Current issue: 58(4)

Scopus CiteScore 2023: 3.5
Scopus ranking of open access forestry journals: 17th
PlanS compliant
Select issue
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles containing the keyword 'fibre'

Category : Article

article id 5275, category Article
Pirkko Velling, Gérard Nepveu. (1986). Männyn puuaineen laadun ja tuotoksen vaihtelu suomalaisessa provenienssikoesarjassa. Silva Fennica vol. 20 no. 3 article id 5275. https://doi.org/10.14214/sf.a15454
English title: Variation of wood quality and yield in a Finnish series of provenance trials on Scots pine.
Original keywords: mänty; kasvupaikka; alkuperä; puuaineen tiheys; maantieteellinen vaihtelu; kuitusaanto
English keywords: Pinus sylvestris; Scots pine; wood density; geographical variation; increment cores; fibre yield
Abstract | View details | Full text in PDF | Author Info

The purpose of the study was to determine the effects of the origin of seeds and the location of cultivation of Scots pine (Pinus sylvestris L.) on certain properties particularly important to the pulp industry. The research material consisted of six parallel trials of the same 12 provenances. Increment cores were taken of a total of 1,267 sample trees, 19 years old. The location of the trial site generally affected the properties to a larger extent than the origin of the seed. The effect of the variation of wood density and fibre yield on the cultivation values of the provenances was only a few percentages on average, however, at most the effect was nearly 10%. Eastern Finnish provenances adapted well to western Finnish conditions.

The PDF includes an abstract in Finnish and French.

  • Velling, E-mail: pv@mm.unknown (email)
  • Nepveu, E-mail: gn@mm.unknown
article id 5166, category Article
Rihko Haarlaa, Matti Kärkkäinen. (1982). Tervalepän kuitujen pituus. Silva Fennica vol. 16 no. 4 article id 5166. https://doi.org/10.14214/sf.a15081
English title: Fibre length in common alder.
Original keywords: kuitupuu; tervaleppä; puun anatomia; kuidut
English keywords: fibre length; Alnus glutinosa; pulpwood; fibres
Abstract | View details | Full text in PDF | Author Info

A material consisting of 21 common alder (Alnus glutinosa (L.) Gaertn.) trees from 11 stands was collected. From each stem discs were sawn by 2 m interval. Samples were taken of the discs from various distances from pith. They were macerated and the average fibre length was based on 50 observations.

The fibre length increased significantly from the pith to the disc surface. The increase was approximately similar at various heights of the tree. The tree characteristics had only minor effect. However, near the pith the increase in fibre length was higher in trees with wide growth rings than in other trees. Near the disc surface the growth rate had no effect. In typical pulpwood bolts the average length was 800–950 μm which corresponds well to the data given in the literature.

The PDF includes a summary in English.

  • Haarlaa, E-mail: rh@mm.unknown (email)
  • Kärkkäinen, E-mail: mk@mm.unknown
article id 5155, category Article
K. M. Bhat, Matti Kärkkäinen. (1982). Wood anatomy and physical properties of the wood and bark in Betula nana growing in Finland. Silva Fennica vol. 16 no. 1 article id 5155. https://doi.org/10.14214/sf.a15070
Keywords: Betula nana; bark; basic density; wood anatomy; growth rings; vessels; fibres
Abstract | View details | Full text in PDF | Author Info

Eighty Betula nana samples were collected from three swamp sites. In the butt portion of the dwarf shrub the average number of growth rings was 12 and the average diameter of the sprouts 6 mm. The basic density of wood was 457 kg/m3 and that of bark 544 kg/m3. The proportion of bark was 32–38% of weight or volume. The vessel elements and fibres were short and their diameter small. The proportion of vessels was 15%, that of fibres 70% and that of rays 15%.

The PDF includes a summary in Finnish.

  • Bhat, E-mail: kb@mm.unknown (email)
  • Kärkkäinen, E-mail: mk@mm.unknown
article id 5096, category Article
K. M. Bhat, Matti Kärkkäinen. (1981). Variation in structure and selected properties of Finnish birch wood. IV. Silva Fennica vol. 15 no. 1 article id 5096. https://doi.org/10.14214/sf.a15037
Keywords: Betula pendula; Betula pubescens; branches; wood anatomy; roots; stem; vessels; fibres
Abstract | View details | Full text in PDF | Author Info

Length variation of fibres and vessels was studied in the branches, stems and roots of Betula pendula Roth and B. pubescense Ehrh. The cells were significantly shorter in the branches and roots than in the stems. There was no significant difference in the cell length between the upper and lower radii of the branches and roots. The length increased from the pith to the surface and decreased in the branches and stems from the base onwards. In the roots the length increased in that direction. The differences between the tree species were small although the cells of B. pubescens were a little longer.

The PDF includes a summary in Finnish.

  • Bhat, E-mail: kb@mm.unknown (email)
  • Kärkkäinen, E-mail: mk@mm.unknown

Category : Research article

article id 1694, category Research article
Katri Luostarinen, Katja Hakkarainen, Henri Kaksonen. (2017). Wood anatomy of seed and basal bud originated downy birches (Betula pubescens Ehrh.) grown at four different sites. Silva Fennica vol. 51 no. 1 article id 1694. https://doi.org/10.14214/sf.1694
Keywords: fibre; xylem; parenchyma; ray; vessel; sprout; wood structure
Highlights: Young xylem of sprouts did not clearly show more mature characteristics than that of seedlings; Marked differences in xylem structure could be observed between growing sites.
Abstract | Full text in HTML | Full text in PDF | Author Info

In trees, xylem must fulfil three important tasks: conducting water to leaves, storing nutrients and water, and supporting the trunk. The origin of the trunk, i.e., seed or basal bud that forms sprouts, and the growth site may affect xylem anatomy, differences of which can affect successful growth of trees. Both seedlings and sprouts of downy birch (Betula pubescens Ehrh.) from four different growth sites with two different soil media, peat and mineral soil, were studied. The diameter of fibres and vessels and the thickness of the double fibre wall were measured, and the number of vessels, rays and axial parenchyma cells was counted. The fibre wall:lumen ratio, vessel percentage area and vessel size:number ratio were calculated. Xylem from sprouts showed only occasionally more mature characteristics than that of seedlings. The number of rays was similar at all four sites, but differences were observed in all other studied characteristics between sites, particularly if soil type was different. The vessel size and number correlated with the number of axial parenchyma cells in juvenile wood, which emphasises the importance of their connections with storage cells particularly at this stage of growth. Good water conductivity was connected with weaker wood, particularly in maturing wood.

  • Luostarinen, School of Forest Sciences, University of Eastern Finland, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: katri.luostarinen@uef.fi (email)
  • Hakkarainen, Natural Resources Institute of Finland (Luke), Yliopistokatu 6, FI-80100 Joensuu, Finland E-mail: katjahak@gmail.com
  • Kaksonen, School of Forest Sciences, University of Eastern Finland, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: hkaksone@gmail.com
article id 938, category Research article
Lars Karlsson, Tommy Mörling, Urban Bergsten. (2013). Influence of silvicultural regimes on the volume and proportion of juvenile and mature wood in boreal Scots pine. Silva Fennica vol. 47 no. 4 article id 938. https://doi.org/10.14214/sf.938
Keywords: fibre length; stand density; juvenile wood
Highlights: Initial stand densities have a large impact on the proportion of mature wood within trees throughout most of their life cycle; The difference between regimes in volume of long fibres in crop trees could be substantial; Long-term silvicultural strategies implemented at juvenile stand ages can be important tools in order to produce wood raw material suited for specific end-uses.
Abstract | Full text in HTML | Full text in PDF | Author Info
Trees from 48 to 78 years old, exposed to three different long-term silvicultural regimes, were examined for transition ages between juvenile (JW), transition (TW) and mature wood (MW), total wood volume and proportions of the same wood types, as defined by fibre length. Twenty one sample trees were collected at sites with similar growing conditions within the same geographical area. Stem discs and fibre samples from breast height (BRH), 20% of tree height, green crown height and 70% of tree height were analysed. Trees growing in an environment with few neighboring trees (Sparse regime) started to produce MW, on average, five years later at BRH and six to nine years later at 20% of total tree height than trees in stands with high stem numbers (Dense regime) and trees growing in stands where the stem number had been heavily reduced after an initial high stand density (Dense/Sparse regime). For all regimes, the greatest mean fibre length was found below the green crown and high initial stem numbers were found to positively influence fibre length. The proportion of MW in the whole stem was 34% at Sparse regime sites, 57–69% at Dense/Sparse sites and 63–64% in sites where there was a Dense regime. The proportion of MW was significantly lower for trees from the Sparse regime on each stem section compared. In conclusion, the results suggest that the initial condition a tree faces affects the stem wood properties and quality output at the end of the rotation period.
  • Karlsson, Department of Forest Biomaterials and Technology, Swedish University of Agricultural Sciences, SE-901 83 Umeå, Sweden E-mail: lars.karlsson@slu.se (email)
  • Mörling, Department of Forest Ecology and Management, Swedish University of Agricultural Sciences, SE-901 83 Umeå, Sweden E-mail: tommy.morling@slu.se
  • Bergsten, Department of Forest Biomaterials and Technology, Swedish University of Agricultural Sciences, SE-901 83 Umeå, Sweden E-mail: urban.bergsten@slu.se
article id 921, category Research article
Katri Luostarinen. (2012). Tracheid wall thickness and lumen diameter in different axial and radial locations in cultivated Larix sibirica trunks. Silva Fennica vol. 46 no. 5 article id 921. https://doi.org/10.14214/sf.921
Keywords: wood; earlywood; latewood; fibre; Siberian larch; xylem
Abstract | View details | Full text in PDF | Author Info
In Larix trunks the properties of wood differ clearly radially, but the axial differences are smaller as well as being less studied. Wood anatomy is in particular poorly studied, even though all other wood properties derive from cell and tissue structure. The aim of this study was to chart variation in tracheid size (double wall thickness (2CWT), diameter of lumen (RD)) within fast grown cultivated Siberian larch (Larix sibirica Ledeb.) trunks. The differences in 2CWT and RD were clear between earlywood (EW) and latewood (LW), 2CWT increasing clearly less in EW than in LW towards the bark, while RD stayed quite stable in LW but in EW increased markedly towards the bark. The difference in 2CWT between EW and LW increased towards the upper trunk. In conclusion, the radial variation in RD and 2CWT was different between the butt and other studied heights. As the difference in 2CWT between EW and LW was smaller at the butt than the upper portion of the trunk, the wood was the most homogenous at the butt.
  • Luostarinen, University of Eastern Finland, School of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: katri.luostarinen@uef.fi (email)
article id 202, category Research article
Tuula Nuutinen, Antti Kilpeläinen, Hannu Hirvelä, Kari Härkönen, Veli-Pekka Ikonen, Reetta Lempinen, Heli Peltola, Lars Wilhelmsson, Seppo Kellomäki. (2009). Future wood and fibre sources – case North Karelia in eastern Finland. Silva Fennica vol. 43 no. 3 article id 202. https://doi.org/10.14214/sf.202
Keywords: National Forest Inventory; fibre length; wood density; proportion of latewood; forest scenario analysis
Abstract | View details | Full text in PDF | Author Info
Information on the potential wood supply is important for the wood industry. In this study, the future development of growing stock, cutting potential and wood properties corresponding to the regional scenario of North Karelian Forest Programme 2006–2010 was analysed. The simulations were performed by employing the Finnish MELA system together with the sample plot and tree data of the 9th Finnish National Forest Inventory (NFI9) as initial data for the simulations. Disc-based models for basic wood density, proportion of latewood and fibre length of Norway spruce and Scots pine in Sweden were calibrated and integrated into the MELA system. The wood properties at breast height of both harvested and standing trees were analysed in different strata (age, site type and cutting method) during the scenario period of 50 years (2002–2052). The average wood properties within the same strata varied only slightly over time. However, the results for different strata differed considerably. In general, wood density, fibre length and proportion of latewood increased, on average, as a function of tree age and along with a decrease in site fertility (excl. wood density and proportion of latewood in harvested Norway spruce in the first case and fibre length in the latter case for both species). For trees less than 80 years, properties in harvested trees were equal to or slightly greater than those of standing trees. The values for clear-cuttings were greater or equal to those of thinnings (excl. wood density and proportion of latewood in Norway spruce). The study demonstrates the value of model-based analyses utilising NFI tree measurements in regions that are considered to be sources of raw material.
  • Nuutinen, European Forest Institute, Torikatu 34, FI-80100 Joensuu, Finland E-mail: tuula.nuutinen@efi.int (email)
  • Kilpeläinen, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: ak@nn.fi
  • Hirvelä, Finnish Forest Research Institute, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: hh@nn.fi
  • Härkönen, Finnish Forest Research Institute, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: kh@nn.fi
  • Ikonen, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: vpi@nn.fi
  • Lempinen, Finnish Forest Research Institute, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: rl@nn.fi
  • Peltola, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: hp@nn.fi
  • Wilhelmsson, Skogforsk, Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: lw@nn.fi
  • Kellomäki, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: sk@nn.fi
article id 194, category Research article
Ane Zubizarreta Gerendiain, Heli Peltola, Pertti Pulkkinen. (2009). Growth and wood property traits in narrow crowned Norway spruce (Picea abies f. pendula) clones grown in southern Finland. Silva Fennica vol. 43 no. 3 article id 194. https://doi.org/10.14214/sf.194
Keywords: fibre length; stem volume; height; diameter; wood density; earlywood; latewood
Abstract | View details | Full text in PDF | Author Info
We investigated the growth, yield, wood density traits and fibre properties in 13 narrow crowned Norway spruce (Picea abies f. pendula) clones grown at a spacing of 2 m x 1.5 m (about 3300 seedlings/ha) in a field trial established in 1988 in southern Finland on a forest soil. For comparison, we used 3 normal crowned Norway spruce (Picea abies (L.) Karst.) genetic entries grown as a mixture in the same trial representing southern Finnish breeding regions. We found that wood density traits and fibre properties showed, on average, lower phenotypic variation than growth and yield traits regardless of crown type. Narrow crowned clones also had, on average, lower stem volume and fibre length, but higher overall wood density. More over, the phenotypic correlations between studied growth and wood properties ranged, on average, from moderate (normal crown) to high (narrow crown). These results were opposite to previous findings for narrow and normal crowned genetic entries grown in narrower spacing (1 m x 1 m) in southern Finland. Thus, this indicates lower plasticity of narrow crowned clones to the increasing growing space compared to normal crowned ones, so, they should be grown at denser spacing in order to fully utilise its space efficiency capacity. However, this field trial was established as a mixture of normal and narrow crown trees, so that 90% of genetic entries were narrow crowned ones, and therefore the crown competition would be much higher for normal crowned trees when the whole trial would consist of that entry alone. In the latter case, we could expect significantly lower productivity of normal crowned genetic entries with this spacing.
  • Zubizarreta Gerendiain, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: ane.zubizarreta@joensuu.fi (email)
  • Peltola, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: hp@nn.fi
  • Pulkkinen, Finnish Forest Research Institute, Haapastensyrjä Breeding Station, FI-12600 Läyliäinen, Finland E-mail: pp@nn.fi
article id 193, category Research article
Jaume Gort, Ane Zubizarreta Gerendiain, Heli Peltola, Pertti Pulkkinen, Johanna Routa, Raimo Jaatinen. (2009). Differences in fibre properties in Scots pine (Pinus sylvestris L.) genetic entries grown at different spacing and sites. Silva Fennica vol. 43 no. 3 article id 193. https://doi.org/10.14214/sf.193
Keywords: fibre length; fibre width; genetic entry; growth; wood density; coarseness; spacing
Abstract | View details | Full text in PDF | Author Info
In forest breeding, stem volume growth and sawn timber quality indicators have been used as the most important selection traits for Scots pine, whereas less attention has been given to characteristics such as fibre properties. In the above context, we investigated the differences in fibre properties (i.e. fibre length, fibre width and coarseness) in 20 year old Scots pine (Pinus sylvestris L.) genetic entries as affected by spacing and site, but also the phenotypic correlations between fibre properties, yield and wood density. The study was based on materials harvested from 10 genetic entries grown in a spacing trial (site 1) in central Finland, with a current stand density of 2000 (spacing 1), 2000–2500 (spacing 2) and 4000 trees/ha (spacing 3). In order to study the effects of site, we harvested additional material (4 of 7 genetic entries same as on site 1) from a trial located in southern Finland with a corresponding stand density of 2000 trees/ha (site 2). On site 1, spacing 1 and 3, all average values for analysed fibre properties were similar. In spacing 2 average values were slightly higher. On site 2, the average values for different fibre properties were similar compared to the corresponding spacing 1 on site 1. Spacing affected (p < 0.05) all average fibre properties on site 1; as did also site, when comparing same genetic entries grown on both sites. Regardless of spacing and site, the phenotypic correlations between average fibre length, fibre width and coarseness showed, on average, moderate to strong correlation (p < 0.05). Fibre width showed, in general, low and positive phenotypic correlation with diameter at breast height, stem volume and wood density on site 1. However, as a whole, the ranking of genetic entries changed depending on the trait and spacing considered. Thus, no overall ranking between genetic entries was possible.
  • Gort, University of Joensuu, Faculty of Forest Sciences, FI-80101 Joensuu, Finland E-mail: jaume.gort@joensuu.fi (email)
  • Zubizarreta Gerendiain, University of Joensuu, Faculty of Forest Sciences, FI-80101 Joensuu, Finland E-mail: azg@nn.fi
  • Peltola, University of Joensuu, Faculty of Forest Sciences, FI-80101 Joensuu, Finland E-mail: hp@nn.fi
  • Pulkkinen, Finnish Forest Research Institute, Haapastensyrjä Breeding Station, Karkkilantie E-mail: pp@nn.fi
  • Routa, University of Joensuu, Faculty of Forest Sciences, FI-80101 Joensuu, Finland E-mail: jr@nn.fi
  • Jaatinen, Finnish Forest Research Institute, Haapastensyrjä Breeding Station, Karkkilantie E-mail: rj@nn.fi
article id 191, category Research article
Katri Luostarinen, Noora Huotari, Eila Tillman-Sutela. (2009). Effect of regeneration method on growth, wood density and fibre properties of downy birch (Betula pubescens Ehrh.). Silva Fennica vol. 43 no. 3 article id 191. https://doi.org/10.14214/sf.191
Keywords: coppice; fibre length; fibre width; regeneration methods; wood properties
Abstract | View details | Full text in PDF | Author Info
Short rotation tree stands, established by coppicing, are nowadays used mainly for energy purposes in Fennoscandia, but their usage for pulp raw material may increase in the future. Downy birch (Betula pubescens), which is commonly used for pulp production in boreal zone, has good sprouting capacity. However, it is not known if the fibre properties of sprout-originated downy birches differ from those of seed-originated ones. Therefore, fibre length and width of sprout- and seed-originated downy birches grown on fertile soil were measured at a stand age of 25 years. Additionally annual ring width, stem height and diameter, and wood density were studied to compare the growth and wood properties of sprout- and seed-originated birches. Annual rings were slightly wider in sprout- than in seed-originated birches, whereas no differences were observed in wood density. Fibres, too, were slightly longer and wider in sprout- than in seed-originated trees. Still these minor differences observed here are hardly significant for the industries using birch wood. Consequently downy birch wood from coppiced stands is well suited for pulp. The advantages of coppice, i.e. rapidity and low costs of establishment, productivity, and the ability of downy birch to grow on untypical forest sites, may even increase the importance of the wood coming from coppiced birch stands in the future.
  • Luostarinen, Faculty of Forest Sciences, University of Joensuu, P.O. Box 111, FI-80101, Joensuu, Finland E-mail: katri.luostarinen@joensuu.fi (email)
  • Huotari, Finnish Forest Research Institute, Muhos Research Unit, Kirkkosaarentie, FI-91500 Muhos, Finland E-mail: nh@nn.fi
  • Tillman-Sutela, Finnish Forest Research Institute, Muhos Research Unit, Kirkkosaarentie, FI-91500 Muhos, Finland E-mail: ets@nn.fi
article id 247, category Research article
Ane Zubizarreta Gerendiain, Heli Peltola, Pertti Pulkkinen, Veli-Pekka Ikonen, Raimo Jaatinen. (2008). Differences in growth and wood properties between narrow and normal crowned types of Norway spruce grown at narrow spacing in Southern Finland. Silva Fennica vol. 42 no. 3 article id 247. https://doi.org/10.14214/sf.247
Keywords: fibre length; stem volume; height; diameter; wood density; earlywood; latewood
Abstract | View details | Full text in PDF | Author Info
In recent years there has been increased interest in the so called narrow crowned Norway spruce (Picea abies f. pendula), which is a rare mutant of Norway spruce (Picea abies (L.) Karsten), as a suitable wood raw material source for pulp and paper production. This is because it is less sensitive to competition than the normal crowned Norway spruce, and thus, could be more productive especially at dense spacing. In the above context, we investigated how the growth and yield (such as height, diameter, stem volume and ring width) in addition to wood density traits and fibre properties (such as wood density, fibre length and width, cell wall thickness and fibre coarseness) were affected in trees from 9 full-sib families representing narrow crowned Norway spruce grown at narrow spacing of 1 m 1 m in Southern Finland. For comparison, we used normal crowned Norway spruce trees from 6 breeding regions. We found that, compared to growth and yield traits, wood density traits and fibre properties showed, on average, lower phenotypic variations. In addition, these variations were smaller for narrow crowned families than for normal crowned genetic entries. Narrow crowned families also showed, on average, higher growth and yield and fibre length, but lower wood density. Moreover, the phenotypic correlations between growth, yield, wood density traits and fibre properties, ranged, on average, from moderate (narrow crowned) to high (normal crowned). As a whole, the growth and wood properties of narrow crowned families were found to be less sensitive to tree competition than the normal crowned genetic entries used as a comparison.
  • Zubizarreta Gerendiain, University of Joensuu, Faculty of Forest Sciences, Joensuu, Finland E-mail: ane.zubizarreta@joensuu.fi (email)
  • Peltola, University of Joensuu, Faculty of Forest Sciences, Joensuu, Finland E-mail: hp@nn.fi
  • Pulkkinen, Finnish Forest Research Institute, Haapastensyrjä Breeding Station, Läyliäinen, Finland E-mail: pp@nn.fi
  • Ikonen, University of Joensuu, Faculty of Forest Sciences, Joensuu, Finland E-mail: vpi@nn.fi
  • Jaatinen, Finnish Forest Research Institute, Haapastensyrjä Breeding Station, Läyliäinen, Finland E-mail: rj@nn.fi

Register
Click this link to register to Silva Fennica.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles