Current issue: 58(4)

Under compilation: 58(5)

Scopus CiteScore 2023: 3.5
Scopus ranking of open access forestry journals: 17th
PlanS compliant
Select issue
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles by Pertti Harstela

Category : Article

article id 5619, category Article
Pertti Harstela. (1997). Decision support systems in wood procurement. A review. Silva Fennica vol. 31 no. 2 article id 5619. https://doi.org/10.14214/sf.a8520
Keywords: decision making; decision support systems; planning; wood procurement
Abstract | View details | Full text in PDF | Author Info

Many kinds of planning systems have been labelled decision support systems (DSS), but few meet the most important features of real DSSs in planning and control of wood procurement. It has been concluded that many reasons exist to develop DSSs for wood procurement. The purchasing of timber seems to be one of the most promising areas for DSS, because there is no formal structure for these operations and decisions deal with human behaviour. Relations between DSSs and different features of the new approaches in wood procurement are also discussed, and hypotheses for future studies suggested.

  • Harstela, E-mail: ph@mm.unknown (email)
article id 5547, category Article
Tiina Tolvanen-Sikanen, Pertti Harstela, Lauri Sikanen. (1995). A game theoretic simulation model for quality oriented timber supply to sawmills. Silva Fennica vol. 29 no. 1 article id 5547. https://doi.org/10.14214/sf.a9198
Keywords: simulation; quality; timber procurement; supply; sawmills; statistical analysis; probability
Abstract | View details | Full text in PDF | Author Info

The first aim of this study was to develop a simulation model describing the flow of different timber qualities to different firms. The second aim was to study preliminary the factors which affect timber distributions. In addition, we tested the hypothesis that in a small sawmill firm the traditional way of organizing timber procurement does not direct effectively good quality logs to the special production. The game theoretic approaching and the principles of Monte-Carlo simulation were applied in development of the simulation model. The most important factors of the model were tried to find for further studies with sensitive analysis. Empirical validation brought forth promising results in the area of one municipality. The buyer’s awareness of a marked stand, the seller’s willingness to sell a marked stand, the buyer’s ability to pay for wood and the proportion of first quality pine logs in a marked stand affected the distribution of pine logs. The results also supported the hypothesis that the traditional system, in which sawmills or their own forest departments procure themselves all timber needed, is not the most effective way to direct enough good quality timber to the special production.

  • Tolvanen-Sikanen, E-mail: tt@mm.unknown (email)
  • Harstela, E-mail: ph@mm.unknown
  • Sikanen, E-mail: ls@mm.unknown
article id 5500, category Article
Mikko Kantola, Pertti Harstela. (1993). Puunhankinnan englantilaiset ja suomalaiset perustermit. Silva Fennica vol. 27 no. 1 article id 5500. https://doi.org/10.14214/sf.a15661
English title: The basic terminology of timber harvesting in Finnish and in English .
Keywords: terminology; timber harvesting
Abstract | View details | Full text in PDF | Author Info

The paper discussed the definitions of different Finnish and English terms concerning timber harvesting, and suggests definitions and translations of the terms.

  • Kantola, E-mail: mk@mm.unknown (email)
  • Harstela, E-mail: ph@mm.unknown
article id 5240, category Article
Pertti Harstela, Kimmo Piirainen. (1985). Effect of whole-body vibration and driving a forest machine simulator on some physiological variables of the operator. Silva Fennica vol. 19 no. 2 article id 5240. https://doi.org/10.14214/sf.a15419
Keywords: heart rate; forest workers; ergonomy; occupational health; physical stress; forestry equipment; forest machine drivers; horizontal vibration
Abstract | View details | Full text in PDF | Author Info

The influence of horizontal whole-body vibration of fairly low intensity alone and combined with the mental load and motor action typical for the forest machine drive on heart rate variability (HRV), respiration rate (RR) and heart rate (HR) was studied by testing five subjects. Horizontal vibration had an influence on HR, HRV and RR. ’Control activities’ had the most influence on RR and HRV, but some influence on HR, too. ’Moving the control devices’ (motor action) gave the same response in HR as ’control activities’, but not in HRV and RR. ’Control activities’ together with ’vibration’ had a more effect on HRV and RR than these two factors singly, but not on HR. The possibilities of using these variables in field studies are discussed.

The PDF includes a summary in Finnish.

  • Harstela, E-mail: ph@mm.unknown (email)
  • Piirainen, E-mail: kp@mm.unknown
article id 5179, category Article
Pertti Harstela, Antti Maukkonen. (1983). Tavanomainen ja kuormainprosessori varttuneissa harvennusmetsiköissä. Silva Fennica vol. 17 no. 2 article id 5179. https://doi.org/10.14214/sf.a15095
English title: A conventional and grapple loader processor in second and third thinnings. A simulator experiment.
Original keywords: harvennushakkuu; puunkorjuu; työntutkimus; metsäkoneet; ensiharvennus; prosessori; kuormainprosessori; simulaattori
English keywords: logging; thinnings; timber harvesting; work studies; prosessor; grapple loader processor; simulator
Abstract | View details | Full text in PDF | Author Info

Using literature and a simulator experiment, an ordinary processor and a grapple loader processor were compared in conditions corresponding to thinning later than the first commercial thinning. Visual bucking only was employed in the simulator experiment. The strip road spacing was 30 m and there was no preliminary skidding of the trees. The simulator experiment confirmed the view reached in the literature that work productivity of the grappler loader processor is 20–40 % greater than that of an ordinary processor provided that the stem size is under 0.2–0.4 m3.

The PDF includes a summary in English.

  • Harstela, E-mail: ph@mm.unknown (email)
  • Maukkonen, E-mail: am@mm.unknown
article id 5059, category Article
Pertti Harstela. (1980). Jäljelle jäävä puusto ja ajouralta toimivat harvennuspuun korjuukoneet. Silva Fennica vol. 14 no. 1 article id 5059. https://doi.org/10.14214/sf.a15000
English title: Remaining trees and machines working from the strip roads in thinning.
Original keywords: harvennushakkuu; puunkorjuu; metsäkoneet; ajourat; jäljelle jäävä puusto; valikoiva harvennus
English keywords: skidding; thinning; timber harvesting; forest machines; strip roads; remaining trees
Abstract | View details | Full text in PDF | Author Info

In the first part of the study the hindrance of the remaining trees when felling trees by machines working from the strip road in selective thinning was studied on the basis of the literature. In the second part there was geometrically studied the need of schematic thinning in some type stands when bundles are pre-skidded straight-lined to the strip road. In average only 0-1 trees per pre-skidding trail needs to be removed. It was concluded that trees removed from the pre-skidding trail do not significantly increase the need of schematic thinning. Remaining trees do not limit the length of machine booms if the pre-skidding trails are planned during the felling.

The PDF includes a summary in English.

  • Harstela, E-mail: ph@mm.unknown (email)
article id 4991, category Article
Pertti Harstela, Leo Tervo. (1978). Taimikkopuun korjuumenetelmien vertailua. Silva Fennica vol. 12 no. 2 article id 4991. https://doi.org/10.14214/sf.a14845
English title: Comparison of methods for harvesting in sapling stand.
Original keywords: metsätyö; taimikko; harvennus; koneellistaminen; kustannukset; korjuukustannukset; haketus
English keywords: thinning; mechanization; seedling stand; forest work; harvesting costs
Abstract | View details | Full text in PDF | Author Info

A theoretical nomogram was made for estimating the costs of fully mechanized thinning and the driving speed of the machine. Based on this nomogram and the previous studies three harvesting methods were compared; systematic fully mechanized harvesting, selective fully mechanized harvesting, and manual felling combined with whole-tree chipping.

The third method was cheaper than the fully mechanized methods in a pole-stage stand. The choice of the most advantageous chipping station depended on conditions, but the smaller tree size and possibly the reduced damage on the remaining stand favour chipping on the strip road rather than chipping on the intermediate landing or at the mill.

Mechanized systematic thinning was the cheapest method for harvesting in the sapling stand. The required driving speed were so low that ergonomic factors should not hinder its use. Factors related to the future production of the stand do, however, limit its use. Mechanized selective thinning does not seem to be an economic method for harvesting in a sapling or pole-stage stand.

The PDF includes a summary in English.

  • Harstela, E-mail: ph@mm.unknown (email)
  • Tervo, E-mail: lt@mm.unknown
article id 4985, category Article
Pertti Harstela. (1978). Metsätyön kuormittavuuden määrittelyä. Silva Fennica vol. 12 no. 1 article id 4985. https://doi.org/10.14214/sf.a14839
English title: Definition of the amount of strain caused by forest work.
Original keywords: metsätyö; ergonomia; työn kuormittavuus
English keywords: ergonomics; work load; forest work; physical stress
Abstract | View details | Full text in PDF | Author Info

The concepts central to ergonomic research connected with the amount of strain caused by work was studied. A model was made to describe the process of strain. The model includes the following concepts: load or stress, human input, worker, strain, renewal of human resources, output and their hierarchical units. Based on the quality of human input, the forest work was roughly divided into two categories: (1) work demanding primarily muscle activity and (2) neuro-sensory work. In the first group, especially in cutting work, the main part of the human input is intensive consumption of muscle energy. In addition, work load causes accidents, wear of skeletal and muscular systems and processes by noise, vibrations, and climate. Correspondingly, when operating forest machines, the human input is mainly neuro-sensory functions of the central nervous system. Work load causes directly the effects of low frequency vibration and of other work conditions. The model was tested on data from research of forest work.

The PDF includes a summary in English.

  • Harstela, E-mail: ph@mm.unknown (email)
article id 4900, category Article
Pertti Harstela. (1974). Eräiden koneellistamisennusteiden herkkyydestä kustannustason muutoksiin. Silva Fennica vol. 8 no. 2 article id 4900. https://doi.org/10.14214/sf.a14744
English title: The influence of the change of cost level on some mechanization prognosis.
Original keywords: koneellistaminen; puunkorjuu; kustannukset; ennustaminen
English keywords: costs; mechanization; timber harvesting; prognosis
Abstract | View details | Full text in PDF | Author Info

In this study a formula has been developed to describe the influence of the change of cost level on such a mechanization prognosis, where is assumed that wages and machine costs bear compound interest. In the study there are some numerical examples.

In the formula p1 = annual per cent increase of wages, p3 = annual per cent increase of machine costs, p2 = sudden and incident per cent increase of machine costs, and tv = delay in the profitability of mechanization.

The PDF includes a summary in English.

  • Harstela, E-mail: ph@mm.unknown (email)

Category : Research article

article id 146, category Research article
Karri Uotila, Juho Rantala, Timo Saksa, Pertti Harstela. (2010). Effect of soil preparation method on economic result of Norway spruce regeneration chain. Silva Fennica vol. 44 no. 3 article id 146. https://doi.org/10.14214/sf.146
Keywords: Picea abies; soil preparation; cleaning; disc trenching; forestry investment analysis; pre-commercial thinning; regeneration chain; spot mounding; sprouting
Abstract | View details | Full text in PDF | Author Info
Economic result of forest regeneration chains, based either on spot mounding or on disc trenching and planting of Norway spruce (Picea abies [L.] Karst.) seedlings, were clarified and compared to each other. First, effects of soil preparation method on early development of Norway spruce stands were measured from field experiments. Second, the effects of soil preparation method on stand level management programs were modelled. The modelling was based on growth simulation and investment calculations. The soil preparation methods substantially affected early development of a stand. The density of the removed trees in early cleaning was 56% higher on the disc-trenched area compared to the spot-mounded area. The difference was especially high (120%), close by (< 25 cm) the remained spruce seedlings. There was also a difference between the methods in the growth of crop spruces; at biological age of 8 years, the mean height of spruce was 110 cm on the spot-mounded area and 68 cm on the disc-trenched area. The differences led to divergent management programs between the areas. The disc-trenched area needed three young stand management operations whereas two was enough at the spot-mounded area. Although disc trenching is a less expensive method than spot mounding, the total management costs were higher in disc trenching than in spot mounding. Furthermore, incomes from the first commercial thinning were higher when regeneration based on spot mounding. At the interest rate of 3%, the investment in spot mounding had 329 EUR ha–1 higher net present value than the investment in disc trenching.
  • Uotila, Finnish Forest Research Institute, Suonenjoki, Finland E-mail: karri.uotila@metla.fi (email)
  • Rantala, Finnish Forest Research Institute, Suonenjoki, Finland E-mail: jr@nn.fi
  • Saksa, Finnish Forest Research Institute, Suonenjoki, Finland E-mail: ts@nn.fi
  • Harstela, Finnish Forest Research Institute, Suonenjoki, Finland E-mail: ph@nn.fi
article id 186, category Research article
Juho Rantala, Pertti Harstela, Veli-Matti Saarinen, Leo Tervo. (2009). A techno-economic evaluation of Bracke and M-planter tree planting devices. Silva Fennica vol. 43 no. 4 article id 186. https://doi.org/10.14214/sf.186
Keywords: productivity; cost-efficiency; mechanization; planting cost
Abstract | View details | Full text in PDF | Author Info
Techno-economically reasonable mechanization of tree planting has proved to be a difficult task in the Nordic working conditions. Although planting machines and combinations of base machine and planting device have been developed since the 1970s, mechanized planting has not been cost-competitive to manual planting. The aim of this study was to find out work time distributions, productivities, costs and effects of different work difficulty factors on productivities and costs of the state-of-the-art Nordic planting devices, Swedish Bracke and Finnish M-Planter, and to compare the devices with each other. The theory of comparative time studies was the base for the experimental design of this study. In the average working conditions, productivity (E15) of M-Planter (236 seedlings/hour) was 36.0% higher than that of Bracke (174 seedlings/hour). Here, M-Planter performed planting work 23.4% cheaper than Bracke. However, the difference depended greatly on the working conditions; the more stones or stumps the smaller the difference, and the more slash the bigger the difference.
  • Rantala, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: juho.rantala@metla.fi (email)
  • Harstela, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: ph@nn.fi
  • Saarinen, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: vms@nn.fi
  • Tervo, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: lt@nn.fi
article id 515, category Research article
Juho Rantala, Kari Väätäinen, Nuutti Kiljunen, Pertti Harstela. (2003). Economic evaluation of container seedling packing and disinfection machinery. Silva Fennica vol. 37 no. 1 article id 515. https://doi.org/10.14214/sf.515
Keywords: economies of scale; nursery technology; mechanisation; container seedlings; packing;
Abstract | View details | Full text in PDF | Author Info
Productivity and costs of packing container seedlings were studied in a mechanised line for packing and disinfecting seedling trays. The hypothesis was that adequate cost-efficiency could be achieved when some common principles of mechanisation were applied. Results indicated that the unit costs are lower than those of manual packing, if these principles were applied and the annual number of packed seedlings exceeded 6 million. However, most of the nurseries in Finland are still too small to gain a real advantage from large-scale production.
  • Rantala, Finnish Forest Research Institute, Suonenjoki Research Station, FIN-77600 Suonenjoki, Finland E-mail: juho.rantala@metla.fi (email)
  • Väätäinen, Finnish Forest Research Institute, Joensuu Research Centre, FIN-80101 Joensuu, Finland E-mail: kv@nn.fi
  • Kiljunen, Finnish Forest Research Institute, Suonenjoki Research Station, FIN-77600 Suonenjoki, Finland E-mail: nk@nn.fi
  • Harstela, Finnish Forest Research Institute, Suonenjoki Research Station, FIN-77600 Suonenjoki, Finland E-mail: ph@nn.fi

Register
Click this link to register to Silva Fennica.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles