Current issue: 58(4)
A mathematical model was developed for determining the value of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst.) stems on the basis of sawing and pulping. The model was based on selling prices of sawn goods, pulp and other products as well as processing costs. Sawing was applied to large-dimension parts of stems and pulping to other parts and small stems. Bark and other residues were burned. The quality of pine stems was described by the distance of the lowest dead branch. In spruce only stem size affected the quality-
According to the results, the size of stem affects considerably the value of pine stems and clearly that of spruce stems. The main reason is an increase in the productivity of frame sawing as the stem size increases. In pine another factor is the higher price of sawn goods. The effect of pulp price increases as the stem size decreases. Even in large sized stems the effect of pulp was notable as the value of chips and saw dust was determined on the basis of product values in export. The competition ability of mechanical pulp was greatly affected by the price of electricity.
The PDF includes an abstract in English.
Planners of the Soviet pulp and paper industry are constantly faced with the problem: which investment policy guarantees the best location structure? Should one invest in existing localities or expand to new areas, especially in heavily forested parts of Siberia? A location theory for the pulp and paper industry, based on three factors (markets, wood raw materials, relative costs) has been suggested by the Soviet authors Antonov and Trusova. In the present study the theory is – for the first time – given empirical contents and the feasible areas for future growth of the industry are tentatively determined. One of the main findings of the study is the detecting of considerable unutilized wood reserves in the European USSR. This supports those Soviet views advocating a European-oriented location in investment strategy for the industry, as market and cost factors are unfavourable to Siberian location.
The PDF includes a summary in Finnish.
A Commission was appointed to examine the significance of pulpwood exports from the political-economic and social point of view. A survey was made of the development of woodworking industry in Finland. The article includes a detailed review on paper industry in Finland and abroad, pulpwood resources in Finland and outlook of the industry. The export of pulpwood was significant in 1925-1927, the most important country being Germany. The commission notes that It would be more profitable to refine the wood into more expensive products. It does, however, not see it necessary to restrict export of pulpwood. If restrictions are considered necessary, prohibition of export is a better way than export duties.
The best way to promote domestic paper industry is to increase the supply of Norway spruce (Picea abies (L.) H. Karst.). Measures are suggested to increase the productivity of the forests through forest improvement. The annual increment of spruce is calculated to cover the consumption in near future, provided the export of pulpwood does not amount to 600,000 m3, and the local demand of pulpwood does not exceed 7.8 million m3 annually. The Commission proposes that state ownership of forests is increased, forest management is intensified, and restrictions of forest industry to acquire forest land are removed.
It suggests also reliefs in taxation and import duties on fields related to transport, and equipment and raw materials needed by the paper industry.
The PDF includes a summary in English.
Short run market forecasting is desirable both for adjusting production and for regulating the national employment policy. In this study a forecast is made for one product. The purpose of the study is to develop a short run model describing newsprint sales in Finland that will combine mathematical simplicity, accuracy of description and universality.
Two methods of selecting variables seemed to be available. According to the first, newsprint consumption is divided into components, each of which is considered separately. The second method, which proved more fruitful, starts out directly from factors influencing the publishers’ decisions in purchasing newsprint, eliminating the least significant intuitively and simultaneously determining the lags.
The models developed in this study are capable of forecasting potential consumption. Even the best models in this study are multicollinear. The further into the future a forecast is extended, the greater is the possibility that relationships between the explanatory variables will change. It is intended that the newsprint seller will profit from the models achieved by using them to forecast sales in a future period, so that he can avoid both loss of interest due to acquiring a surplus of raw material or acute shortages of raw material.
The PDF includes a summary in Finnish.
The study examines the accuracy of volume tables for top measurement of pulpwood boles, and that of top measurement in general in Northern Finland. In this method only top diameter and length of the boles are measured, and the volume is obtained from volume tables. The boles have previously been measured in the middle of the bole, but the method is very time consuming in practice.
The result indicates that the form of both Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.) varies greatly. A pulpwood parcel, however, contains both rapidly and gently tapering logs, and the average form differences are much smaller. The difference between the real volume and the volume obtained from the volume tables is generally less than 12% and for more than third of the stock less than 4%.
Pine boles from private forests have been somewhat more and spruce boles less rapidly tapering than boles cut from state forests. The significance of the differences is not clear. Also, the boles in the northern part of the investigation area taper more sharply than those in the southern part.
It is concluded that the accuracy of the top measurement should be improved, but this is only theoretically possible by means of special tables and correction coefficients.
The Acta Forestalia Fennica issue 61 was published in honour of professor Eino Saari’s 60th birthday.
The PDF includes a summary in English.
Exported wood is measured at the port in Finland by certified measurers. Wood is paid according to these measuring certificates. However, in many cases the buyer measures the wood again in the country of destination, and gets smaller amounts. This sometimes causes awkward situations.
To examine the phenomenon one lot of pulpwood was measured both in Finland and in the destination country Germany. Several differences were found for the amounts of wood, and the author discussed the possible reasons for these differences.
However, because of the possible scattering in the measurements, several reductions are always made to the measurements. Hence it was proved that the buyer got the amount of wood they paid for. It is clear that the current practices and tools used to measure the amount of wood do not allow for any more accurate measures.
The PDF contains a summary in Finnish.
The purpose of the analysis presented in the article was to form an estimate as to future Finnish-American trade in forest products. The Finnish-American trade, that had its beginning in 1919, has been steadily growing and at the outbreak of the Second World War occupied third place in Finland’s total foreign trade. Over 90% of the Finnish exports consisted of forest industry products, pulp and newsprint being the most important items. The sales associations of the pulp and paper industries made it possible for the industries to gain a footing in the American market.
The production of pulp and most kinds of paper has increased in the USA up to 1942, but production of newsprint has tended to decrease. The timber resources of the country are large, but there is a considerable timber deficit in the northeastern states, therefore, these regions must be the principal aim for a campaign to build up the future market. According to the survey of future need of imports to the USA, more than two million tons of pulp and 2-3 million tons of paper products are needed in the immediate post-war period. The Canadian and Swedish competition will remain at about the same level, but one Finnish advantage, the quality, has disappeared on account of the progress made by research in the USA during the war.
The PDF includes a summary in Finnish.
The article summarizes import and export of timber and manufactured wood products in Europe before the Second World War, and outlines which are the opportunities of import and export after the war. The evaluation is based on statistics of 1936 and 1937. The export balance of Europe was positive; when all the timber assortments were included, Europe exported almost 10 million m3 more timber than it imported. Export and import of round timber were almost in balance, whereas export of paper products was about 12 million m3 larger than import. Consequently, European forest industry reached its magnitude before the war through export overseas. Foreign markets have been important especially for countries like Finland and other Nordic countries.
The war has disturbed the markets. In a scenario where Europe remains a closed sub-area in the global market, there is 10 million m3 excess of timber and wood products. Within Europe, United Kingdom is the greatest importer of timber and manufactured wood products. If UK was excluded from the European market, it would mean a big change in the export and import balance within the area. In 1936 and 1937 the import would have been only 45% and 55%, respectively, of the export if UK is not included in European numbers. If also Russia is excluded from the European sub-area, it would affect especially the export of round wood, sawn timber and plywood. Nordic countries have accounted for about 80% of European paper products export before the war. According to the article, Finnish wood resources do not allow big increase in sawn industry. However, there is potential in increasing demand of pulp in continental Europe in future. In general, Finnish forest industry would have to decrease the production, if the markets would be limited to the European sub-area.
The PDF includes a summary in German.
This is a working paper. It presents the laboratory experiments with soil samples from northern Finland, in which the precipitation of iron (Fe) was tested with limewater (Ca). There was no clear difference between samples with limewater and samples without limewater. However, the lime prevented the infiltration of iron almost totally.
The mineral content of soil effects the forest growth and yield and hence it is of interest for forestry. More research is needed both as field experiments and in the laboratory.
Factors determining newsprint consumption in Finland in 1960–1986 were analysed. An econometric recursive multi-equation model describing the structure of the newspaper industry was formulated and estimated to obtain information on direct factors influencing newsprint demand. Short-term and long-term demand elasticities for newspapers and newspaper advertising were estimated.
The results indicate that the main factors affecting newsprint consumption are total circulation of newspapers, volume of newspaper advertising and the change in newsprint substance weight. Total newspaper circulation was found to depend on the rate of household formation and real household income changes. Demand for newspapers was shown to be price-inelastic. Structural analysis indicates that income elasticity of newspaper demand has increased slightly over time.
The volume of newspaper advertising was shown to affect newsprint consumption via the effects on pagination. Newspaper and television advertising were found to be independent of each other. The impact of the reduction in the basis weight was found to be substantial. The estimation of long-term elasticities of demand for newspapers and newspaper advertising using dynamic models revealed that demand rigidities exist.
The case study of Finland proposes three reasons why newsprint demand has not shown clear signs of reaching a saturation level. First, although population growth has stagnated in major consuming countries, the number of households has been increasing continuously. Second, income elasticity of newspaper demand does not show a declining trend. Third, the main driving force behind the buoyant demand is the resurgence of demand for newspaper as an advertising medium. In forecasting newsprint consumption, in addition to projections of economic growth, attention must be paid to the rate of household formation, the development of the advertising sector, the factors affecting competition between alternative media and the resulting media-mix in advertising, and changes in the substantial weight.
The PDF includes a summary in Finnish
The study examines the factor demands of the Finnish pulp and paper industry. In the theoretical part of the study, factor demand equations are derived using neoclassical production theory. In the empirical part, econometric factor demand model is estimated using annual time-series data for the period 1960–86. The relationship of factor demands and their prices are examined in terms of own price, cross price and substitution elasticities.
It is assumed that the ”representative firm” in the pulp and paper industry is minimizing its costs of production at a given output level. In addition, a number of other assumptions are made which enable the production technology to be represented by a cost function, in which the inputs are capital, labour, energy and raw materials. From the cost function, the factor demand equations, i.e., the cost share equations are derived by applying Shephard’s lemma. The equations are transformed to estimable form using translog approximation for the underlying factor share functions.
The study differs from the previous factor demand studies by applying the error correction model based on the Granger Representation Theorem and the results of the cointegration literature to model the dynamics of the factor demand. This approach provides a statistically consistent method for estimating the long-run static factor demand equations and the corresponding short-run equations. In general, the econometrics of integrated processes (e.g. stationarity and cointegration tests) applied in the present study have not been applied before in factor demand systems models.
The empirical results of the study indicate that the error correction approach can be applied to estimations of the factor demands for the pulp and paper industry. In both industry sectors, the adjustment to short run disequlibrium (price shocks) appears to be fairly rapid. The most significant results of the calculated elasticities are that the factor demands of pulp and paper industries clearly react to changes in factor prices and that there are significant substitution possibilities between the different inputs. The absolute values of the elasticities are, on average, somewhat larger than have been obtained in previous studies.
The PDF includes a summary in Finnish.
Improvement of Finnish forest industries’ competitiveness in the world markets through productivity increase as branch and plant level requires the search for appropriate comprehensive productivity indicators and the analysis of factors underlying productivity variations. These were the main objectives of the study. The data was based on the information on individual plants in 1974, obtained from the files of Industrial Statistics in the Central Statistical Office in Finland.
The study uses neoclassical average production functions as the starting point and the theory is expanded to cover factors underlying productivity variation when measured with regard to labour, capital, material input, and total factor input. For the measurement of the latter an index formula is suggested which would not necessarily incorporate neoclassical assumptions as they cannot be assumed valid in the Finnish forest industries. The estimation results of average production functions suggest increasing rate of returns in sawmilling but in pulp and paper production evidence remains inconclusive. The elasticity of substitution is unlikely to be constant and the non-homotheticity assumption cannot be rejected.
The productivity variation is, in general, best explained by a relatively simple model with capital-labour ratio, plant size and output quality as explanatory factors. Further trials with input quality, input price ratio, process characteristics, and the rate of capacity utilization improved the models only marginally in most cases, which may have been partly due to the failure to measure the variables successfully.
The cross-section results are compared with those of an earlier time-series study. The estimation results of average production functions yield somewhat different information in the long and short run. Both cross-section and time-series productivity models illustrate the importance of output level in total productivity.
The PDF includes a summary in Finnish.
The aim of the present study was to explain how the Finnish paper industry increased its production and its exports, broadened its markets and managed to show a profit in its activities during the period between the two world wars, despite the restrictive international commercial policies then prevailing, and despite the economic depression of the thirties. Newsprint has been treated as a subject for detailed examination.
The study is based on a comparative investigation of the price received by the paper mills for their paper and the costs of production. Since the market price of paper fell during the twenty years in question, one must examine how the mills responded to the reduction in selling price. Technically the study ranges from the valuation of the standing timber to the handing over of the finished product to the buyer. Between 1929 and 1933 the cost of producing newsprint fell by 387 marks per ton.
The most significant factor in maintaining competitive power was the technical development and increased output brought about in the mills. That alone accounted for half the savings achieved. The reduction in the buying price of wood and in delivery costs accounted for about a third of the difference in production costs, and other factors for the remaining fifth. In addition, the devaluation of the Finnish mark was crucial. Measures taken to reduce costs were effective in so far as the paper mills, with only one or two exceptions, maintained their competitiveness in international markets and managed not only to retain but also to extend their markets.
The PDF includes a summary in English.
At present, there are no means for reliably comparing the wood fiber contents of different material streams within the paper industry material chain with each other. The aim of this article is to introduce conversion factors that make it possible to quantify the volume of wood expressed in roundwood equivalent (RWE) values for different paper industry-related materials in the material chain. These conversion factors apply to wood pulp, paper, and recovered paper. European data are used in quantifying the paper industry material streams and calculating the RWE conversion factors. The introduced conversion factors can be used to estimate RWE volumes at a global scale. With assumption that paper recycling did not occur and that paper production volume remained unchanged, an additional volume of 666 million m3 RWEs would be required globally per annum to produce 167 million tons of virgin wood pulp to replace 222 million tons of recovered paper utilized by the paper industry in 2010. This volume is approximately the same as 1.6 times the total removal of wood in Europe (EU27), or the total annual removal of wood in the USA, Canada, and Brazil combined.