequency variation of tree-ring width (TRW) of hybrid poplar from both sites was similar, but it differed from hybrid aspen due to the diverse parental species and geographic location of the stands. Nevertheless, some common tendencies in TRW were observed for both hybrids. Climatic factors influencing TRW were generally similar for both hybrids, but their composition differed. The strength of climate-TRW relationships was similar, but the hybrid poplar was affected by a higher number of climatic factors. Hybrid poplar was sensitive to factors related to water deficit in late summer in the previous and current years. Hybrid aspen was sensitive to conditions in the year of formation of tree-ring. Both hybrids also displayed a reaction to temperature during the dormant period. The observed climate-growth relationships suggest that increasing temperatures might burden the radial growth of the studied hybrids of Populus.

  • Šēnhofa, LSFRI “Silava”, Rigas str. 111, Salaspils, Latvia, LV2169 E-mail: silva.senhofa@gmail.com
  • Zeps, LSFRI “Silava”, Rigas str. 111, Salaspils, Latvia, LV2169 E-mail: martins.zeps@silava.lv
  • Matisons, LSFRI “Silava”, Rigas str. 111, Salaspils, Latvia, LV2169 E-mail: robism@inbox.lv (email)
  • Smilga, LSFRI “Silava”, Rigas str. 111, Salaspils, Latvia, LV2169 E-mail: janis.smilga@silava.lv
  • Lazdiņa, LSFRI “Silava”, Rigas str. 111, Salaspils, Latvia, LV2169 E-mail: dagnija.lazdina@silava.lv
  • Jansons, LSFRI “Silava”, Rigas str. 111, Salaspils, Latvia, LV2169 E-mail: aris.jansons@silava.lv
article id 1428, category Research article
Gernot Erber, Franz Holzleitner, Maximilian Kastner, Karl Stampfer. (2015). Effect of multi-tree handling and tree-size on harvester performance in small-diameter hardwood thinnings. Silva Fennica vol. 50 no. 1 article id 1428. https://doi.org/10.14214/sf.1428
Keywords: productivity; thinning; energy wood; motor-manual; accumulating harvester head; delimbing
Highlights: Harvesting with the accumulating energy wood head EF28 was studied under small tree dimension (8 dm3) in hardwood thinnings; Reasonable productivity was achieved; Maximum achieved cutting diameter in hornbeam stand was 23 cm and 15% lower than in softwood stands; Head has potential under such conditions.
Abstract | Full text in HTML | Full text in PDF | Author Info

Early thinnings are laborious and costly. Thus forest companies are searching for cost and time efficient ways to carry out this task. The study’s purpose was to determine the productivity of the EF28 accumulating energy wood harvesting head in harvesting small-diameter hornbeam (Carpinus betulus L.) undergrowth trees and evaluate the effect of its multi-tree handling (MTH) capacity on time consumption. The harvester was a wheeled, three-axle Komatsu 911. A time study of 7.1 hours on 19 plots, with a total area of 0.76 ha was conducted. On average, the harvested tree volume was 8 dm³ and the stand density was 2666 trees/ha. The productivity was modelled with MTH conduction, mean diameter at breast height and the number of trees handled per cycle as independent variables. On average, MTH took 27% longer per cycle, increased extracted volume per cycle by 33% and consequently increased productivity with 5.0%. In 71.9% of the cycles more than one tree was handled and if so, dimensions were smaller than in single-tree handling (5.8 cm vs. 12.0 cm). Maximum felling diameter of 23 cm was about 15% smaller than in softwood (according to the manufacturer’s specifications) and the driver didn’t exploit the EF28’s theoretical potential in terms of trees handled per cycle. It can be concluded that the head could significantly improve productivity in small-diameter wood procurement.

  • Erber, Addresses University of Natural Resources and Life Sciences Vienna, Department of Forest and Soil Sciences, Institute of Forest Engineering, Peter-Jordan Straße 82/3, A-1190 Vienna, Austria E-mail: gernot.erber@boku.ac.at (email)
  • Holzleitner, Addresses University of Natural Resources and Life Sciences Vienna, Department of Forest and Soil Sciences, Institute of Forest Engineering, Peter-Jordan Straße 82/3, A-1190 Vienna, Austria E-mail: franz.holzleitner@boku.ac.at
  • Kastner, Addresses University of Natural Resources and Life Sciences Vienna, Department of Forest and Soil Sciences, Institute of Forest Engineering, Peter-Jordan Straße 82/3, A-1190 Vienna, Austria E-mail: maximilian.kastner@boku.ac.at
  • Stampfer, Addresses University of Natural Resources and Life Sciences Vienna, Department of Forest and Soil Sciences, Institute of Forest Engineering, Peter-Jordan Straße 82/3, A-1190 Vienna, Austria E-mail: karl.stampfer@boku.ac.at
article id 1413, category Research article
Ilya Potapov, Marko Järvenpää, Markku Åkerblom, Pasi Raumonen, Mikko Kaasalainen. (2015). Data-based stochastic modeling of tree growth and structure formation. Silva Fennica vol. 50 no. 1 article id 1413. https://doi.org/10.14214/sf.1413
Keywords: terrestrial lidar; form diversity; morphological plasticity; stochastic functional-structural plant model; quantitative structure models; data fitting
Highlights: We propose a stochastic version of the tree growth model LIGNUM for producing tree structures consistent with detailed terrestrial laser scanning data, and we provide the proof-of-concept by using model-based simulations and real laser scanning data; Trees produced with the data-based model resemble the trees of the dataset, and are statistically similar but not copies of each other; the number of such synthetic trees is not limited.
Abstract | Full text in HTML | Full text in PDF | Author Info

We introduce a general procedure to match a stochastic functional-structural tree model (here LIGNUM augmented with stochastic rules) with real tree structures depicted by quantitative structure models (QSMs) based on terrestrial laser scanning. The matching is done by iteratively finding the maximum correspondence between the measured tree structure and the stochastic choices of the algorithm. First, we analyze the match to synthetic data (generated by the model itself), where the target values of the parameters to be estimated are known in advance, and show that the algorithm converges properly. We then carry out the procedure on real data obtaining a realistic model. We thus conclude that the proposed stochastic structure model (SSM) approach is a viable solution for formulating realistic plant models based on data and accounting for the stochastic influences.

  • Potapov, Tampere University of Technology, Department of Mathematics, P.O. Box 553, FI-33101 Tampere, Finland E-mail: ilya.potapov@tut.fi (email)
  • Järvenpää, Tampere University of Technology, Department of Mathematics, P.O. Box 553, FI-33101 Tampere, Finland E-mail: marko.jarvenpaa@tut.fi
  • Åkerblom, Tampere University of Technology, Department of Mathematics, P.O. Box 553, FI-33101 Tampere, Finland E-mail: markku.akerblom@tut.fi
  • Raumonen, Tampere University of Technology, Department of Mathematics, P.O. Box 553, FI-33101 Tampere, Finland E-mail: pasi.raumonen@tut.fi
  • Kaasalainen, Tampere University of Technology, Department of Mathematics, P.O. Box 553, FI-33101 Tampere, Finland E-mail: mikko.kaasalainen@tut.fi
article id 1406, category Research article
Tatiana V. Stankova. (2015). A dynamic whole-stand growth model, derived from allometric relationships. Silva Fennica vol. 50 no. 1 article id 1406. https://doi.org/10.14214/sf.1406
Keywords: Scots pine; state-space approach; transition function; algebraic difference approach; growth projection; Base-Height-Invariant dummy variable method; even-aged stands
Highlights: A dynamic whole-stand model was derived from simple allometries and biological rationale; The state-space modelling approach was applied, suggesting several novelties to overcome scarcity of longitudinal data; The model consists of a three-dimensional state vector, defined by dominant stand height, stand density and mean stem volume, and three transition functions; It was tested with data from Scots pine plantations.
Abstract | Full text in HTML | Full text in PDF | Author Info

Growth and yield tables are constrained by a standard production regime and the stand-level dynamic models are an attractive alternative for the even-aged monospecific stands. The objective of this study is to derive a parsimonious and biologically sound whole-stand dynamic growth model and to validate its consistency and relevance for prediction of stand growth and yield. The state-space modelling approach was employed, introducing several novelties in comparison with its current usage. The model consists of a three-dimensional state vector, defined by dominant stand height, number of trees per hectare and mean stem volume, and three transition functions. A site index model was incorporated for height growth projection and transition functions for stand density and mean stem volume with respect to dominant height increase were derived from simple allometries and biological rationale. The model was examined with data from 79 permanent sample plots in Scots pine plantations. Nonlinear Seemingly Unrelated Regression was used to account for cross-equation correlations, and the Base-Height-Invariant dummy variable method was employed to estimate dynamic-form equations. Model consistency was validated in terms of accuracy of predictions and applicability to both thinned and unthinned stands. The new dynamic growth model is a parsimonious biometric whole-stand model that simulates the expected stand development for a broad spectrum of potential management alternatives and can be incorporated in a computer program for further use. It may be especially useful for application when a scarcity of longitudinal data prevents the use of more complicated modelling approaches.

  • Stankova, Forest Research Institute of Bulgarian Academy of Sciences, Department of Forest Genetics, Physiology and Plantations, 132 “St. Kliment Ohridski” Blvd., 1756 Sofia, Bulgaria ORCID http://orcid.org/0000-0002-9932-7286 E-mail: tatianastankova@yahoo.com (email)
article id 1393, category Research article
Werner Poschenrieder, Andreas Rais, Jan-Willem G. van de Kuilen, Hans Pretzsch. (2015). Modelling sawn timber volume and strength development at the individual tree level – essential model features by the example of Douglas fir. Silva Fennica vol. 50 no. 1 article id 1393. https://doi.org/10.14214/sf.1393
Keywords: sawing; wood quality modelling; stem structure; grading; sensitivity test; R statistical environment
Highlights: An individual tree timber growth and quality model toolbox was designed; It realistically predicts an increase of bending strength with planting density; Prediction was shown to be based on consideration of essential intrinsic variables; Height‑diameter‑allometry depending on planting density was effective; Consideration of cambial age and knot area ratio was crucial.
Abstract | Full text in HTML | Full text in PDF | Author Info

We designed a streamlined timber growth and quality model that aims at the effect of stand management on the efficiency of wood resource use. Applying the R based module toolbox to experimental plots of Douglas fir (Pseudotsuga menziesii [Mirb.] Franco) we analysed essential model features for reflecting the influence of planting density on board strength. The current version realistically predicted a significant increase of centre board bending strength at tree age 40 with initial stand density. Model performance gained clear advantage from a) parameterisation of height to diameter allometry as dependent on planting density b) consideration of cambial age and cross‑sectional knot area in board strength computation. Crown shape was less decisive. The model produced a significant effect of planting density even after a whole rotation period of 70 years as well as a realistic spectrum of board bending strength.

  • Poschenrieder, Technische Universität München, Chair of Forest Growth and Yield Science, Hans Carl von Carlowitz Platz 2, 85354 Freising, Germany ORCID http://orcid.org/0000-0002-9028-8583 E-mail: Werner.Poschenrieder@lrz.tum.de (email)
  • Rais, Technische Universität München, Chair of Forest Growth and Yield Science, Hans Carl von Carlowitz Platz 2, 85354 Freising, Germany; Technische Universität München, Holzforschung München, Winzererstrasse 45, 80797 Munich, Germany E-mail: Andreas.Rais@hfm.tum.de
  • van de Kuilen, Technische Universität München, Holzforschung München, Winzererstrasse 45, 80797 Munich, Germany E-mail: vandekuilen@hfm.tum.de
  • Pretzsch, Technische Universität München, Chair of Forest Growth and Yield Science, Hans Carl von Carlowitz Platz 2, 85354 Freising, Germany E-mail: Hans.Pretzsch@lrz.tum.de
article id 1384, category Research article
Staffan Berg, Erik Valinger, Torgny Lind, Tommi Suominen, Diana Tuomasjukka. (2015). Comparison of co-existing forestry and reindeer husbandry value chains in northern Sweden. Silva Fennica vol. 50 no. 1 article id 1384. https://doi.org/10.14214/sf.1384
Keywords: carbon sequestration; agroforestry; global warming potential; gross value added; employment; ToSIA
Highlights: Forestry adapted to reindeer husbandry results in: potential economic improvement of reindeer husbandry, potential reduced cuttings in forestry and reduced wood flow to industry, reduced gross value added for forest industry and increased carbon storage in standing forest.
Abstract | Full text in HTML | Full text in PDF | Author Info

Forestry in Malå, northern Sweden, coexists with other land uses. Reindeer husbandry is in the area for centuries and requires large areas of grazing land. Competing land uses may threaten the Malå Sami village. The aim of the study was to evaluate increased consideration in forest management towards 1) reindeer husbandry, 2) nature and 3) a combination of the two. These scenarios were compared with forest management as it was in 2009. Results indicate that all three scenarios lead to a decrease in annual harvesting volumes of 0.2 to 0.4 million m3. Forest industry dominated the economic viability in the area. Forest management adapted to the needs of reindeer husbandry resulted in less potential for yearly harvest, employment and profits from forest industry. On the other hand, it led to an increase in growing stock and consequently the potential for carbon sequestration over time. Indeed the increased sequestration would compensate for all fossil emissions of carbon from the Forest Wood Chain (FWC). The nature scenario had minor effects on economic result and on the emissions of fossil carbon. The combined scenario gave a reduced economic performance for the FWC. A scenario based on forest management accommodating the needs of reindeer husbandry gave the best economic result for the reindeer chain, due to high survival rate of the reindeer. However the economic importance of reindeer husbandry in the region was small compared to the FWC. Results from scenario analysis could serve as a platform for mutual understanding between stakeholders.

  • Berg, Swedish University of Agricultural Sciences (SLU), Department of Forest Ecology and Management, Skogsmarksgränd, SE-90 183 Umeå, Sweden E-mail: staffan.berg@efi.int (email)
  • Valinger, Swedish University of Agricultural Sciences (SLU), Department of Forest Ecology and Management, Skogsmarksgränd, SE-90 183 Umeå, Sweden E-mail: erik.valinger@slu.se
  • Lind, Swedish University of Agricultural Sciences (SLU), Department of Forest Resource Management, Skogsmarksgränd, SE-90 183 Umeå, Sweden E-mail: torgny.lind@slu.se
  • Suominen, European Forest Institute, Sustainability and Climate Change Research Programme, Yliopistokatu 6, FI-80100 Joensuu, Finland E-mail: tommi.suominen@efi.int
  • Tuomasjukka, European Forest Institute, Sustainability and Climate Change Research Programme, Yliopistokatu 6, FI-80100 Joensuu, Finland E-mail: diana.tuomasjukka@efi.int
article id 1341, category Research article
Přemysl Humplík, Petr Čermák, Tomáš Žid. (2016). Electrical impedance tomography for decay diagnostics of Norway spruce (Picea abies): possibilities and opportunities. Silva Fennica vol. 50 no. 1 article id 1341. https://doi.org/10.14214/sf.1341
Keywords: sapwood; heartwood; tomogram; decay proportion; impedance dataset
Highlights: Statistical parameters of EIT datasets with values of electrical resistance of heartwood are possible to employ in refining heartwood rot diagnostics; Sapwood proportion is decreasing as the proportion of decay on the radial cut expands; Using EIT datasets and sapwood proportion, trees with rot can be split into two groups as per proportion of decay: [< 35%] and [> 35%].
Abstract | Full text in HTML | Full text in PDF | Author Info

The paper aimed at testing the potential of refining tree rot diagnostics carried out by means of electrical impedance tomography (EIT). Examined was the use of EIT datasets with electrical resistance values and sapwood proportion determined on the basis of tomograms. Making use of datasets with resistance values in EIT rot diagnostics is not a default method, although datasets stay unaffected by a fixed colour scale and subsequent subjective evaluation unlike tomograms. Tomography measurement was carried out for 27 individuals of Norway spruce (Picea abies [L.] Karst.) in two stands north-east of Brno, Czech Republic. Once felled down, radial cut-outs were sampled at the measurement site and used for localising rot and determining the extent of the area of decay. The results were subsequently compared with tomograms. EIT datasets containing values of electrical resistance found by measuring were statistically processed and compared with the extent of rot area identified within the cuts. Sapwood proportion values were also detected using the tomograms. The baseline assumption that sapwood proportion decreases as the rot area in the radial cut expands was confirmed. In trees with rot percentage to 35% approximately, sapwood proportion was exceeding 30% except one tree. In trees with rot percentage exceeding 35%, sapwood proportion was below 30%. On the basis of interpreted datasets, the trees can be split into three characteristic groups that correspond to the occurrence, extent and nature of the rot.

  • Humplík, Mendel University in Brno, Faculty of Forestry and Wood Technology, Zemědělská 1665/3, 613 00 Brno, Czech Republic E-mail: premysl.humplik@mendelu.cz (email)
  • Čermák, Mendel University in Brno, Faculty of Forestry and Wood Technology, Zemědělská 1665/3, 613 00 Brno, Czech Republic E-mail: petr.cermak@mendelu.cz
  • Žid, Mendel University in Brno, Faculty of Forestry and Wood Technology, Zemědělská 1665/3, 613 00 Brno, Czech Republic E-mail: tomas.zid@mendelu.cz

Category : Review article

article id 1660, category Review article
Lars Rytter, Morten Ingerslev, Antti Kilpeläinen, Piritta Torssonen, Dagnija Lazdina, Magnus Löf, Palle Madsen, Peeter Muiste, Lars-Göran Stener. (2016). Increased forest biomass production in the Nordic and Baltic countries – a review on current and future opportunities. Silva Fennica vol. 50 no. 5 article id 1660. https://doi.org/10.14214/sf.1660
Keywords: fertilization; tree breeding; tree species; coppice; cultivation areas; growth increment; nurse crops
Highlights: Annual growth is 287 million m3 in the forests of the Nordic and Baltic countries; Growth can be increased by new tree species, tree breeding, high-productive management systems, fertilization and afforestation of abandoned agricultural land; We predict a forest growth increment of 50–100% is possible at the stand scale; 65% of annual growth is harvested today.
Abstract | Full text in HTML | Full text in PDF | Author Info

The Nordic and Baltic countries are in the frontline of replacing fossil fuel with renewables. An important question is how forest management of the productive parts of this region can support a sustainable development of our societies in reaching low or carbon neutral conditions by 2050. This may involve a 70% increased consumption of biomass and waste to meet the goals. The present review concludes that a 50–100% increase of forest growth at the stand scale, relative to today’s common level of forest productivity, is a realistic estimate within a stand rotation (~70 years). Change of tree species, including the use of non-native species, tree breeding, introduction of high-productive systems with the opportunity to use nurse crops, fertilization and afforestation are powerful elements in an implementation and utilization of the potential. The productive forests of the Nordic and Baltic countries cover in total 63 million hectares, which corresponds to an average 51% land cover. The annual growth is 287 million m3 and the annual average harvest is 189 million m3 (65% of the growth). A short-term increase of wood-based bioenergy by utilizing more of the growth is estimated to be between 236 and 416 TWh depending on legislative and operational restrictions. Balanced priorities of forest functions and management aims such as nature conservation, biodiversity, recreation, game management, ground water protection etc. all need consideration. We believe that these aims may be combined at the landscape level in ways that do not conflict with the goals of reaching higher forest productivity and biomass production.

  • Rytter, The Forestry Research Institute of Sweden (Skogforsk), Ekebo 2250, SE-26890 Svalöv, Sweden E-mail: lars.rytter@skogforsk.se (email)
  • Ingerslev, Copenhagen University, Department of Geosciences and Natural Resource Management, Rolighedsvej 23, DK-1958, Frederiksberg C, Denmark E-mail: moi@ign.ku.dk
  • Kilpeläinen, Finnish Environment Institute, Joensuu Office, P.O. Box 111, FI-80101 Joensuu, Finland; University of Eastern Finland, Faculty of Science and Forestry, School of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: antti.kilpelainen@ymparisto.fi
  • Torssonen, University of Eastern Finland, Faculty of Science and Forestry, School of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: Piritta.Torssonen@uef.fi
  • Lazdina, Latvian State Forest Research Institute “Silava”, 111 Riga str, Salaspils, LV 2169 Latvia E-mail: Dagnija.Lazdina@silava.lv
  • Löf, Swedish University of Agricultural Sciences, Southern Swedish Forest Research Centre, Box 49 SE-230 53 Alnarp, Sweden E-mail: magnus.lof@slu.se
  • Madsen, Copenhagen University, Department of Geosciences and Natural Resource Management, Rolighedsvej 23, DK-1958, Frederiksberg C, Denmark E-mail: pam@ign.ku.dk
  • Muiste, Estonian University of Life Sciences, Institute of Forestry and Rural Engineering, Dept. Forest Industry, Kreutzwaldi 5, Tartu 51014, Estonia E-mail: Peeter.Muiste@emu.ee
  • Stener, The Forestry Research Institute of Sweden (Skogforsk), Ekebo 2250, SE-26890 Svalöv, Sweden E-mail: Lars-Goran.Stener@skogforsk.se
article id 1416, category Review article
Ulf Sikström, Hannu Hökkä. (2015). Interactions between soil water conditions and forest stands in boreal forests with implications for ditch network maintenance. Silva Fennica vol. 50 no. 1 article id 1416. https://doi.org/10.14214/sf.1416
Keywords: peatland; forest drainage; conifers; tree growth; drainage intensity; ditch deterioration; forest water use; ground-water table; profitability
Highlights: Ditch network maintenance (DNM) may influence soil water conditions less than initial ditching due to reduced hydraulic conductivity of the peat; Stand stocking and management substantially influence soil-water conditions; DNM can lower the GWL and increase tree growth; DNM growth responses of 0.5–1.8 m3 ha–1 yr–1 during 15–20-years in Scots pine peatland stands reported; Greatest need for DNM in the early phase of a stand rotation; Need for better understanding of the link between soil water and tree growth.
Abstract | Full text in HTML | Full text in PDF | Author Info

At sites with either peat or mineral soils in large areas of boreal forests, high soil-water contents hamper tree growth and drainage can significantly increase growth. Hence, areas covering about 15 × 106 ha of northern peatlands and wet mineral soils have been drained for forestry purposes. Usually ditches gradually deteriorate, thus reducing their functionality as drains, and ditch-network maintenance (DNM) might be needed to maintain stand growth rates enabled by the original ditching. This article reviews current knowledge on establishing the need for DNM in boreal forest stands, subsequent growth responses, and the financial outcome of the activity. The issues covered in the review are: (i) ditching, changes in ditches over time and the need for DNM; (ii) interactions between soil water and both stand properties and stand management; (iii) ground-water level (GWL) and tree growth responses to DNM; and (iv) financial viability of DNM. Conclusions about the current understanding of issues related to DNM are drawn and implications for DNM in practice are summarized. Finally, gaps in knowledge are identified and research needs are suggested.

  • Sikström, The Forestry Research Institute of Sweden (Skogforsk), Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: ulf.sikstrom@skogforsk.se (email)
  • Hökkä, Natural Resources Institute Finland (Luke), Management and Production of Renewable Resources, P.O. Box 16, FI-96301 Rovaniemi, Finland E-mail: hannu.hokka@luke.fi

Category : Research note

article id 1674, category Research note
Nevenka Ćelepirović, Monika Karija Vlahović, Aikaterini Dounavi, Mladen Ivanković. (2016). Optimizations of high throughput multiplex polymerase chain reaction with simple sequence repeat markers for genotyping of common walnut populations (Juglans regia L.). Silva Fennica vol. 50 no. 5 article id 1674. https://doi.org/10.14214/sf.1674
Keywords: SSR markers; nuclear microsatellites; Juglans regia L.; multiplex PCR
Highlights: We combined eleven SSR markers in one multiplex PCR to make faster and cost effective amplification of the common walnut DNA from Croatia; Genetic variation of common walnut from Croatia was moderate at analyzed SSR loci; The resultant multiplex PCR could be used for genotyping of common walnut populations.
Abstract | Full text in HTML | Full text in PDF | Author Info

Multiplex polymerase chain reaction (PCR) allows amplification of two or more pair of primers in parallel for amplification of multiple target sequences in a single reaction tube. In this study, we combined existing simple sequence repeat (SSR) markers (nuclear microsatellites) in the novel combination of multiplex PCR to study the population genetics of common walnut from Croatia. From twenty one tested SSR markers, eleven produced satisfactory results in one multiplex PCR. Population genetic results achieved from 15 samples of Croatian common walnut showed moderate genetic variability (average value: He 0.473; Ho 0.568). Our multiplex PCR allowed cost effective work concerning chemicals, plastic ware, device, and working time producing optimal results. The optimized multiplex PCR represented the best combination of eleven SSR primers for genotyping common walnut in a single PCR reaction.

  • Ćelepirović, Division of Genetics, Forest Tree Breeding and Seed Science, Croatian Forest Research Institute, Jastrebarsko, Croatia E-mail: celepirovic.nevenka@gmail.com (email)
  • Karija Vlahović, DNA Laboratory, Department of Forensic Medicine&Criminology, School of Medicine, University of Zagreb, Zagreb, Croatia E-mail: monika.karija.vlahovic@mef.hr
  • Dounavi, Department of Forest Protection, Forest Research Insitute of Baden-Württemberg, Wonnhaldesttr. 4, 79100 Freiburg, Germany E-mail: aikaterini.dounavi@forst.bwl.de
  • Ivanković, Division of Genetics, Forest Tree Breeding and Seed Science, Croatian Forest Research Institute, Jastrebarsko, Croatia E-mail: mladeni@sumins.hr
article id 1661, category Research note
Āris Jansons, Linda Robalte, Roberts Čakšs, Roberts Matisons. (2016). Long-term effect of whole tree biomass harvesting on ground cover vegetation in a dry Scots pine stand. Silva Fennica vol. 50 no. 5 article id 1661. https://doi.org/10.14214/sf.1661
Keywords: Pinus sylvestris; soil disturbance; stand replacement; Latvia; biomass removal; soil scarification
Highlights: After 47 years, whole tree harvesting (WTH) increased richness of ground cover species compared to conventionally managed stands; Higher occurrence of the oligotrophic species after WTH suggested reduction of soil nutrient content, hence formation of different plant community; WTH, apparently, facilitated recovery of species typical for later successional stages.
Abstract | Full text in HTML | Full text in PDF | Author Info

Long-term (47 years) effect of experimental whole tree harvesting (WTH) with a heavy soil scarification on ground cover vegetation was assessed in a dry nutrient-poor Scots pine (Pinus sylvestris L.) stand in Latvia. Neighbouring conventionally managed young (10 years) and mature (119 years) stands of the same type were used for comparison. Higher species richness was observed in the WTH stand compared to conventionally managed young and mature stands (24, 18 and 16 species, respectively), likely due to the profound disturbance. The Shannon diversity index was higher in the young than in the WTH and mature stands (2.36, 1.77 and 1.63, respectively); still, the composition and structure of ground cover vegetation in WTH was more similar to the mature stand. Nevertheless, the occurrence of oligotrophic species in the WTH stand suggested decreased soil nutrient content and potential development of different plant community. Hence, such method might be considered for restoration of oligotrophic stands. Nevertheless, the period of 47 years appeared sufficient for the ground cover vegetation to recover after the WTH.

  • Jansons, Latvian State Forest Research Institute “Silava”, 111 Rigas Str., LV 2169, Salaspils, Latvia E-mail: aris.jansons@silava.lv
  • Robalte, Latvian State Forest Research Institute “Silava”, 111 Rigas Str., LV 2169, Salaspils, Latvia E-mail: robalte.l@gmail.com (email)
  • Čakšs, Latvian State Forest Research Institute “Silava”, 111 Rigas Str., LV 2169, Salaspils, Latvia E-mail: chakijs95@gmail.com
  • Matisons, Latvian State Forest Research Institute “Silava”, 111 Rigas Str., LV 2169, Salaspils, Latvia E-mail: roberts.matisons@silava.lv
article id 1656, category Research note
Līga Puriņa, Roberts Matisons, Āris Jansons, Silva Šēnhofa. (2016). Survival of European beech in the central part of Latvia 33 years since the plantation. Silva Fennica vol. 50 no. 4 article id 1656. https://doi.org/10.14214/sf.1656
Keywords: Fagus sylvatica; introduction experiment; sapling mortality; northeasternmost beech trial
Highlights: Beech saplings growing in the central part of Latvia had ca. 80% survival during the recent three decades; The dimensions of saplings varied greatly likely due to canopy conditions; Some beech self-regeneration was observed; Mainly saplings had narrow crowns; The distribution of sapling dimensions had the reverse-J shape, suggesting successful development of beech.
Abstract | Full text in HTML | Full text in PDF | Author Info

The projections of vegetation zones suggest increasing growth potential of European beech (Fagus sylvatica L.) in Northern Europe. Such changes usually are most apparent in the marginal populations. In this study, survival of young beech growing in an experimental plantation under canopy of a mixed coniferous stand in the central part of Latvia was assessed after 33 years since the establishment. The planting material originated from an older experimental stand in the western part of Latvia. Although, at present, the studied plantation could be considered as the northeasternmost beech stand in Europe, a good survival was observed – ca. 80% of the seedlings have survived, despite several cold spells of ca. –30 °C that occurred during the recent three decades. Additionally, some self-regeneration i.e. branch sprouting was observed. The saplings were rather low, as their mean height was ca. 4 m. Still, some individuals, which were growing under canopy openings, reached considerable dimensions; their height and stem diameter exceeded 10 m and 9 cm, respectively. The distribution of sapling dimensions had the reverse-J shape that is typical for shade tolerant species, indicating normal development of the beech regrowth. The crowns of saplings were narrow and the stems were spindly, suggesting that trees with a good stem quality might be bred. Hence, our results suggest that environmental conditions in the central part of Latvia have been satisfactory for beech, thus encouraging establishment of more extensive trials within the region.

  • Puriņa, LSFRI “Silava”, Rigas str. 111, Salaspils, Latvia, LV2169 E-mail: liga.purina@silava.lv
  • Matisons, LSFRI “Silava”, Rigas str. 111, Salaspils, Latvia, LV2169 E-mail: robism@inbox.lv (email)
  • Jansons, LSFRI “Silava”, Rigas str. 111, Salaspils, Latvia, LV2169 E-mail: aris.jansons@silava.lv
  • Šēnhofa, LSFRI “Silava”, Rigas str. 111, Salaspils, Latvia, LV2169 E-mail: silva.senhofa@silava.lv
article id 1573, category Research note
Marjut Turtiainen, Jari Miina, Kauko Salo, Juha-Pekka Hotanen. (2016). Modelling the coverage and annual variation in bilberry yield in Finland. Silva Fennica vol. 50 no. 4 article id 1573. https://doi.org/10.14214/sf.1573
Keywords: abundance; berry yield; generalised linear mixed model; Vaccinium myrtillus L.
Highlights: The highest bilberry coverage was found in mesic heath forests and fell forests; On peatlands the coverage was, on average, lower than on mineral soil sites; The approach introduced in this study to calculating annual berry yield indices is a promising way for estimating total annual bilberry yields over a given period of time.
Abstract | Full text in HTML | Full text in PDF | Author Info

The coverage of bilberry (Vaccinium myrtillus L.) was modelled as a function of site and stand characteristics using the permanent sample plots of the National Forest Inventory (NFI) (Model 1). The sample sites consisted of mineral soil forests as well as fells and peatland sites. Annual variation in the bilberry yield (Model 2) was analysed based on measurements over 2001–2014 in the permanent sample plots (so-called MASI plots) in various areas of Finland. We derived annual bilberry yield indices from the year effects of Model 2 and investigated whether these indices could be used to estimate annual variation in bilberry crops in Finland. The highest bilberry coverage was found in mesic heath forests and fell forests. On peatlands the coverage was, on average, lower than on mineral soil sites; the peatland sites with most bilberry coverage were meso-oligotrophic and oligotrophic spruce mires and oligotrophic pine mires. Our bilberry yield indices showed similar variation to those derived from the mean annual berry yields reported and calculated earlier using the MASI plots; the correlation between the indices was 0.795. This approach to calculating annual berry yield indices is a promising way for estimating total annual bilberry yields over a given period of time. Models 1 and 2 can be used in conjunction with the Miina et al.’s (2009) bilberry yield model when bilberry coverage, average annual yield and annual variation in the yield are to be predicted in forest planning.

  • Turtiainen, University of Eastern Finland, School of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: marjut.turtiainen@uef.fi (email)
  • Miina, Natural Resources Institute Finland (Luke), Management and Production of Renewable Resources, Box 68, FI-80101 Joensuu, Finland E-mail: jari.miina@luke.fi
  • Salo, Natural Resources Institute Finland (Luke), Bio-based Business and Industry, Box 68, FI-80101 Joensuu, Finland E-mail: kauko.salo@luke.fi
  • Hotanen, Natural Resources Institute Finland (Luke), Management and Production of Renewable Resources, Box 68, FI-80101 Joensuu, Finland E-mail: juha-pekka.hotanen@luke.fi
article id 1549, category Research note
Francesco Chianucci, Luca Salvati, Tessa Giannini, Ugo Chiavetta, Piermaria Corona, Andrea Cutini. (2016). Long-term response to thinning in a beech (Fagus sylvatica L.) coppice stand under conversion to high forest in Central Italy. Silva Fennica vol. 50 no. 3 article id 1549. https://doi.org/10.14214/sf.1549
Keywords: continuous cover forestry; thinning; Leaf Area Index; coppice management; Plant Canopy Analyzer
Highlights: Canopy recovery after medium-heavy thinning reveals the prompt response of beech to intensive thinning cycles; Active management practices accelerate the transition from coppice to high forest.
Abstract | Full text in HTML | Full text in PDF | Author Info

European beech (Fagus sylvatica L.) forests have a long history of coppicing, but the majority of formerly managed coppices are currently under conversion to high forest. The long time required to achieve conversion requires a long-term perspective to fully understand the implication of the applied conversion practices. In this study, we showed results from a long-term (1992–2014) case-study comparing two management options (natural evolution and periodic thinning) in a beech coppice in conversion to high forest. Leaf area index, litter production, radiation transmittance and growth efficiency taken as relevant stand descriptors, were estimated using both direct and indirect optical methods. Overall, results indicated that beech coppice showed positive and prompt responses to active conversion practices based on periodic medium-heavy thinning. A growth efficiency index showed that tree growth increased as the cutting intensity increased. Results from the case study supported the effectiveness of active conversion management from an economic (timber harvesting) and ecological (higher growth efficiency) point of view.

  • Chianucci, Consiglio per la Ricerca in Agricoltura e l’Analisi dell’Economia Agraria – Forestry Research Centre, viale Santa Margherita 80, 52100 Arezzo, Italy ORCID http://orcid.org/0000-0002-5688-2060 E-mail: fchianucci@gmail.com (email)
  • Salvati, Consiglio per la Ricerca in Agricoltura e l’Analisi dell’Economia Agraria – Research Centre for the Soil-Plant System, via della Navicella 2–4, 00184 Roma, Italy E-mail: bayes00@yahoo.it
  • Giannini, Consiglio per la Ricerca in Agricoltura e l’Analisi dell’Economia Agraria – Forestry Research Centre, viale Santa Margherita 80, 52100 Arezzo, Italy E-mail: tessa.giannini@entecra.it
  • Chiavetta, Consiglio per la Ricerca in Agricoltura e l’Analisi dell’Economia Agraria – Forestry Research Centre, viale Santa Margherita 80, 52100 Arezzo, Italy E-mail: ugo.chiavetta@entecra.it
  • Corona, Consiglio per la Ricerca in Agricoltura e l’Analisi dell’Economia Agraria – Forestry Research Centre, viale Santa Margherita 80, 52100 Arezzo, Italy E-mail: piermaria.corona@unitus.it
  • Cutini, Consiglio per la Ricerca in Agricoltura e l’Analisi dell’Economia Agraria – Forestry Research Centre, viale Santa Margherita 80, 52100 Arezzo, Italy E-mail: andrea.cutini@entecra.it
article id 1544, category Research note
Osmo Mattila, Kaisa Hämäläinen, Liina Häyrinen, Sami Berghäll, Katja Lähtinen, Anne Toppinen. (2016). Strategic business networks in the Finnish wood products industry: a case of two small and medium-sized enterprises. Silva Fennica vol. 50 no. 3 article id 1544. https://doi.org/10.14214/sf.1544
Keywords: competitive advantage; wood products; network-based business models
Highlights: Network-based business models are not yet common in the wood products industry; Further research is suggested on network-based co-operation to vitalize industry.
Abstract | Full text in HTML | Full text in PDF | Author Info

The use of network-based business models has been brought up as a means of creating com-petitive edge in the tightening global competition. In practice, adopting network-based models has not yet become common in the wood products industry. The objective of this study is to gain better understanding of types of network-based business models using a case study of two small and medium-sized wood industry companies in Finland (for a sake of anonymity named as A and B). The network of company A is found to consist of mostly of established actors with a new-in-the-market value creation system, whereas network for company B is more stable and has an established value system aiming at growth and incremental innovations. Both networks had experienced difficulties in finding partners and lacked some strategic resources. Via this example we wish to stimulate further research interest on the sources of network-based competitive advantage in the traditional wood product industry in a need of renewal of business models.

  • Mattila, University of Helsinki, Department of Forest Sciences, FI-00014 Helsingin yliopisto, Finland E-mail: osmo.mattila@helsinki.fi
  • Hämäläinen, Siparila Oy, Varaslahdentie 1, FI-40800 Vaajakoski, Finland E-mail: kaisa.hamalainen@siparila.fi
  • Häyrinen, University of Helsinki, Department of Forest Sciences, FI-00014 Helsingin yliopisto, Finland E-mail: liina.hayrinen@helsinki.fi
  • Berghäll, University of Helsinki, Department of Forest Sciences, FI-00014 Helsingin yliopisto, Finland E-mail: sami.berghall@helsinki.fi
  • Lähtinen, University of Helsinki, Department of Forest Sciences, FI-00014 Helsingin yliopisto, Finland E-mail: katja.lahtinen@helsinki.fi
  • Toppinen, University of Helsinki, Department of Forest Sciences, FI-00014 Helsingin yliopisto, Finland E-mail: anne.toppinen@helsinki.fi (email)
article id 1518, category Research note
Francesco Chianucci. (2015). A note on estimating canopy cover from digital cover and hemispherical photography. Silva Fennica vol. 50 no. 1 article id 1518. https://doi.org/10.14214/sf.1518
Keywords: forest canopy; foliage cover; crown cover; fisheye photography; cover photography
Highlights: Comparison of fisheye (DHP) and cover (DCP) photography for estimating canopy cover; Digital photographic estimates validated against artificial images with known cover; Accuracy of cover estimates from DHP is influenced by mean gap size and actual cover; Accuracy of cover estimates from DCP is not influenced by mean gap size and actual cover.
Abstract | Full text in HTML | Full text in PDF | Author Info

Fast and accurate estimates of canopy cover are central for a wide range of forestry studies. As direct measurements are impractical, indirect optical methods have often been used in forestry to estimate canopy cover. In this paper the accuracy of canopy cover estimates from two widely used canopy photographic methods, hemispherical photography (DHP) and cover photography (DCP) was evaluated. Canopy cover was approximated in DHP as the complement of gap fraction data at narrow viewing zenith angle range (0°–15°), which was comparable with that of DCP. The methodology was tested using artificial images with known canopy cover; this allowed exploring the influence of actual canopy cover and mean gap size on canopy cover estimation from photography. DCP provided robust estimates of canopy cover, whose accuracy was not influenced by variation in actual canopy cover and mean gap size, based on comparison with artificial images; by contrast, the accuracy of cover estimates from DHP was influenced by both actual canopy cover and mean gap size, because of the lower ability of DHP to detect small gaps within crown. The results were replicated in both DHP and DCP images collected in real forest canopies. Finally, the influence of canopy cover on foliage clumping index and leaf area index was evaluated using a theoretical gap fraction model. The main findings indicate that DCP can overcome the limits of indirect techniques for obtaining unbiased and precise estimates of canopy cover, which are comparable to those obtainable from direct, more labour-intensive techniques, being therefore highly suitable for routine monitoring and inventory purposes.

  • Chianucci, Consiglio per la Ricerca in Agricoltura e l’Analisi dell’Economia Agraria – Forestry Research Centre, viale Santa Margherita 80, 52100 Arezzo, Italy ORCID http://orcid.org/0000-0002-5688-2060 E-mail: fchianucci@gmail.com (email)
article id 1496, category Research note
Juha Lappi, Jaana Luoranen. (2016). Using a bivariate generalized linear mixed model to analyze the effect of feeding pressure on pine weevil damage. Silva Fennica vol. 50 no. 1 article id 1496. https://doi.org/10.14214/sf.1496
Keywords: measurement error; best linear predictor; correlated random effects; log-log link
Highlights: Probability of damage of treated seedlings can be predicted from the probability of damage of control seedlings (feeding pressure).
Abstract | Full text in HTML | Full text in PDF | Author Info

The objective of the study is to derive a method by which one can analyze how the probability of damage made by pine weevils on seedlings treated with insecticides depends on the probability of damage on untreated control seedlings, called feeding pressure. Because the probabilities vary from stand to stand and from block to block, the analysis is done using a generalized linear mixed model. The dependency of probability of damage on the feeding pressure cannot be properly analyzed using observed relative frequency of damage of control seedlings as a covariate, but it can be analyzed using a bivariate model. One equation describes damage of control seedlings and another equation damage of treated seedlings. The random stand and block effects of different equations are correlated. For a given probability of stand level control seedling damage, the random stand effect for control seedlings can be computed using a link function, then random stand effects for treated seedlings can be predicted using the best linear predictor from the random effect for control seedlings. Using an inverse link the prediction can again be presented in the probability scale which is of interest to the user. Using these three steps the probability of damage of treated seedlings can be predicted from the control damage probability. The probability of damage of treated seedlings can also be predicted from the observed relative frequency of damaged control seedlings using simulation. The complementary log-log link was used for control seedlings and the log-log link for treated seedlings.

  • Lappi, Natural Resources Institute Finland (Luke), Economics and society, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: juha.lappi@luke.fi (email)
  • Luoranen, Natural Resources Institute Finland (Luke), Management and Production of Renewable Resources, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: jaana.luoranen@luke.fi
article id 1443, category Research note
Jouni Partanen, Risto Häkkinen, Heikki Hänninen. (2015). Significance of the root connection on the dormancy release and vegetative bud burst of Norway spruce (Picea abies) seedlings in relation to accumulated chilling. Silva Fennica vol. 50 no. 1 article id 1443. https://doi.org/10.14214/sf.1443
Keywords: phenology; bud burst percentage; days to bud burst; dormancy release; forcing
Highlights: Cutting the root connection slightly increased the number of days to bud burst of Norway spruce seedlings under warm conditions but it had no consistent effect on bud burst percentage; Our results obtained with seedlings suggest that using detached tree material in dormancy release experiments may slightly affect the results but it will evidently not lead to drastically erroneous conclusions.
Abstract | Full text in HTML | Full text in PDF | Author Info

The effect of cutting the root connection by detaching the shoot from the root system on dormancy release and vegetative bud burst was examined in 2-year-old seedlings of Norway spruce (Picea abies [L.] Karst.). Seedlings were transferred at 1–4 week intervals between October and January from outdoor conditions to experimental forcing in a heated greenhouse. Before forcing, half of the seedlings were cut above ground line, and the detached shoots were forced with their cut ends placed in water. The intact seedlings were forced with their root system remaining intact in the pots. Vegetative bud burst was observed visually. Cutting the root connection slightly increased days to bud burst in the forcing conditions, however, no consistent effect on bud burst percentage was found. Our preliminary seedling data suggest that using detached tree material in dormancy release experiments may have a small effect on bud burst date but it will evidently not lead to drastically erroneous conclusions. Further studies, using different seed lots, are needed to assess the effect of detaching on the dormancy release and bud burst, especially in adult trees.

  • Partanen, Natural Resources Institute Finland (Luke), Management and Production of Renewable Resources, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: jouni.partanen@luke.fi (email)
  • Häkkinen, Natural Resources Institute Finland (Luke), Management and Production of Renewable Resources, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: risto.hakkinen@luke.fi
  • Hänninen, University of Helsinki, Department of Biosciences, Viikki Plant Science Centre (ViPS), P.O. Box 65, FI-00014 University of Helsinki, Finland E-mail: heikki.hanninen@helsinki.fi
article id 1346, category Research note
Āris Jansons, Roberts Matisons, Oskars Krišāns, Baiba Džeriņa, Mārtiņš Zeps. (2015). Effect of initial fertilization on 34-year increment and wood properties of Norway spruce in Latvia. Silva Fennica vol. 50 no. 1 article id 1346. https://doi.org/10.14214/sf.1346
Keywords: Picea abies; wood density; proportion of latewood; tree-rings; high-frequency densitometry; legacy effect
Highlights: The initial fertilization increased the productivity of Picea abies increasing stem volume by 17% at the age of 34 years; The tree-ring width was affected for up to15 years; The fertilization did not affect mean tree-ring density, although the latewood density was increased.
Abstract | Full text in HTML | Full text in PDF | Author Info

Initial fertilisation, when the fertilizer is supplied during the plantation, is applied to improve the competitive ability of the seedlings and hence to increase their growth and productivity; however, fertilization could also alter wood properties and timber quality. In this study, the dimensions and tree-ring parameters – width, proportion of latewood, maximum and mean density, mean earlywood and latewood density – of initially fertilized (by 14, 6 and 11 g of N, P and K per seedling, respectively) Norway spruce (Picea abies Karst.) growing in an experimental plantation in Kalsnava, Latvia (temperate climate region) were assessed. The fertilization significantly increased the dimensions of trees in long-term (ca. 17% increase of stemwood volume). The analysis of tree-ring width suggested that the duration of the effect was ca. 15 years. The maximum and latewood density were higher for the fertilized trees only in a few years. The mean and earlywood density of tree-rings were mainly similar for both treatments. Altogether, considering the one-time application of a limited amount of fertilizer, such treatment had notable and lasting effect on Norway spruce.

  • Jansons, LSRFI “Silava”, Rigas str. 111, Salaspils, Latvia, LV2169 E-mail: aris.jansons@silava.lv
  • Matisons, LSRFI “Silava”, Rigas str. 111, Salaspils, Latvia, LV2169 E-mail: robism@inbox.lv (email)
  • Krišāns, LSRFI “Silava”, Rigas str. 111, Salaspils, Latvia, LV2169 E-mail: oskars.krisans@silava.lv
  • Džeriņa, LSRFI “Silava”, Rigas str. 111, Salaspils, Latvia, LV2169 E-mail: baiba.dzerina@silava.lv
  • Zeps, LSRFI “Silava”, Rigas str. 111, Salaspils, Latvia, LV2169 E-mail: martins.zeps@silava.lv

Register
Click this link to register to Silva Fennica.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles