Current issue: 58(4)

Scopus CiteScore 2023: 3.5
Scopus ranking of open access forestry journals: 17th
PlanS compliant
Select issue
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles by Lars-Göran Stener

Category : Research article

article id 10512, category Research article
Mateusz Liziniewicz, Ignacio Barbeito, Andis Zvirgzdins, Lars-Göran Stener, Pentti Niemistö, Nils Fahlvik, Ulf Johansson, Bo Karlsson, Urban Nilsson. (2022). Production of genetically improved silver birch plantations in southern and central Sweden. Silva Fennica vol. 56 no. 1 article id 10512. https://doi.org/10.14214/sf.10512
Keywords: Betula pendula; planting; generalized algebraic difference approach; genetic gain; stand basal area starting function
Highlights: The basal area development of genetically improved birch in Sweden was modeled using a generalized algebraic difference approach; The best model fit, both graphically and statistically was delivered by the Korf base model; The analysis of realized gain trial showed a stability of relative differences in basal area between tested genotypes.
Abstract | Full text in HTML | Full text in PDF | Author Info

Investing in planting genetically improved silver birch (Betula pendula Roth) in Swedish plantations requires understanding how birch stands will develop over their entire rotation. Previous studies have indicated relatively low production of birch compared to Norway spruce (Picea abies (L.) Karst.) and Scots pine (Pinus sylvestris L.). This could result from using unrepresentative basic data, collected from unimproved, naturally-regenerated birch (Betula spp.) growing on inventory plots often located in coniferous stands. The objective of this study was to develop a basal area development function of improved silver birch and evaluate production over a full rotation period. We used data from 52 experiments including planted silver birch of different genetic breeding levels in southern and central Sweden. The experimental plots were established on fertile forest sites and on former agricultural lands, and were managed with different numbers of thinnings and basal area removal regimes. The model best describing total stand basal area development was a dynamic equation derived from the Korf base model. The analysis of the realized gain trial for birch showed a good stability of the early calculated relative differences in basal area between tested genotypes over time. Thus, the relative difference in basal area might be with cautious used as representation of the realized genetic gain. On average forest sites in southern Sweden, improved and planted silver birch could produce between 6–10.5 m3 ha–1 year–1, while on fertile agriculture land the average productivity might be higher, especially with material coming from the improvement program. The performed analysis provided a first step toward predicting the effects of genetic improvement on total volume production and profitability of silver birch. However, more experiments are needed to set up the relative differences between different improved material.

  • Liziniewicz, The Forestry Research Institute of Sweden, Ekebo, SE-268 90 Svalöv, Sweden E-mail: mateusz.liziniewicz@skogforsk.se
  • Barbeito, Southern Swedish Forest Research Centre, Swedish University of Agricultural Sciences, Alnarp, Sweden; Université de Lorraine, AgroParisTech, INRAE, UMR Silva, Nancy, France E-mail: ignacio.barbeito@slu.se
  • Zvirgzdins, Southern Swedish Forest Research Centre, Swedish University of Agricultural Sciences, Box 49, 23053 Alnarp, Sweden E-mail: andis.zvirgzdins@slu.se (email)
  • Stener, The Forestry Research Institute of Sweden, Ekebo, SE-268 90 Svalöv, Sweden E-mail: lg.stener@telia.com
  • Niemistö, Natural Resources In-stitute Finland (Luke), Natural resources, Seinäjoki, Finland E-mail: pentti.niemisto@luke.fi
  • Fahlvik, The Forestry Research Institute of Sweden, Ekebo, SE-268 90 Svalöv, Sweden E-mail: nils.fahlvik@skogforsk.se
  • Johansson, Tönnersjöheden Experimental Forest, SLU, Simlångsdalen, Sweden E-mail: ulf.johansson@slu.se
  • Karlsson, The Forestry Research Institute of Sweden, Ekebo, SE-268 90 Svalöv, Sweden E-mail: curly.birch@gmail.com
  • Nilsson, Southern Swedish Forest Research Centre, Swedish University of Agricultural Sciences, Box 49, 23053 Alnarp, Sweden E-mail: urban.nilsson@slu.se
article id 9996, category Research article
Mulualem Tigabu, Mostafa Farhadi, Lars-Göran Stener, Per C. Odén. (2018). Visible + Near Infrared Spectroscopy as taxonomic tool for identifying birch species. Silva Fennica vol. 52 no. 4 article id 9996. https://doi.org/10.14214/sf.9996
Keywords: Betula; silver birch; downy birch; seeds; NIRS; OPLS; multivariate modelling
Highlights: Multivariate modelling of visible + near infrared (NIR) reflectance spectra of single seeds distinguished Betula pubescens and B. pendula with 100% and 99% accuracy, respectively; The results demonstrate the feasibility of NIR spectroscopy as taxonomic tool for classification of species that have morphological resemblance.
Abstract | Full text in HTML | Full text in PDF | Author Info

The genus Betula L. is composed of several species, which are difficult to distinguish in the field on the basis of morphological traits. The aim of this study was to evaluate the taxonomic importance of using visible + near infrared (Vis + NIR) spectra of single seeds for differentiating Betula pendula Roth and Betula pubescens Ehrh. Seeds from several families (controlled crossings of known parent trees) of each species were used and Vis + NIR reflectance spectra were obtained from single seeds. Multivariate discriminant models were developed by Orthogonal Projections to Latent Structures – Discriminant Analysis (OPLS-DA). The OPLS-DA model fitted on Vis + NIR spectra recognized B. pubescens with 100% classification accuracy while the prediction accuracy of class membership for B. pendula was 99%. However, the discriminant models fitted on NIR spectra alone resulted in 100% classification accuracies for both species. Absorption bands accounted for distinguishing between birch species were attributed to differences in color and chemical composition, presumably polysaccharides, proteins and fatty acids, of the seeds. In conclusion, the results demonstrate the feasibility of NIR spectroscopy as taxonomic tool for classification of species that have morphological resemblance.

  • Tigabu, Swedish University of Agricultural Sciences, Southern Swedish Forest Research Centre, Box 49, SE-230 52 Alnarp, Sweden E-mail: mulualem.tigabu@slu.se (email)
  • Farhadi, Swedish University of Agricultural Sciences, Southern Swedish Forest Research Centre, Box 49, SE-230 52 Alnarp, Sweden E-mail: mostafa.farhadi@gmail.com
  • Stener, The Forestry Research Institute of Sweden, Ekebo 2250, SE-268 90 Svalöv, Sweden E-mail: lars-goran.stener@skogforsk.se
  • Odén, Swedish University of Agricultural Sciences, Southern Swedish Forest Research Centre, Box 49, SE-230 52 Alnarp, Sweden E-mail: per.christer.oden@slu.se
article id 5656, category Research article
Lars-Göran Stener, Johan Westin. (2017). Early growth and phenology of hybrid aspen and poplar in clonal field tests in Scandinavia. Silva Fennica vol. 51 no. 3 article id 5656. https://doi.org/10.14214/sf.5656
Keywords: survival; Populus; Sweden; early test; shoot phenology; Denmark
Highlights: Growth and survival was in general higher for hybrid aspen than for poplar; The poor performance of poplar was likely due to poor climatic adaptation or to high soil acidity; The genetic results indicate good possibilities for effective clonal selection; The results support current recommendations for utilization of selected hybrid aspen and poplar regeneration material in Sweden.
Abstract | Full text in HTML | Full text in PDF | Author Info

Results on early survival, growth and shoot phenology of hybrid aspen (Populus tremula L. × P. tremuloides Michx.) and poplar clones (P. trichocarpa Torr. & A. Gray, P. balsamifera L., P. maximowiczii A. Henry and their hybrids) in 13 Scandinavian field trials are presented. The trials were established on forest land (7 sites) or former agricultural land (6 sites) within the latitude range of 56° to 65° N and were assessed 3–4 years after establishment. The main aim was to evaluate phenotypic and genetic differences related to early survival, growth and phenology for hybrid aspen and poplar for different site types and latitudes. Growth and survival was generally higher for hybrid aspen than poplar at all sites. The poor performance of poplar compared to hybrid aspen is likely due to climatic maladaptation or high soil acidity. The early growth performance of the species need to be confirmed at a higher age. The genetic variation and genetic control for growth, phenology and survival was in general intermediate to large indicating good possibilities for effective clonal selection. The genetic site x site correlations (rGE) for growth were for hybrid aspen mostly strong, indicating a weak genotype by environment interaction, while rGE were inconsistent for poplars.The result suggests that southern Sweden can be treated as a single test and utilization zone and in northern Sweden the region along the coast may be another zone. It is too early to make any corresponding conclusions for poplar. In addition, the result backs up the current recommendations for utilization of selected hybrid aspen and poplar regeneration material in Sweden.

  • Stener, The Forestry Research Institute of Sweden, Ekebo 2250, 268 90 Svalöv, Sweden E-mail: lars-goran.stener@skogforsk.se (email)
  • Westin, The Forestry Research Institute of Sweden, Box 3, 918 21 Sävar, Sweden E-mail: johan.westin@skogforsk.se
article id 1713, category Research article
Lars-Göran Stener, Lars Rytter, Gunnar Jansson. (2017). Effects of pruning on wood properties of planted silver birch in southern Sweden. Silva Fennica vol. 51 no. 2 article id 1713. https://doi.org/10.14214/sf.1713
Keywords: wood defects; discolouration; rot; ingrown bark
Highlights: Pruning silver birch trees increased the production of defect-free wood outside the knots; Most wood defects were found inside the knots; Pruned birch trees provide butt logs with higher value than unpruned trees.
Abstract | Full text in HTML | Full text in PDF | Author Info

Pruning was performed at midsummer in two genetically homogenous and managed planted silver birch stands in southern Sweden – one aged 9 and one aged 10 years. Wood defects were analysed 10 years thereafter, using the five uppermost twigs of the stems up to a height of 30 dm. The number of trees examined at each site was around 70, of which half were pruned. The main findings were that: a) compared to unpruned trees, pruned trees produced more defect-free wood outside the knots; b) most wood defects were found inside the knots; and c) wood defects like rot and bark ingrowth were similar for pruned and unpruned trees, while discolouration was marginally higher for pruned trees inside knots but similar outside knots. Overall, the results confirm previous findings that pruned birch trees will provide butt logs with higher value than unpruned trees.

  • Stener, The Forestry Research Institute of Sweden, Ekebo 2250, 268 90 Svalöv, Sweden E-mail: lars-goran.stener@skogforsk.se (email)
  • Rytter, The Forestry Research Institute of Sweden, Ekebo 2250, 268 90 Svalöv, Sweden E-mail: lars.rytter@skogforsk.se
  • Jansson, The Forestry Research Institute of Sweden, Uppsala Science Park, 751 83 Uppsala, Sweden E-mail: gunnar.jansson@skogforsk.se
article id 491, category Research article
Lars Rytter, Lars-Göran Stener. (2003). Clonal variation in nutrient content in woody biomass of hybrid aspen (Populus tremula L. x P. tremuloides Michx.). Silva Fennica vol. 37 no. 3 article id 491. https://doi.org/10.14214/sf.491
Keywords: growth; branches; genetic correlations; heritability; nutrient concentration; nutrient removal; stems
Abstract | View details | Full text in PDF | Author Info
Differences in the nutrient concentrations and nutrient amounts of stems and branches amongst clones of hybrid aspen (Populus tremula L. x P. tremuloides Michx.) were investigated. Seven clones with superior and seven with medium growth rates were selected from a test of 119 clones in southern Sweden. Four trees per clone were randomly identified and harvested in dormant conditions. Sample discs from the stems and branches were collected and analysed for N, K, P, Ca, Mg, and S concentrations, as well as wood density. The analyses revealed significant genetic differences in wood density, K, P, and Mg concentrations in the stems. There were weak (non-significant) and negative genetic correlations between stem volume and concentrations of all the nutrients, except potassium, suggesting that nutrient-efficient clones could be selected without significantly sacrificing genetic gain for growth. In the branches K, Ca, and Mg concentrations differed significantly among clones. After selecting more nutrient efficient clones, the potential savings of nutrients compared with current hybrid aspen material was estimated to be around 5%, which seems fairly low, at least in a short-term perspective. However, the use of clones with different nutrient storage strategies may be regarded as a possible way in the long run to save nutrients in hybrid aspen ecosystems, or of removing them when sludge is applied.
  • Rytter, Forestry Research Institute of Sweden, Skogforsk, Ekebo 2250, SE-26890, Svalöv, Sweden E-mail: lars.rytter@skogforsk.se (email)
  • Stener, Forestry Research Institute of Sweden, Skogforsk, Ekebo 2250, SE-26890, Svalöv, Sweden E-mail: lgs@nn.se

Category : Review article

article id 1660, category Review article
Lars Rytter, Morten Ingerslev, Antti Kilpeläinen, Piritta Torssonen, Dagnija Lazdina, Magnus Löf, Palle Madsen, Peeter Muiste, Lars-Göran Stener. (2016). Increased forest biomass production in the Nordic and Baltic countries – a review on current and future opportunities. Silva Fennica vol. 50 no. 5 article id 1660. https://doi.org/10.14214/sf.1660
Keywords: fertilization; tree breeding; tree species; coppice; cultivation areas; growth increment; nurse crops
Highlights: Annual growth is 287 million m3 in the forests of the Nordic and Baltic countries; Growth can be increased by new tree species, tree breeding, high-productive management systems, fertilization and afforestation of abandoned agricultural land; We predict a forest growth increment of 50–100% is possible at the stand scale; 65% of annual growth is harvested today.
Abstract | Full text in HTML | Full text in PDF | Author Info

The Nordic and Baltic countries are in the frontline of replacing fossil fuel with renewables. An important question is how forest management of the productive parts of this region can support a sustainable development of our societies in reaching low or carbon neutral conditions by 2050. This may involve a 70% increased consumption of biomass and waste to meet the goals. The present review concludes that a 50–100% increase of forest growth at the stand scale, relative to today’s common level of forest productivity, is a realistic estimate within a stand rotation (~70 years). Change of tree species, including the use of non-native species, tree breeding, introduction of high-productive systems with the opportunity to use nurse crops, fertilization and afforestation are powerful elements in an implementation and utilization of the potential. The productive forests of the Nordic and Baltic countries cover in total 63 million hectares, which corresponds to an average 51% land cover. The annual growth is 287 million m3 and the annual average harvest is 189 million m3 (65% of the growth). A short-term increase of wood-based bioenergy by utilizing more of the growth is estimated to be between 236 and 416 TWh depending on legislative and operational restrictions. Balanced priorities of forest functions and management aims such as nature conservation, biodiversity, recreation, game management, ground water protection etc. all need consideration. We believe that these aims may be combined at the landscape level in ways that do not conflict with the goals of reaching higher forest productivity and biomass production.

  • Rytter, The Forestry Research Institute of Sweden (Skogforsk), Ekebo 2250, SE-26890 Svalöv, Sweden E-mail: lars.rytter@skogforsk.se (email)
  • Ingerslev, Copenhagen University, Department of Geosciences and Natural Resource Management, Rolighedsvej 23, DK-1958, Frederiksberg C, Denmark E-mail: moi@ign.ku.dk
  • Kilpeläinen, Finnish Environment Institute, Joensuu Office, P.O. Box 111, FI-80101 Joensuu, Finland; University of Eastern Finland, Faculty of Science and Forestry, School of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: antti.kilpelainen@ymparisto.fi
  • Torssonen, University of Eastern Finland, Faculty of Science and Forestry, School of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: Piritta.Torssonen@uef.fi
  • Lazdina, Latvian State Forest Research Institute “Silava”, 111 Riga str, Salaspils, LV 2169 Latvia E-mail: Dagnija.Lazdina@silava.lv
  • Löf, Swedish University of Agricultural Sciences, Southern Swedish Forest Research Centre, Box 49 SE-230 53 Alnarp, Sweden E-mail: magnus.lof@slu.se
  • Madsen, Copenhagen University, Department of Geosciences and Natural Resource Management, Rolighedsvej 23, DK-1958, Frederiksberg C, Denmark E-mail: pam@ign.ku.dk
  • Muiste, Estonian University of Life Sciences, Institute of Forestry and Rural Engineering, Dept. Forest Industry, Kreutzwaldi 5, Tartu 51014, Estonia E-mail: Peeter.Muiste@emu.ee
  • Stener, The Forestry Research Institute of Sweden (Skogforsk), Ekebo 2250, SE-26890 Svalöv, Sweden E-mail: Lars-Goran.Stener@skogforsk.se

Register
Click this link to register to Silva Fennica.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles