Current issue: 58(4)

Under compilation: 58(5)

Scopus CiteScore 2023: 3.5
Scopus ranking of open access forestry journals: 17th
PlanS compliant
Select issue
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Silva Fennica vol. 41 | 2007

Category : Special section

article id 472, category Special section
Raisa Mäkipää, Jari Liski, Mats Olsson, Pete Smith, Esther Thürig. (2007). Workshop on Development of Models and Forest Soil Surveys for Monitoring of Soil Carbon. Silva Fennica vol. 41 no. 3 article id 472. https://doi.org/10.14214/sf.472
Abstract | View details | Full text in PDF | Author Info
Selected Papers of the Workshop on Development of Models and Forest Soil Surveys for Monitoring of Soil Carbon.
  • Mäkipää, Finnish Forest Research Institute E-mail: rm@nn.fi (email)
  • Liski, Finnish Environment Institute, Finland E-mail: jl@nn.fi
  • Olsson, Swedish University of Agricultural Sciences, Sweden E-mail: mo@nn.se
  • Smith, University of Aberdeen, UK E-mail: ps@nn.uk
  • Thürig, Swiss Federal Research Institute WSL, Switzerland E-mail: et@nn.ch
article id 290, category Special section
Mikko Peltoniemi, Esther Thürig, Stephen Ogle, Taru Palosuo, Marion Schrumpf, Thomas Wutzler, Klaus Butterbach-Bahl, Oleg Chertov, Alexander Komarov, Aleksey Mikhailov, Annemieke Gärdenäs, Charles Perry, Jari Liski, Pete Smith, Raisa Mäkipää. (2007). Models in country scale carbon accounting of forest soils. Silva Fennica vol. 41 no. 3 article id 290. https://doi.org/10.14214/sf.290
Keywords: National Forest Inventory; soil carbon; greenhouse gas inventory; decomposition; IPCC; regional and national modeling; soil model
Abstract | View details | Full text in PDF | Author Info
Countries need to assess changes in the carbon stocks of forest soils as a part of national greenhouse gas (GHG) inventories under the United Nations Framework Convention on Climate Change (UNFCCC) and the Kyoto Protocol (KP). Since measuring these changes is expensive, it is likely that many countries will use alternative methods to prepare these estimates. We reviewed seven well-known soil carbon models from the point of view of preparing country-scale soil C change estimates. We first introduced the models and explained how they incorporated the most important input variables. Second, we evaluated their applicability at regional scale considering commonly available data sources. Third, we compiled references to data that exist for evaluation of model performance in forest soils. A range of process-based soil carbon models differing in input data requirements exist, allowing some flexibility to forest soil C accounting. Simple models may be the only reasonable option to estimate soil C changes if available resources are limited. More complex models may be used as integral parts of sophisticated inventories assimilating several data sources. Currently, measurement data for model evaluation are common for agricultural soils, but less data have been collected in forest soils. Definitions of model and measured soil pools often differ, ancillary model inputs require scaling of data, and soil C measurements are uncertain. These issues complicate the preparation of model estimates and their evaluation with empirical data, at large scale. Assessment of uncertainties that accounts for the effect of model choice is important part of inventories estimating large-scale soil C changes. Joint development of models and large-scale soil measurement campaigns could reduce the inconsistencies between models and empirical data, and eventually also the uncertainties of model predictions.
  • Peltoniemi, Finnish Forest Research Institute, Vantaa Research Unit, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: mikko.peltoniemi@metla.fi (email)
  • Thürig, Swiss Federal Institute for Forest, Snow and Landscape Research (WSL), Birmensdorf, Switzerland; European Forest Institute, Joensuu, Finland E-mail: et@nn.ch
  • Ogle, Natural Resources Ecology Laboratory, Colorado State University, Fort Collins, USA E-mail: so@nn.us
  • Palosuo, European Forest Institute, Joensuu, Finland E-mail: tp@nn.fi
  • Schrumpf, Max-Planck-Institute for Biogeochemistry, Jena, Germany E-mail: ms@nn.de
  • Wutzler, Max-Planck-Institute for Biogeochemistry, Jena, Germany E-mail: tw@nn.de
  • Butterbach-Bahl, Institute for Meteorology and Climate Research, Forschungszentrum Karlsruhe GmbH, Garmisch-Partenkirchen, Germany E-mail: kbb@nn.de
  • Chertov, St. Petersburg State University, St. Petersburg-Peterhof, Russia E-mail: oc@nn.ru
  • Komarov, Institute of Physicochemical and Biological Problems in Soil Science of Russian Academy of Sciences, Pushchino, Russia E-mail: ak@nn.ru
  • Mikhailov, Institute of Physicochemical and Biological Problems in Soil Science of Russian Academy of Sciences, Pushchino, Russia E-mail: am@nn.ru
  • Gärdenäs, Dept. of Soil Sciences, Swedish University of Agricultural Sciences, Uppsala, Sweden E-mail: ag@nn.se
  • Perry, USDA Forest Service, Northern Research Station, St. Paul, MN USA E-mail: cp@nn.us
  • Liski, Finnish Environment Institute, Helsinki, Finland E-mail: jl@nn.fi
  • Smith, School of Biological Sciences, University of Aberdeen, Aberdeen, UK E-mail: ps@nn.uk
  • Mäkipää, Finnish Forest Research Institute, Vantaa Research Unit, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: raisa.makipaa@metla.fi
article id 289, category Special section
Thomas Wutzler, Martina Mund. (2007). Modelling mean above and below ground litter production based on yield tables. Silva Fennica vol. 41 no. 3 article id 289. https://doi.org/10.14214/sf.289
Keywords: uncertainty; thinnings; soil carbon; biomass turnover; carbon accounting; harvest residues; sensitivity analysis
Abstract | View details | Full text in PDF | Author Info
Estimates of litter production are a prerequisite for modeling soil carbon stocks and its changes at regional to national scale. However, the required data on biomass removal is often available only for the recent past. In this study we used yield tables as a source of probable past forest management to drive a single tree based stand growth model. Next, simulated growth and timber volume was converted to tree compartment carbon stocks and biomass turnover. The study explicitly accounted for differences in site quality between stands. In addition we performed a Monte Carlo uncertainty and sensitivity analysis. We exemplify the approach by calculating long-term means of past litter production for 10 species by using yield tables that have been applied in Central Germany during the last century. We found that litter production resulting from harvest residues was almost as large as the one from biomass turnover. Differences in site quality caused large differences in litter production. At a given site quality, the uncertainty in soil carbon inputs were 14%, 17%, and 25% for beech, spruce, and pine stands, respectively. The sensitivity analysis showed that the most influential parameters were associated with foliage biomass and turnover. We conclude that rates of mean past litter production and their uncertainties can reliably be modeled on the basis of yield tables if the model accounts for 1) full rotation length including thinning and final harvest, 2) differences in site quality, and 3) environmental dependency of foliage biomass and foliage turnover.
  • Wutzler, Max Planck Institute for Biogeochemistry, Jena, Germany E-mail: tm@nn.de (email)
  • Mund, Max Planck Institute for Biogeochemistry, Jena, Germany E-mail: mm@nn.de
article id 288, category Special section
Björn Berg, Per Gundersen, Cecilia Akselsson, Maj-Britt Johansson, Åke Nilsson, Lars Vesterdal. (2007). Carbon sequestration rates in Swedish forest soils – a comparison of three approaches. Silva Fennica vol. 41 no. 3 article id 288. https://doi.org/10.14214/sf.288
Keywords: carbon sequestration; stable humus; forest floor C; litter decomposition; limit value
Abstract | View details | Full text in PDF | Author Info

Carbon sequestration rates in forest soil can be estimated using the concept of calculable stable remains in decomposing litter. In a case study of Swedish forest land we estimated C-sequestration rates for the two dominant tree species in the forest floor on top of the mineral soil. Carbon sequestration rates were upscaled to the forested land of Sweden with 23 x 106 ha with Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (Karst.) L.). Two different theoretical approaches, based on limit-value for litter decomposition and N-balance for vegetation and SOM gave rates of the same magnitude. For the upscaling, using these methods, 17 000 grids of 5 x 5 km were used.

The ‘limit-value approach’ gave a sequestration of 4.8   106 tons of C, annually sequestered in the forest floor, with an average of 180 kg C ha–1 yr–1 and a range from 40 to 410 kg C ha–1 yr–1. The ‘N-balance approach’ gave an average value of c. 96 kg ha–1 yr–1 and a range from –60 to 360 kg ha–1 yr–1. A method based on direct measurements of changes in humus depth over 40 years, combined with C analyses gave an average rate that was not very different from the calculated rates, viz. c. 180 kg ha–1 yr–1 and a range from –20 to 730 kg ha–1 yr–1. These values agree with forest floor C sequestration rate based on e.g. sampling of chronsequences but differ from CO2 balance measurements.

The three approaches showed different patterns over the country and regions with high and low carbon sequestration rates that were not always directly related to climate.

  • Berg, Dept. of Forest Ecology, University of Helsinki, Finland (present address: Dipartimento Biologia Strutturale e Funzionale, Complesso Universitario, Monte S. Angelo, Napoli, Italy E-mail: bjorn.berg@helsinki.fi (email)
  • Gundersen, Forest & Landscape Denmark, University of Copenhagen, Denmark E-mail: pg@nn.dk
  • Akselsson, Swedish Environmental Research Institute, IVL, Gothenburg, Sweden E-mail: ca@nn.se
  • Johansson, Department of Forest Soils, SLU, Uppsala, Sweden E-mail: mbj@nn.se
  • Nilsson, Department of Forest Soils, SLU, Uppsala, Sweden E-mail: an@nn.se
  • Vesterdal, Forest & Landscape Denmark, University of Copenhagen, Denmark E-mail: lv@nn.dk
article id 287, category Special section
Mikko Peltoniemi, Juha Heikkinen, Raisa Mäkipää. (2007). Stratification of regional sampling by model-predicted changes of carbon stocks in forested mineral soils. Silva Fennica vol. 41 no. 3 article id 287. https://doi.org/10.14214/sf.287
Keywords: uncertainty; soil carbon; anticipated variance; forest soil; monitoring; repeated measurement; soil survey; stratified sampling
Abstract | View details | Full text in PDF | Author Info
Monitoring changes in soil C has recently received interest due to reporting under the Kyoto Protocol. Model-based approaches to estimate changes in soil C stocks exist, but they cannot fully replace repeated measurements. Measuring changes in soil C is laborious due to small expected changes and large spatial variation. Stratification of soil sampling allows the reduction of sample size without reducing precision. If there are no previous measurements, the stratification can be made with model-predictions of target variable. Our aim was to present a simulation-based stratification method, and to estimate how much stratification of inventory plots could improve the efficiency of the sampling. The effect of large uncertainties related to soil C change measurements and simulated predictions was targeted since they may considerably decrease the efficiency of stratification. According to our simulations, stratification can be useful with a feasible soil sample number if other uncertainties (simulated predictions and forecasted forest management) can be controlled. For example, the optimal (Neyman) allocation of plots to 4 strata with 10 soil samples from each plot (unpaired repeated sampling) reduced the standard error (SE) of the stratified mean by 9–34% from that of simple random sampling, depending on the assumptions of uncertainties. When the uncertainties of measurements and simulations were not accounted for in the division to strata, the decreases of SEs were 2–9 units less. Stratified sampling scheme that accounts for the uncertainties in measured material and in the correlates (simulated predictions) is recommended for the sampling design of soil C stock changes.
  • Peltoniemi, Finnish Forest Research Institute, Vantaa Research Unit, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: mikko.peltoniemi@metla.fi (email)
  • Heikkinen, Finnish Forest Research Institute, Vantaa Research Unit, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: jh@nn.fi
  • Mäkipää, Finnish Forest Research Institute, Vantaa Research Unit, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: raisa.makipaa@metla.fi

Category : Research article

article id 469, category Research article
Henri Vanhanen, Timo O. Veteli, Sonja Päivinen, Seppo Kellomäki, Pekka Niemelä. (2007). Climate change and range shifts in two insect defoliators: gypsy moth and nun moth – a model study. Silva Fennica vol. 41 no. 4 article id 469. https://doi.org/10.14214/sf.469
Keywords: insects; forest pests; CLIMEX; Lymantria monacha; Lymantria dispar; poleward shift; geographical range
Abstract | View details | Full text in PDF | Author Info
Environmental factors influenced by global climate change determine the distribution ranges of organisms. Especially ectothermic animals are expected to shift their distribution ranges northwards in the next hundred years or so. In this study simulations made with CLIMEX-modelling software were used to predict the future distribution ranges of two Central European serious forest pest species: the nun moth (Lymantria monacha L. (Lepidoptera: Lymantriidae)) and the gypsy moth (L. dispar L). The software calculates an ecoclimatic index based on the life cycle requirements of a species and thus represents the probability of a viable population to exist at a certain location. Three different climate warming scenarios were considered: temperature increase of 1.4, 3.6 and 5.8°C. Simulations generated with the current climate conditions corresponded well to the current distributions of the species. The climate warming scenarios shifted the northern boundary of the distribution for both of these species north by c. a. 500–700 km. Also the southern edge of the ranges retracted northwards by 100–900 km. The results of this study are in agreement with the results of empirical studies on other species. Being serious pest species, these species pose a potential threat to silviculture and therefore, have to be considered in the planning of forest management practices.
  • Vanhanen, Faculty of Forestry, University of Joensuu, P.O.B. 111, FI-80101 Joensuu, Finland E-mail: hv@nn.fi
  • Veteli, Faculty of Biosciences, University of Joensuu, P.O.B. 111, FI-80101, Joensuu, Finland E-mail: timo.veteli@joensuu.fi (email)
  • Päivinen, Faculty of Forestry, University of Joensuu, P.O.B. 111, FI-80101 Joensuu, Finland E-mail: sp@nn.fi
  • Kellomäki, Faculty of Forestry, University of Joensuu, P.O.B. 111, FI-80101 Joensuu, Finland E-mail: sk@nn.fi
  • Niemelä, Faculty of Forestry, University of Joensuu, P.O.B. 111, FI-80101 Joensuu, Finland E-mail: pn@nn.fi
article id 279, category Research article
Gerben Janse. (2007). Characteristics and challenges of forest sector communication in the EU. Silva Fennica vol. 41 no. 4 article id 279. https://doi.org/10.14214/sf.279
Keywords: forest policy; European level; forest sector; communication processes
Abstract | View details | Full text in PDF | Author Info
Fragmentation of forest policy at the EU level and image problems of the forest industry have increased forest sector actors’ interest for cooperation on and coordination of communication activities. Although internal communication in the forest sector at the European level is generally well developed both formally and informally, the desired strengthening of communication with other sectors and the public at large is perceived as difficult. In this pre-study 39 interviews were conducted with EU and UNECE/FAO officials, EU level Forest-based Industries and forestry sector federation representatives, and forest scientists working at the European level. The results indicate that EU level forest sector core actors’ ideas on communication differ. Ideas range from strictly image improvement; being more successful at lobbying with other sectors and high-level policy-makers; up to building long-lasting relations and two-way communication processes with other sectors. This makes it difficult to come to coordinated action among forest sector actors. A more active exchange of information on best practices in forest communication between national as well as European level actors, and increased coordination of communication efforts is desired by industry, forest owners as well as policy-makers. However, clear ideas on how to improve, especially inter-sectoral, communication are largely lacking.
  • Janse, European Forest Institute, Joensuu, Finland E-mail: gerben.janse@efi.int (email)
article id 278, category Research article
Katri Luostarinen. (2007). The effect of annual ring orientation and drying method on deformations, casehardening and colour of silver birch (Betula pendula) boards. Silva Fennica vol. 41 no. 4 article id 278. https://doi.org/10.14214/sf.278
Keywords: wood; timber quality; dimensional stability; distortion; drying schedules; kiln drying; L*a*b* coordinates
Abstract | View details | Full text in PDF | Author Info
Deformations of timber, caused mainly by anisotropic shrinkage, can be partially directed by controlling annual ring orientation through different sawing patterns. Ring orientation also affects the movement of water from within the board to its surface, with rapidity of drying having implications for the wood colour. Here sawn silver birch (Betula pendula Roth) timber was classed into two groups according to ring orientation. Two drying methods were used. The final moisture content was lower and the colour lighter in dried boards with radial than with tangential flats, but deformations were larger in radial than in tangential boards. Both drying and ring orientation affected the final moisture content and moisture gradient of the boards. Very small differences in board sizes or shape had an effect on both colour and deformations. The results support the need for accurate sawing and for classing silver birch timber sawn into parquet billets according to ring orientation in order to optimise the drying quality.
  • Luostarinen, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: katri.luostarinen@joensuu.fi (email)
article id 277, category Research article
Laura Koskela, Bikas K. Sinha, Tapio Nummi. (2007). Some aspects of the sampling distribution of the Apportionment Index and related inference. Silva Fennica vol. 41 no. 4 article id 277. https://doi.org/10.14214/sf.277
Keywords: harvesting; bucking; dissimilarity index; multinomial distribution; overlapping coefficient
Abstract | View details | Full text in PDF | Author Info
As customer-oriented production strategies have gained ground in the sawmill industry, proper measurement of the fit between the log demand and log output distributions has become of crucial importance. The prevailing means of measuring the outcome is the so-called Apportionment Index (AI), which is calculated from the relative proportions of the observed and required distributions. Although some statistical properties of the AI have recently been examined and alternative means of measuring the bucking outcome have been suggested, properties of the sampling distribution of the AI have not yet been widely studied. In this article we examine the asymptotic sampling distribution for the AI by assuming a multinomial distribution for the outcome. Our results are based mainly on large-sample normal approximations. Also some studies of the determination of the number of logs needed to obtain a specified level of accuracy of the AI have been carried out.
  • Koskela, University of Tampere, Dept of Mathematics, Statistics and Philosophy, FI-33014 University of Tampere, Finland E-mail: laura.koskela@uta.fi (email)
  • Sinha, Indian Statistical Institute, Kolkata, India E-mail: bks@nn.in
  • Nummi, University of Tampere, Dept of Mathematics, Statistics and Philosophy, FI-33014 University of Tampere, Finland E-mail: tn@nn.fi
article id 276, category Research article
Jianping Zhu, Pete Bettinger, Rongxia Li. (2007). Additional insight into the performance of a new heuristic for solving spatially constrained forest planning problems. Silva Fennica vol. 41 no. 4 article id 276. https://doi.org/10.14214/sf.276
Keywords: forest planning; harvest scheduling; heuristics; raindrop method
Abstract | View details | Full text in PDF | Author Info
  • Zhu, Warnell School of Forestry and Natural Resources, University of Georgia, Athens, GA 30602, USA E-mail: jz@nn.us
  • Bettinger, Warnell School of Forestry and Natural Resources, University of Georgia, Athens, GA 30602, USA E-mail: pbettinger@warnell.uga.edu (email)
  • Li, Warnell School of Forestry and Natural Resources, University of Georgia, Athens, GA 30602, USA E-mail: rl@nn.us
article id 275, category Research article
Lauri Korhonen, Kari T. Korhonen, Pauline Stenberg, Matti Maltamo, Miina Rautiainen. (2007). Local models for forest canopy cover with beta regression. Silva Fennica vol. 41 no. 4 article id 275. https://doi.org/10.14214/sf.275
Keywords: beta regression; canopy cover; forest canopy
Abstract | View details | Full text in PDF | Author Info
Accurate field measurement of the forest canopy cover is too laborious to be used in extensive forest inventories. A possible alternative to the separate canopy cover measurements is to utilize the correlations between the percent canopy cover and easier-to-measure forest variables, especially the basal area. A fairly new analysis technique, the beta regression, is specially designed for modelling percentages. As an extension to the generalized linear models, the beta regression takes into account the distribution of the model residuals, and uses a logistic link function to ensure logical predictions. In this study, the beta regression method was found to perform well in conifer dominated study area located in central Finland. The same model shape, with basal area, tree height and an additional predictor (Scots pine: site fertility, Norway spruce: percentage of hardwoods) as independent variables, produced good results for both pine and spruce dominated sites. The models had reasonably high pseudo R-squared values (pine: 0.91, spruce: 0.87) and low standard errors (pine: 6.3%, spruce: 5.9%) for the fitting data, and also performed well in a cross validation test. The models were also tested on separate test plots located in a different geographical area, where the prediction errors were slightly larger (pine: 8.8%, spruce: 7.4%). In pine plots, the model fit was further improved by introducing additional predictors such as stand age and density. This improved also the performance of the models in the cross validation test, but weakened the results for the external data set. Our results indicated that the beta regression method offers a noteworthy alternative to separate canopy cover measurements, especially if time is limited and the models can be applied in the same region where the modelling data were collected.
  • Korhonen, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: lauri.korhonen@joensuu.fi (email)
  • Korhonen, Finnish Forest Research Institute, Joensuu Research Unit, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: ktk@nn.fi
  • Stenberg, Univ. of Helsinki, Dept of Forest Resource Management, P.O. BOX 27, FI-00014 University of Helsinki, Finland E-mail: ps@nn.fi
  • Maltamo, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: mm@nn.fi
  • Rautiainen, Univ. of Helsinki, Dept of Forest Resource Management, P.O. BOX 27, FI-00014 University of Helsinki, Finland E-mail: mr@nn.fi
article id 274, category Research article
Timo Saksa, Jari Miina. (2007). Cleaning methods in planted Scots pine stands in southern Finland: 4-year results on survival, growth and whipping damage of pines. Silva Fennica vol. 41 no. 4 article id 274. https://doi.org/10.14214/sf.274
Keywords: Pinus sylvestris; birch; competition; tending of sapling stand
Abstract | View details | Full text in PDF | Author Info
The effects of four cleaning treatments on the survival, growth of, and whipping damage to Scots pine (Pinus sylvestris L.) main stems were studied in young planted pine stands in southern Finland. Treatments were: no cleaning, point-cleaning of broadleaves (mainly birch, Betula pendula Roth and B. pubescens Ehrh.) within a radius of 1 m from the pine, topping of competing broadleaves, and total cleaning of broadleaves. A randomised complete block design with three replicates was established in five sapling stands: the mean height of the pines was 1.5 m in the three younger stands (6 or 7 years old), and 3 m in the two older stands (9 years old). Measurements taken four growing seasons later showed that in the younger stands, all cleaning treatments significantly (P < 0.05) decreased the mortality and increased the diameter increment of the pines. The height increment of the pines on point-cleaned and topped plots was significantly greater than on totally cleaned plots. In the older stands, the effects of cleaning treatments on the mortality and increment of pines were non-significant. In the younger and older stands, point-cleaning and total cleaning significantly reduced the whipping damage to pines, whereas the topping of competing broadleaves did not. The preliminary results support the use of point-cleaning in planted Scots pine stands when the mean height of the pines is about 1.5 m.
  • Saksa, Finnish Forest Research Institute, Suonenjoki Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: timo.saksa@metla.fi (email)
  • Miina, Finnish Forest Research Institute, Joensuu Unit, P.O.Box 68, FI-80101 Joensuu, Finland E-mail: jm@nn.fi
article id 273, category Research article
Stefan Mattson, Urban Bergsten, Tommy Mörling. (2007). Pinus contorta growth in boreal Sweden as affected by combined lupin treatment and soil scarification. Silva Fennica vol. 41 no. 4 article id 273. https://doi.org/10.14214/sf.273
Keywords: biomass; wood density; cultivation; lodgepole pine; lupinus; nitrogen inputs
Abstract | View details | Full text in PDF | Author Info
Effects of combining lupin (Lupinus nootkatensis L.) establishment and soil scarification on stem volume and stem biomass yield of lodgepole pine (Pinus contorta Dougl. var. latifolia Engelm.) were studied on a poor boreal site in Sweden 18 years after plantation. A field randomized block experiment was established with three different scarification techniques (disc trenching, moulding and ploughing) followed by establishment of lupins by either seeds or roots. There were three blocks without and two blocks with lupins. Overall, on average for the three soil scarification techniques, the lupin treatment significantly increased the volume per hectare by 102%.The lupin treatment significantly increased the stem volume per hectare by 236% for mounding and 139% for disc trenching, whereas the 55% increase for ploughing was not significant. The increase in the total stem biomass yield per tree was more pronounced for larger trees; 46% for average trees and 106% for dominant trees. However, there were no significant differences between scarification techniques for the lupin treatment in total stem biomass yield. Over the 18-year period, the increased growth rate following the lupin treatment resulted in a significantly decreased average stem basic wood density (on average 6%) for the sample trees. Because lupin is a nitrogen-fixing plant species, the large increase in tree growth following the lupin treatment was probably an effect of increased amount of nitrogen in the soil. The results indicate that use of lupin is a possible alternative to increase site productivity of lodgepole pine on poor boreal sites.
  • Mattson, Swedish University of Agricultural Sciences, Dept of Forest Ecology and Management, SE-901 83 Umeå, Sweden E-mail: sm@nn.se
  • Bergsten, Swedish University of Agricultural Sciences, Dept of Forest Ecology and Management, SE-901 83 Umeå, Sweden E-mail: ub@nn.se
  • Mörling, Swedish University of Agricultural Sciences, Dept of Forest Ecology and Management, SE-901 83 Umeå, Sweden E-mail: tommy.morling@ssko.slu.se (email)
article id 272, category Research article
Jonas Rönnberg, Mattias Berglund, Ulf Johansson. (2007). Incidence of butt rot at final felling and at first thinning of the subsequent rotation of Norway spruce stands in south-western Sweden. Silva Fennica vol. 41 no. 4 article id 272. https://doi.org/10.14214/sf.272
Keywords: Picea abies; consecutive rotations; disease transmission; Heterobasidion annosum; Heterobasidion parviporum; stump treatment
Abstract | View details | Full text in PDF | Author Info
The incidence of butt rot in Norway spruce stands at final felling and at first thinning of the subsequent rotation was investigated at 20 sites in south-western Sweden. There was a negative correlation between the incidence at first thinning and the basal area of decayed trees at final felling. Using incidence of decay or basal area of decayed trees to predict disease transfer between rotations is difficult and requires the inclusion of several factors, making predictions uncertain. The level of infection found at final felling in this study varied between 7 and 71.8%, indicating that the risk of spore infection transfer to the next rotation was probably quite low. Long-term experiments are required to reveal the effect of stump treatment on disease transmission between rotations.
  • Rönnberg, SLU, Southern Swedish Forest Research Centre, P.O. Box 49, SE-23053 Alnarp, Sweden E-mail: jonas.ronnberg@ess.slu.se (email)
  • Berglund, SLU, Southern Swedish Forest Research Centre, P.O. Box 49, SE-23053 Alnarp, Sweden E-mail: mb@nn.se
  • Johansson, Tönnersjöheden Experimental Forest, P.O. Box 17, SE-31038 Simlångsdalen, Sweden E-mail: uj@nn.se
article id 271, category Research article
Patrick Insinna, Risto Jalkanen, Bernhard Götz. (2007). Climate impact on 100-year foliage chronologies of Scots pine and Ponderosa pine in the northeast lowlands of Brandenburg, Germany. Silva Fennica vol. 41 no. 4 article id 271. https://doi.org/10.14214/sf.271
Keywords: Scots pine; needle trace method; climate impact; foliage parameters; Ponderosa pine
Abstract | View details | Full text in PDF | Author Info
Due to differences in the high-frequency signal and mean sensitivity of needle parameters in Scots pine and Ponderosa pine revealed in previous investigations, variance caused by climate factors at a dry site in the northeast lowlands of Brandenburg was investigated. Although water is the general limiting factor for both tree species, there are evident differences in the climate-driven impact on individual needle parameters. Autumn precipitation of the previous year was equally important for Scots pine and Ponderosa pine, but summer precipitation was more significant for the needle parameters of Scots pine. In contrast to precipitation, temperature seems to have a minor impact on needle parameters. Although January temperatures are significant predictors for both species, intercorrelations between needle parameters and summer temperatures were found only for Ponderosa pine. Striking correlation was also found between sun activity and needle production in Ponderosa pine, but not Scots pine, indicating possible adaptation to solar radiation.
  • Insinna, Office for Environmental Protection Liechtenstein, Climate Change Division, P.O. Box 684, FL-9490 Vaduz, Liechtenstein E-mail: patrick.insinna@aus.llv.li (email)
  • Jalkanen, Rovaniemi Research Unit, Finnish Forest Research Institute, P.O. Box 16, FI-96301 Rovaniemi, Finland E-mail: rj@nn.fi
  • Götz, Eberswalde University of Applied Sciences, Department of Forestry, Forest-Botanical Gardens, D-16225 Eberswalde, Germany E-mail: bg@nn.de
article id 471, category Research article
Michael Vohland, Johannes Stoffels, Christina Hau, Gebhard Schüler. (2007). Remote sensing techniques for forest parameter assessment: multispectral classification and linear spectral mixture analysis. Silva Fennica vol. 41 no. 3 article id 471. https://doi.org/10.14214/sf.471
Keywords: Picea abies; remote sensing; stand variables; stem number; multispectral classification; Linear Spectral Mixture Analysis
Abstract | View details | Full text in PDF | Author Info
One of the most common applications of remote sensing in forestry is the production of thematic maps, depicting e.g. tree species or stand age, by means of image classification. Nevertheless, the absolute quantification of stand variables is even more essential for forest inventories. For both issues, satellite data are attractive for their large-area and up-to-date mapping capacities. This study followed two steps, and at first a supervised parametric classification was performed for a German test site based on a radiometrically corrected Landsat-5 TM scene. There, eight forest classes were identified with an overall accuracy of 87.5%. In the following, the study focused on the estimation of one key stand variable, the stem number per hectare (SN), which was carried out for a number of Norway spruce stands that had been clearly identified in the multispectral classification. For the estimation of SN, the approach of Linear Spectral Mixture Analysis (LSMA) was found to be clearly more effective than spectral indices. LSMA is based on the premise that measured reflectances can be linearly modelled from a set of so-called endmember spectra. In this study, the endmember sets were held variable to decompose pixel values to abundances of a vegetation, a background (soil, litter, bark) and a shade fraction. Forest structure determines the visible portions of these fractions, and therefore, a multiple regression using them as predictor variables provided the best SN estimates. LSMA allows a pixel-by-pixel quantification of SN for complete satellite images. This opens the view to exploit these data for an improved calibration of large-scale multi-parameter assessment strategies (e.g. statistical modelling or the kNN method for satellite data interpretation).
  • Vohland, University of Trier, Faculty of Geography and Geosciences, Remote Sensing Department, Trier, Germany E-mail: mv@nn.de (email)
  • Stoffels, University of Trier, Faculty of Geography and Geosciences, Remote Sensing Department, Trier, Germany E-mail: js@nn.de
  • Hau, University of Trier, Faculty of Geography and Geosciences, Remote Sensing Department, Trier, Germany E-mail: ch@nn.de
  • Schüler, Research Institution for Forest Ecology and Forestry (FAWF), Department of Forest Growth and Silviculture, Trippstadt, Germany E-mail: gs@nn.de
article id 286, category Research article
Riitta Hänninen, A. Maarit I. Kallio. (2007). Economic impacts on the forest sector of increasing forest biodiversity conservation in Finland. Silva Fennica vol. 41 no. 3 article id 286. https://doi.org/10.14214/sf.286
Keywords: forest biodiversity conservation; roundwood market; forest industry production
Abstract | View details | Full text in PDF | Author Info
In the next coming years, political decisions will be made upon future actions to safeguard forest biodiversity in Southern Finland. We address the economic consequences on the Finnish forest sector of conserving additional 0.5% to 5% of the old growth forest land in Southern Finland. The impacts on supply, demand and prices of wood and forest industry production are analysed employing a partial equilibrium model of the Finnish forest sector. An increase in conservation raises wood prices and thus the production costs of the forest industry. This makes sawnwood production fall, but does not affect paper and paperboard production. The forest owners’ aggregated wood sales income is unaffected or slightly increased, because an increase in stumpage prices offsets the decrease in the harvests. If conservation increases wood imports, negative effects on forest industry become smaller whereas aggregated forest owners’ income may decline depending on the magnitude of import substitution.
  • Hänninen, Finnish Forest Research Institute, Unioninkatu 40 A, FI-00170 Helsinki, Finland E-mail: riitta.hanninen@metla.fi (email)
  • Kallio, Finnish Forest Research Institute, Unioninkatu 40 A, FI-00170 Helsinki, Finland E-mail: maarit.kallio@metla.fi
article id 285, category Research article
Heli Peltola, Antti Kilpeläinen, Kari Sauvala, Tommi Räisänen, Veli-Pekka Ikonen. (2007). Effects of early thinning regime and tree status on the radial growth and wood density of Scots pine. Silva Fennica vol. 41 no. 3 article id 285. https://doi.org/10.14214/sf.285
Keywords: thinning response; ring width; early wood; late wood; intra-ring wood density; X-ray densitometry
Abstract | View details | Full text in PDF | Author Info
  • Peltola, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: heli.peltola@joensuu.fi (email)
  • Kilpeläinen, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: ak@nn.fi
  • Sauvala, Finnish Forest Research Institute, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: ks@nn.fi
  • Räisänen, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: tr@nn.fi
  • Ikonen, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: vpi@nn.fi
article id 284, category Research article
Tuomo Nurminen, Jaakko Heinonen. (2007). Characteristics and time consumption of timber trucking in Finland. Silva Fennica vol. 41 no. 3 article id 284. https://doi.org/10.14214/sf.284
Keywords: logistics; cut-to-length operations; time study; work phases; log-normal distribution
Abstract | View details | Full text in PDF | Author Info
Cost efficiency and flexibility have become increasingly important in the logistics of cut-to-length harvesting operations. At the same time, the operating conditions for long-distance transportation have become more demanding and variable. Since the number of log products has increased and the size of harvesting sites has decreased, loads of timber must increasingly be collected from several log decks, increasing the time consumption and costs of the trucking operation. The objectives of this study were to formulate time-consumption models for typical timber transportation activities in Finland and introduce a statistical procedure for examining the variation in time consumption during the trucking phases. The study used a combination of time studies and follow-up studies based on empirical data for 368 loads (a total volume of nearly 18 000 m3) collected from one wood procurement district in central Finland. The model included the following explanatory factors: driving distance, number of log decks, log product and load volume. Since transportation includes several phases and since many factors affect the work performance, significant variation in the total transportation time was observed. This makes planning and cost accounting more difficult. The models developed in this study are a promising initial tool to support route planning and optimization, and cost and profitability calculations for trucking entrepreneurs and the forest industry.
  • Nurminen, University of Joensuu, Faculty of Forest Sciences; Forest Agency Tuomo Nurminen, Joensuuntie 5 B 8, FI-41800 Korpilahti, Finland E-mail: tn@nn.fi (email)
  • Heinonen, Finnish Forest Research Institute, Joensuu Research Unit, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: jh@nn.fi
article id 283, category Research article
Ilkka Korpela, Tuukka Tuomola, Esko Välimäki. (2007). Mapping forest plots: an efficient method combining photogrammetry and field triangulation. Silva Fennica vol. 41 no. 3 article id 283. https://doi.org/10.14214/sf.283
Keywords: remote sensing; least squares adjustment; intertree positioning; spatial resection; trilateration
Abstract | View details | Full text in PDF | Author Info
Intra stand spatial information is often collected in ecological investigations, when functioning or interactions in the ecosystem are studied. Local relative accuracy is often given priority in such cases. Forest maps with accurate absolute positions in a global coordinate system are needed in remote-sensing applications for validation and calibration purposes. Establishing the absolute position is particularly difficult under a canopy as is creating undistorted coordinate systems for large plots in the forest. We present a method that can be used for the absolute mapping of point features under a canopy that is efficient for large forest plots. In this method, an undistorted network of control points is established in the forest using photogrammetric observations of treetops. These points are used for the positioning of other points, using redundant observations of interpoint distances and azimuths and a least squares adjustment. The method provides decimetre-level accuracy and only one person is required to conduct the work. An estimate of the positioning accuracy of each point is readily available in the field. We present the method, a simulation study that explores the potential of the method and results from an experiment in a mixed boreal stand in southern Finland.
  • Korpela, University of Helsinki, Department of Forest Resource Management, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: ilkka.korpela@helsinki.fi (email)
  • Tuomola, University of Helsinki, Department of Forest Resource Management, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: tt@nn.fi
  • Välimäki, University of Helsinki, Department of Forest Resource Management, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: ev@nn.fi
article id 282, category Research article
Annika Kangas, Lauri Mehtätalo, Matti Maltamo. (2007). Modelling percentile based basal area weighted diameter distribution. Silva Fennica vol. 41 no. 3 article id 282. https://doi.org/10.14214/sf.282
Keywords: stand structure; diameter distribution; prediction; interpolation
Abstract | View details | Full text in PDF | Author Info
In percentile method, percentiles of the diameter distribution are predicted with a system of models. The continuous empirical diameter distribution function is then obtained by interpolating between the predicted values of percentiles. In Finland, the distribution is typically modelled as a basal-area weighted distribution, which is transformed to a traditional density function for applications. In earlier studies it has been noted that when calculated from the basal-area weighted diameter distribution, the density function is decreasing in most stands, especially for Norway spruce. This behaviour is not supported by the data. In this paper, we investigate the reasons for the unsatisfactory performance and present possible solutions for the problem. Besides the predicted percentiles, the problems are due to implicit assumptions of diameter distribution in the system. The effect of these assumptions can be somewhat lessened with simple ad-hoc methods, like increasing new percentiles to the system. This approach does not, however, utilize all the available information in the estimation, namely the analytical relationships between basal area, stem number and diameter. Accounting for these, gives further possibilities for improving the results. The results show, however, that in order to achieve further improvements, it would be recommendable to make the implicit assumptions more realistic. Furthermore, height variation within stands seems to have an important contribution to the uncertainty of some forest characteristics, especially in the case of sawnwood volume.
  • Kangas, Department of Forest Resources Management, P.O.Box 27, FI-00014 University of Helsinki, Finland E-mail: ak@nn.fi (email)
  • Mehtätalo, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: lm@nn.fi
  • Maltamo, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: mm@nn.fi
article id 281, category Research article
Florence Renou-Wilson, Edward P. Farrell. (2007). The use of foliage and soil information for managing the nutrition of Sitka and Norway spruce on cutaway peatlands. Silva Fennica vol. 41 no. 3 article id 281. https://doi.org/10.14214/sf.281
Keywords: fertilization; Picea abies; foliar analysis; long-term trend; Picea sitchensis; cutaway peatland
Abstract | View details | Full text in PDF | Author Info
This investigation focuses on the development and nutrient status of the first Sitka spruce and Norway spruce stands established on milled cutaway peatlands in Ireland in the late 1980s and early 1990s. Phosphatic fertilization at planting is critical for the establishment of trees on cutaway peatlands but may not be sufficient to see the stands close canopy. Results from this study indicate the likely demand for P and N fertilizer during the rotation of these plantations. During the ten-year-study period (1994–2004), the nutrient status of both Norway and Sitka spruce stands deteriorated with the passage of time. Twenty-seven out of the twenty-eight examined stands became P deficient before 10 years old and half of the plots were N deficient within 13 to 15 years. Sitka spruce stands became N and P deficient earlier than Norway spruce. Regardless of species, tree stands growing on Sphagnum peat entered the critical N deficiency threshold sooner and were all severely deficient by 2004 compared to 22% of the trees growing on Phragmites peat. The effects of aerial re-fertilization were also site specific and although P deficiency was cured, the trees were likely to suffer from nutrient imbalance (N and Cu especially). These results demand a change of standard fertilization practices, which should be related more specifically to peat type and species requirements. Peat type identification and foliar analysis monitoring should become standard management tools while the long-term continuous monitoring of these new forests would be very valuable throughout their first rotation.
  • Renou-Wilson, University College Dublin, Dublin, Ireland E-mail: frw@nn.ie (email)
  • Farrell, University College Dublin, Dublin, Ireland E-mail: epf@nn.ie
article id 280, category Research article
Mika Nieminen, Mikko Moilanen, Sirpa Piirainen. (2007). Phosphorus allocation in surface soil of two drained peatland forests following wood and peat ash application – why effective adsorption on low sorptive soils? Silva Fennica vol. 41 no. 3 article id 280. https://doi.org/10.14214/sf.280
Keywords: forestry; ash fertilization; peat; aluminium; iron; phosphorus adsorption; phosphorus fractionation
Abstract | View details | Full text in PDF | Author Info
Fertilization of drained peatland forests with wood ash and different commercial phosphorus fertilizers (calcium phosphates) generally give similar stand growth responses. However, it has been shown that use of calcium phosphate fertilizers generally lead to highly increased P release to recipient water courses. On the other hand, no corresponding release has been reported after ash fertilization. Soil samples from the surface peats from a nutrient poor and a fertile drained peatland site were collected before and 1–4 years after application of five different types of ash products. The changes over time in the different chemical forms of P in the substrate were studied. The results indicated that the reason for the low liability to leaching of ash fertilizers was that significant amounts of P are adsorbed by Al and Fe during weathering of the ash fertilizers. However, further studies are needed to clarify whether the adsorption of P occurs with the Al and Fe of the ash or the native Al and Fe compounds present in soil before ash fertilization.
  • Nieminen, Finnish Forest Research Institute, Vantaa Research Unit, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: mika.nieminen@metla.fi (email)
  • Moilanen, Finnish Forest Research Institute, Vantaa Research Unit, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: mm@nn.fi
  • Piirainen, Finnish Forest Research Institute, Vantaa Research Unit, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: sp@nn.fi
article id 303, category Research article
Lars Lönnstedt. (2007). Industrial timberland ownership in the USA: arguments based on case studies. Silva Fennica vol. 41 no. 2 article id 303. https://doi.org/10.14214/sf.303
Keywords: forest management; backward vertical integration; pricing; secured supply; owner structure
Abstract | View details | Full text in PDF | Author Info
The forest product companies’ ownership of timberland is decreasing in the United States as in many other countries. In aggregate the forest product industry owned 26.5 million hectares (11.6% of the U.S. timberland) in 2002 compared with 28.5 million hectares in 1987 (FIA 2006). Reasons for this decrease of timberland ownership are several and complex. This article presents four case studies of U.S.-based forest product companies. The vertical integration theory and empirical studies about timberland ownership give a base for the study. Four hypotheses are formulated on the basis of the literature. The results give support to two of them. An important reason for timberland ownership is a wish to secure deliveries. Market conditions are important for the need of owning timberland. Two of the companies did not own timberland, the main reason being more profitable alternative uses of capital. The ownership structure of the company, tradition, and culture are other important explanations for timberland ownership. This study did not show the advantage of timberland ownership for information and coordination.
  • Lönnstedt, SLU, Department of Forest Products, P.O. Box 7060, SE 750 07 Uppsala, Sweden E-mail: lars.lonnstedt@spm.slu.se (email)
article id 302, category Research article
Gökay Nemli, Turgay Akbulut, Emir Zekoviç. (2007). Effects of some sanding factors on the surface roughness of particleboard. Silva Fennica vol. 41 no. 2 article id 302. https://doi.org/10.14214/sf.302
Keywords: particleboard; sanding; surface roughness; power; grit size; feeding speed
Abstract | View details | Full text in PDF | Author Info
Effects of the grit sizes of the sand belt, feeding speed and the feed power of the heads of the sander on the surface roughness of the particleboard panels were investigated. Two surface roughness parameters, average roughness (Ra) and mean peak-to-valley height (Rz), obtained from board surfaces were used in the analysis. Sanding factors were found to have a significant effect on the surface roughness of the particleboard. Better results were obtained with 40 m/min of feeding speed, 40-60-80-120 of grit sizes, and 67 kW of the feed power of the heads of the sander.
  • Nemli, Karadeniz Technical University, Faculty of Forestry, Trabzon-Türkiye E-mail: nemli@ktu.edu.tr (email)
  • Akbulut, Istanbul University, Faculty of Forestry, Istanbul-Türkiye E-mail: ta@nn.tr
  • Zekoviç, Starwood Forest Product Company, Production Manager, Bursa-Türkiye E-mail: ez@nn.tr
article id 301, category Research article
Sanni Raiskila, Minna Pulkkinen, Tapio Laakso, Kurt Fagerstedt, Mia Löija, Riitta Mahlberg, Leena Paajanen, Anne-Christine Ritschkoff, Pekka Saranpää. (2007). FTIR spectroscopic prediction of Klason and acid soluble lignin variation in Norway spruce cutting clones. Silva Fennica vol. 41 no. 2 article id 301. https://doi.org/10.14214/sf.301
Keywords: Norway spruce; FTIR; lignin; PCR; principal component regression
Abstract | View details | Full text in PDF | Author Info
Our purpose was to develop a FTIR spectroscopic method to be used to determine the lignin content in a large number of samples and to apply this method studying variation in sapwood and heartwood lignin content between three fast-growing cutting clones grown in three sites. Models were estimated with 18 samples and tested with 6 samples for which the Klason lignin + acid soluble lignin content had been determined. Altogether 272 candidate models were built with all-subset regressions from the principal components estimated from differently treated transmission spectra of the samples; the spectra were recorded on KBr pellets of sieved and unsieved unextracted wood powder and subjected to four different preprocessings and two different wavenumber selection schemes. The final model showed an adequate fit in the estimation data (R2 = 0.74) as well as a good prediction performance in the test data (R2P = 0.90). This model was based on the wavenumber range of 1850–500 cm–1 of the line-subtraction-normalised spectra recorded from sieved samples. The model was used to predict lignin content in 64 samples of the same material. One of the clones had a slightly lower sapwood lignin content than the two other clones. The fertile growing site with fast growing trees showed slightly higher sapwood lignin content compared with the other two sites. The model was also used to predict the lignin content in the earlywood of 45 individual annual rings. Variation between individual stems and between annual rings was found to be large. No correlation was found between the lignin content and density of earlywood.
  • Raiskila, Finnish Forest Research Institute, Vantaa Research Unit, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: sr@nn.fi
  • Pulkkinen, Department of Forest Ecology, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: mp@nn.fi
  • Laakso, Finnish Forest Research Institute, Vantaa Research Unit, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: tl@nn.fi
  • Fagerstedt, Department of Biological and Environmental Sciences, Plant Biology, P.O. Box 65, FI-00014 University of Helsinki, Finland E-mail: kf@nn.fi
  • Löija, VTT Building and Transport, P.O. Box 1806, FI-02044 VTT, Finland E-mail: ml@nn.fi
  • Mahlberg, VTT Building and Transport, P.O. Box 1806, FI-02044 VTT, Finland E-mail: rm@nn.fi
  • Paajanen, VTT Building and Transport, P.O. Box 1806, FI-02044 VTT, Finland E-mail: lp@nn.fi
  • Ritschkoff, VTT Building and Transport, P.O. Box 1806, FI-02044 VTT, Finland E-mail: acr@nn.fi
  • Saranpää, Finnish Forest Research Institute, Vantaa Research Unit, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: pekka.saranpaa@metla.fi (email)
article id 300, category Research article
Jouni Siipilehto, Sakari Sarkkola, Lauri Mehtätalo. (2007). Comparing regression estimation techniques when predicting diameter distributions of Scots pine on drained peatlands. Silva Fennica vol. 41 no. 2 article id 300. https://doi.org/10.14214/sf.300
Keywords: Pinus sylvestris; drained peatland; dbh distribution; Johnson’s SB function; regression estimation methods
Abstract | View details | Full text in PDF | Author Info
We compared different statistical methods for fitting linear regression models to a longitudinal data of breast height diameter (dbh) distributions of Scots pine dominated stands on drained peatlands. The parameter prediction methods for two parameters of Johnson’s SB distribution, fitted to basal-area dbh distributions, were: 1) a linear model estimated by ordinary least squares (OLS), 2) a multivariate linear model estimated using the seemingly unrelated regression approach (SUR), 3) a linear mixed-effects model with random intercept (MIX), and 4) a multivariate mixed-effects model (MSUR). The aim was to clarify the effect of taking into account the hierarchy of the data, as well as simultaneous estimation of the correlated dependent variables on the model fit and predictions. Instead of the reliability of the predicted parameters, we focused on the reliability of the models in predicting stand conditions. Predicted distributions were validated in terms of bias, RMSE, and error deviation in the generated quantities of the growing stock. The study material consisted of 112 successively measured stands from 12 experimental areas covering the whole of Finland (total of 608 observations). Two independent test data sets were used for model validation. All the advanced regression techniques were superior to OLS, when exactly the same independent stand variables were included. SUR and MSUR were ranked the overall best and second best, respectively. Their ranking was the same in the modeling data, whereas MSUR was superior in the peatland test data and SUR in the mineral soil test data. The ranking of the models was logical, but may not be widely generalized. The SUR and MSUR models were considered to be relevant tools for practical forest management planning purposes over a variety of site types and stand structures.
  • Siipilehto, Finnish Forest Research Institute, Vantaa Research Unit, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: jouni.siipilehto@metla.fi (email)
  • Sarkkola, Finnish Forest Research Institute, Vantaa Research Unit, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: ss@nn.fi
  • Mehtätalo, University of Joensuu, Faculty of Forestry, P.O. Box 111, 80101 Joensuu, Finland E-mail: lm@nn.fi
article id 299, category Research article
Hongcheng Zeng, Timo Pukkala, Heli Peltola, Seppo Kellomäki. (2007). Application of ant colony optimization for the risk management of wind damage in forest planning. Silva Fennica vol. 41 no. 2 article id 299. https://doi.org/10.14214/sf.299
Keywords: harvest scheduling; heuristics; genetic algorithms; simulated annealing; spatial optimization
Abstract | View details | Full text in PDF | Author Info
Ant colony optimization (ACO) is still quite a new technique and seldom used in the field of forest planning compared to other heuristics such as simulated annealing and genetic algorithms. This work was aimed at evaluating the suitability of ACO for optimizing the clear-cut patterns of a forest landscape when aiming at simultaneously minimizing the risk of wind damage and maintaining sustainable and even flow of periodical harvests. For this purpose, the ACO was first revised and the algorithm was coded using the Visual Basic Application of the ArcGIS software. Thereafter, the performance of the modified ACO was demonstrated in a forest located in central Finland using a 30-year planning period. Its performance was compared to simulated annealing and a genetic algorithm. The revised ACO performed logically since the objective function value was improving and the algorithm was converging during the optimization process. The solutions maintained a quite even periodical harvesting timber while minimizing the risk of wind damage. Implementing the solution would result in smooth landscape in terms of stand height after the 30-year planning period. The algorithm is quite sensitive to the parameters controlling pheromone updating and schedule selecting. It is comparable in solution quality to simulated annealing and genetic algorithms.
  • Zeng, University of Joensuu, Faculty of Forest Sciences, P. O. Box 111, FI-80101 Joensuu, Finland E-mail: hongcheng.zeng@joensuu.fi (email)
  • Pukkala, University of Joensuu, Faculty of Forest Sciences, P. O. Box 111, FI-80101 Joensuu, Finland E-mail: tp@nn.fi
  • Peltola, University of Joensuu, Faculty of Forest Sciences, P. O. Box 111, FI-80101 Joensuu, Finland E-mail: hp@nn.fi
  • Kellomäki, University of Joensuu, Faculty of Forest Sciences, P. O. Box 111, FI-80101 Joensuu, Finland E-mail: sk@nn.fi
article id 298, category Research article
Ulfstand Wennström, Urban Bergsten, Jan-Erik Nilsson. (2007). Seedling establishment and growth after direct seeding with Pinus sylvestris: effects of seed type, seed origin, and seeding year. Silva Fennica vol. 41 no. 2 article id 298. https://doi.org/10.14214/sf.298
Keywords: Scots pine; direct seeding; orchard seed; stand seed
Abstract | View details | Full text in PDF | Author Info
The early effects of seed type, seed origin, and seeding year on seedling emergence, survival, and growth after one to four years was quantified and examined. Two experimental series of Scots pine located at 61°N and 64°N and six orchard seed lots and six stand seed lots of adequate geographical origins in each series were used. Both series were replicated at five sites for up to five years. On average, orchard seed lots had 16% and 12% higher seedling emergence, in relation to sown germinable seeds, than stand seed lots in the northern and southern series. The survival from year 1 to year 4 was also higher for orchard seedlings than for stand seedlings; there was a 77% and 72% survival rate in the northern series and a 58% and 49% survival rate in the southern series for orchard and stand seedlings respectively. On average, after four years orchard seedlings were 26% taller in the northern series and 13% taller in the southern series. The gain in height growth for the orchard seeds was positive at all seeding years, at all sites, and at all seedling ages. If survival was calculated to the height of a four-year-old seedling, the survival of orchard seedlings increased by 3% in the northern and 1% in the southern series as the result of the higher growth of orchard seedlings. Using orchard seeds resulted in 6 percent units higher growth gain when the clear cuts were regenerated with direct seeding than with plants using the same seed material. Changes in the ranking of seed lots and seed types at different sites and seeding years for seedling emergence is an effect of external factors such as grazing and foraging that cannot be related directly to the tested factors.
  • Wennström, Skogforsk, Box 3, SE-918 21 Sävar, Sweden E-mail: ulfstand.wennstrom@skogforsk.se (email)
  • Bergsten, SLU, Dept. of Forest Ecology and Management, SE-901 83 Umeå, Sweden & SLU, Vindeln Experimental Forest, SE-922 91 Vindeln, Sweden E-mail: ub@nn.se
  • Nilsson, SLU, Dept. of Forest Genetics and Plant Physiology E-mail: jen@nn.se
article id 297, category Research article
Antti Marjokorpi, Jukka Salo. (2007). Operational standards and guidelines for biodiversity management in tropical and subtropical forest plantations – How widely do they cover an ecological framework? Silva Fennica vol. 41 no. 2 article id 297. https://doi.org/10.14214/sf.297
Keywords: criteria and indicators; afforestation; conservation; sustainable forest management; reforestation
Abstract | View details | Full text in PDF | Author Info
The development of standards and guidelines to secure sustainable forest management at different geographical scales has expanded greatly during the past fifteen years. Most of these efforts, however, have been formulated for natural forests only; those designed specifically for forest plantations are relatively few. The global forest plantation area is expanding rapidly, with obvious positive and negative impacts on biodiversity. We characterize the key concepts of biodiversity in tropical and subtropical forest plantations and present an analysis of how these elements are covered in the eight principal operational standards and guidelines for sustainable plantation forestry. We also examine the applicability of standards and guidelines in plantations established and managed under different initial settings. The results indicate that the standards and guidelines address certain key elements of biodiversity comprehensively, meanwhile others are ignored or receive only slight attention. There is also substantial variation between the sets in their nature (performance- vs. process-based), scope, congruity in concepts and hierarchy, and specificity. The standards and guidelines seldom take into account the varying initial settings for plantation establishment and the consequent variation in critical factors in biodiversity conservation and management. We recommend that standards and guidelines should be developed so as to pay more attention to the type and operating environment of plantations, to cover all key factors of biodiversity, and to consider building closer relationships between the social and ecological aspects of biodiversity.
  • Marjokorpi, Stora Enso, Wood Supply, Talvikkitie 40 C, FI-01300 Vantaa, Finland E-mail: antti.marjokorpi@storaenso.com (email)
  • Salo, Department of Biology, University of Turku, FI-20140 Turku, Finland E-mail: js@nn.fi
article id 296, category Research article
Samuel Roturier, Sofia Bäcklund, Maria Sundén, Urban Bergsten. (2007). Influence of ground substrate on establishment of reindeer lichen after artificial dispersal. Silva Fennica vol. 41 no. 2 article id 296. https://doi.org/10.14214/sf.296
Keywords: mineral soil; bark; Cladina mitis; image analysis; lichen colonization; moss; thallus; twigs
Abstract | View details | Full text in PDF | Author Info
Methods to improve the recovery of reindeer lichen after soil disturbance or overgrazing are being sought for areas where reindeer are herded. The effects of four substrates – mineral soil, moss, twigs and pine bark – on the establishment of lichen fragments after total removal of the vegetation were thus studied in a middle-aged pine stand and a clear-cut, both located in a lichen-rich pine-heath. Cladina mitis fragments of two sizes were manually dispersed in 1 m2 quadrats and their movements from their respective dispersal points were registered after one year. The natural re-establishment of lichens in the quadrats was monitored over three years by using digital pictures. In the forest stand, no significant differences were detected in either the fragment movement or the lichen establishment between the different substrates, but the fragment size had positive effects on both parameters. In the clear-cut, the moss substrate was the most suitable not only for the artificially dispersed lichens to fasten to, but also for the natural settlement of lichens from the surrounding lichen mat. More lichen thalli fastened to the bark and twigs substrates than to the mineral soil, but the settlement of lichens from the surrounding was greater on bare mineral soil substrate. The results indicate that artificial dispersal of lichen thalli on an appropriate substrate could be a successful strategy for promoting lichen recovery.
  • Roturier, SLU, Vindeln Experimental Forests, Svartberget Fältstation, SE-922 91 Vindeln, Sweden E-mail: samuel.roturier@esf.slu.se (email)
  • Bäcklund, E-mail: sb@nn.se
  • Sundén, E-mail: ms@nn.se
  • Bergsten, SLU, Dept of Forest Ecology, SE-901 83 Umeå, Sweden E-mail: ub@nn.se
article id 295, category Research article
Pekka Kaitaniemi, Janne Riihimäki, Julia Koricheva, Harri Vehviläinen. (2007). Experimental evidence for associational resistance against the European pine sawfly in mixed tree stands. Silva Fennica vol. 41 no. 2 article id 295. https://doi.org/10.14214/sf.295
Keywords: stand structure; natural enemies; species diversity; tri-trophic interactions
Abstract | View details | Full text in PDF | Author Info
This study examined whether the saplings of Scots pine (Pinus sylvestris) exhibit associational resistance against the European pine sawfly Neodiprion sertifer (Hymenoptera, Diprionidae) when grown in a mixture with 50% silver birch (Betula pendula). The number of sawflies on pine trees in pure and mixed stands was manipulated at two experimental sites during two years. Survival of larvae and eggs was monitored, and the numbers of presumed sawfly predators were counted. A lower proportion of sawfly larvae and eggs survived on pines grown in the mixture with birch as compared with pure pine stands. Lower survival of sawfly larvae in the mixed stands was associated with the higher abundance of ants in these stands. The numbers of other sawfly predators (e.g. spiders and predatory heteropterans) differed between the study sites and were negatively associated with the presence of ants, which suggests possible interference between these groups. Although sawfly survival was lower on pines in the mixed stands, providing evidence of associational resistance, a related study shows the same trees had a higher number of ant-tended aphid colonies as compared with pines in the pure stands. Therefore, instead of considering resistance against individual herbivore species, it seems more practical to use associational resistance as a trait representing the resistance of larger systems, such as whole tree stands, against the total damage caused by herbivores in general.
  • Kaitaniemi, Hyytiälä Forestry Field Station, University of Helsinki, Hyytiäläntie 124, FI-35500 Korkeakoski, Finland E-mail: pk@nn.fi (email)
  • Riihimäki, Section of Ecology, Department of Biology, University of Turku, FI-20014 Turku, Finland E-mail: jr@nn.fi
  • Koricheva, School of Biological Sciences, Royal Holloway, University of London, Egham, Surrey, TW20 0EX, UK E-mail: jk@nn.uk
  • Vehviläinen, Section of Ecology, Department of Biology, University of Turku, FI-20014 Turku, Finland E-mail: hv@nn.fi
article id 294, category Research article
Ülle Püttsepp, Krista Lõhmus, Andres Koppel. (2007). Decomposition of fine roots and α-cellulose in a short rotation willow (Salix spp.) plantation on abandoned agricultural land. Silva Fennica vol. 41 no. 2 article id 294. https://doi.org/10.14214/sf.294
Keywords: decomposition; α-cellulose; fine roots; acid detergent lignin; short rotation forest; Salix spp.
Abstract | View details | Full text in PDF | Author Info
Decomposition of fine roots (<1 mm in diameter) of the clones of Salix viminalis, S. dasyclados and α-cellulose sheets (50 x 10 x 1 mm) was studied in a 6-years old Salix spp. plantation established on abandoned agricultural land in Estonia. The substrates were incubated in litterbags (mesh size 0.14 mm) in 5–10 cm topsoil, in non-fertilised plots for one year. Changes in the ash-free weight of the fine roots were best described by negative exponential models (S. viminalis R2 = 0.98, S. dasyclados R2 = 0.96), and by a linear model for α-cellulose (R2 = 0.63). The sheets of α-cellulose decomposed roughly twice as rapidly as the fine roots (S. viminalis k = 0.325, S. dasyclados k = 0.165). The remaining (of the initial) ash-free weights of the fine roots were 73.3 ± 0.8% (mean ± SE) and 85.8 ± 2.2% respectively, and of the α-cellulose 35.9 ± 8.5%, in the end of the one year of decomposition. The amount of acid detergent (AD) lignin in the fine-roots of S. viminalis increased significantly and did not change in S. dasyclados, suggesting higher activity of microbial decomposers in the first substrate. Of the studied quality parameters, the AD lignin was the major factor determining the different rate of decomposition of the fine roots of S. viminalis and S. dasyclados. Nitrogen was recycled in the fine root sub-system in both Salix species. This knowledge can be applied in the management of Salix plantations, aimed at bioenergy production.
  • Püttsepp, Department of Ecology, Swedish University of Agricultural Sciences, P.O. Box 7072, SE-75007 Uppsala, Sweden; Estonian University of Life Sciences, Kreuzwaldi 64, Tartu 51014, Estonia E-mail: ulle.puttsepp@ekol.slu.se (email)
  • Lõhmus, Institute of Geography, University of Tartu, Vanemuise 46, Tartu 51014, Estonia E-mail: kl@nn.ee
  • Koppel, Estonian University of Life Sciences, Kreuzwaldi 64, Tartu 51014, Estonia E-mail: ak@nn.ee
article id 293, category Research article
Conor O'Reilly, Norberto De Atrip. (2007). Seed moisture content during chilling and heat stress effects after chilling on the germination of common alder and downy birch seeds. Silva Fennica vol. 41 no. 2 article id 293. https://doi.org/10.14214/sf.293
Keywords: Betula pubescens; Alnus glutinosa; germination temperature; stress; moist chilling
Abstract | View details | Full text in PDF | Author Info
The effects of seed moisture content (MC) and heat treatment on the germination response of common alder (Alnus glutinosa) and downy birch (Betula pubescens) seeds were examined. Seeds of each species were adjusted to MC of 7% to 50% MC, then chilled for up to 36 weeks, after which they were allowed to germinate at 15°C with 8 hours lighting per day or 20 (dark)/ 30°C (light). Seed lot effects were evident, but treatment effects were consistent in each lot and species. The response to moist chilling treatments was larger at 15°C than at 20/30°C. Chilling had no effect on germination unless seed MC was >15%, but it was low also at 20% MC. The highest germination was achieved following 24–36 weeks chilling at the optimum or target MC (TMC) levels of about 30% in alder and 35% in birch. In a separate experiment, seeds were fully imbibed (FI) (~50% MC; standard method used in operational practice) or adjusted to TMC levels, after which some seeds of each treatment group were chilled to release dormancy. Following this, the seeds were dried back to TMC levels and then subjected to 60°C for up to 4 hours after which they were allowed germinate under the same conditions described above. Heat treatment damaged the prechilled FI seeds, but no damage occurred to the non-chilled seeds. However, heat stress stimulated germination in the non-chilled FI seeds of both species and the TMC seeds of alder.
  • O'Reilly, UCD School of Biology and Environmental Science, UCD College of Life Sciences, University College Dublin, Belfield, Dublin 4, Ireland E-mail: conor.oreilly@ucd.ie (email)
  • De Atrip, UCD School of Biology and Environmental Science, UCD College of Life Sciences, University College Dublin, Belfield, Dublin 4, Ireland E-mail: nda@nn.ie
article id 292, category Research article
Sanna Susiluoto, Frank Berninger. (2007). Interactions between morphological and physiological drought responses in Eucalyptus microtheca. Silva Fennica vol. 41 no. 2 article id 292. https://doi.org/10.14214/sf.292
Keywords: photosynthesis; chlorophyll fluorescence; root/shoot ratio; RuBP; xylem permeability
Abstract | View details | Full text in PDF | Author Info
We studied the response of Eucalyptus microtheca to drought in a greenhouse experiment. As a result of the drought the growth of the seedlings decreased and allocation patterns changed so that allocation to the roots increased. However, changes in photosynthesis and stomatal conductance under drought were rather modest. We showed, using chlorophyll fluorescence and measurements of photosynthesis under high CO2 that the biochemical capacity of photosynthesis increased under drought. The results suggest that changes in root/shoot ratio are the primary reactions that initiate a series of compensatory reactions that mitigate the effects of drought in Eucalyptus microtheca.
  • Susiluoto, University of Helsinki, Department of Forest Ecology, PL 27, 00014 University of Helsinki, Finland E-mail: sannamaija.susiluoto@helsinki.fi (email)
  • Berninger, Departement des Sciences biologiques, Université du Québec à Montréal, CP 8888 Succ Centre Ville, Montreal, Canada E-mail: fb@nn.ca
article id 291, category Research article
Yildiray Lise, Zeki Kaya, Fikret Isik, Rumi Sabuncu, Irfan Kandemir, Sertaç Önde. (2007). The impact of over-exploitation on the genetic structure of Turkish red pine (Pinus brutia Ten.) populations determined by RAPD markers. Silva Fennica vol. 41 no. 2 article id 291. https://doi.org/10.14214/sf.291
Keywords: Pinus brutia Ten.; RAPD-PCR; human over-exploitation; genetic structure; inbreeding
Abstract | View details | Full text in PDF | Author Info
To determine the possible impact of over-exploitation on the genetic structure of Turkish red pine (Pinus brutia Ten.) populations, three natural and three over-exploited (human degraded) populations of the species in the Mediterranean region of Turkey were investigated with Randomly Amplified Polymorphic DNA (RAPD). With the 80 RAPD primers tested, 12 of them yielded 137 polymorphic RAPD fragments. Four of the studied populations maintained unique fragments. The mean proportion of polymorphic fragments for all populations ranged from 89.8 to 98.9% and there were no significant differences between natural (94.8%) vs. over-exploited populations (92.7%). The estimated heterozygosity values suggested that Turkish red pine maintains high levels of genetic diversity (range 0.24–0.28) though studied populations and grouped ones as natural (He = 0.28) vs. over-exploited (0.27) did not differ significantly. The mean FST value indicated that the large portion of the total genetic diversity was within populations (93%), but this value was lower in the natural populations (92%) than in the over-exploited ones (94%). In over-exploited populations, excess of homozygosity was observed (about 6% higher) as compared to natural populations, indicating impacts of inbreeding in P. brutia.
  • Lise, Department of Biological Sciences, Middle East Technical University, 06531, Ankara, Turkey E-mail: yl@nn.tr
  • Kaya, Department of Biological Sciences, Middle East Technical University, 06531, Ankara, Turkey E-mail: kayaz@metu.edu.tr (email)
  • Isik, North Carolina State University, Raleigh, USA E-mail: fi@nn.us
  • Sabuncu, Southwest Anatolia Forest Research Institute, Antalya, Turkey E-mail: rs@nn.tr
  • Kandemir, Department of Biology, Zonguldak Karaelmas University, 67100, Zonguldak, Turkey E-mail: ik@nn.tr
  • Önde, Department of Biological Sciences, Middle East Technical University, 06531, Ankara, Turkey E-mail: so@nn.tr
article id 474, category Research article
Tero Heinonen, Mikko Kurttila, Timo Pukkala. (2007). Possibilities to aggregate raster cells through spatial optimization in forest planning. Silva Fennica vol. 41 no. 1 article id 474. https://doi.org/10.14214/sf.474
Keywords: threshold accepting; spatial optimisation; landscape metrics; old forest
Abstract | View details | Full text in PDF | Author Info
  • Heinonen, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: tero.heinonen@joensuu.fi (email)
  • Kurttila, Finnish Forest Research Institute, Joensuu Research Unit, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: mk@nn.fi
  • Pukkala, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: tp@nn.fi
article id 473, category Research article
Ulla Mattila, Tuula Nuutinen. (2007). Assessing the incidence of butt rot in Norway spruce in southern Finland. Silva Fennica vol. 41 no. 1 article id 473. https://doi.org/10.14214/sf.473
Keywords: Norway spruce; logistic regression; Heterobasidion; Butt rot; quality loss
Abstract | View details | Full text in PDF | Author Info
The aim of this study was to analyze the occurrence of butt rot damage to Norway spruce in different parts of southern Finland and to quantify the associated loss of quality. The data used in the study are from the 9th National Forest Inventory and consist of 5998 sample plots and 8007 spruce sample trees of saw-timber size. To predict the probability of damage to stands and trees, logistic regression models were constructed. Separate models were made for the whole study area, for the area where the general risk of Heterobasidion root and butt rot damage is high and for the area where the damage frequency is relatively low. In the high-risk area, the probability of damage decreased with increasing elevation and increased with increasing temperature sum. In addition, damage was more common on fertile sites and less common on peatlands; and thick peat layer decreased the risk of damage. The probability of damage was also higher in stands where special or selective cuttings had been carried out. In the sample tree data, the probability of damage increased slightly with increasing diameter and age of the tree. In the low-risk areas, elevation was the only variable that explained the probability of damage to a spruce tree. Site fertility and previous cuttings (more than ten years ago) explained the probability of damage to stands only weakly. For spruce damaged by butt rot, the saw-timber volume was reduced, on average, by 60% both in the high-risk area and in the low-risk area.
  • Mattila, The Finnish Forest Research Institute, Joensuu Unit, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: um@nn.fi (email)
  • Nuutinen, The Finnish Forest Research Institute, Joensuu Unit, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: tn@nn.fi
article id 309, category Research article
Sandhya Samarasinghe, Don Kulasiri, Tristan Jamieson. (2007). Neural networks for predicting fracture toughness of individual wood samples. Silva Fennica vol. 41 no. 1 article id 309. https://doi.org/10.14214/sf.309
Keywords: Pinus radiata; New Zealand; video imaging; strain energy release rate; Neural Networks; fracture toughness
Abstract | View details | Full text in PDF | Author Info
Strain energy release rate (GIc) of Pinus radiata in the TL opening mode was determined using the compliance crack length relationship. A total of 123 specimens consisting of four sizes of specimen with each size having four different crack lengths were tested. For each specimen, grain and ring angles, density and moisture content were measured. Video imaging, was used to measure crack length during propagation. Since cracks extended in stages, full compliance-crack length relationship was developed for each specimen based on their initial and subsequent crack lengths. No significant differences in GIc, between initial and subsequent crack lengths were found for the smaller specimens by paired sample t-tests, but differences were significant for the largest specimen size. The Average fracture toughness was calculated from GIc and it was 215 kPa.m0.5. Three artificial neural networks were developed to predict the: 1) force required to propagate a crack, 2) crack extension, and 3) fracture toughness of an individual specimen. Each was successful, producing respective R2 of 0.870, 0.865, and 0.621 on validation data. A sensitivity analysis of the networks revealed that the crack length was the most influential with 21% contribution followed by grain angle with 14% contribution for predicting the applied force. This was followed by volume and physical properties. For predicting the crack extension, density had the greatest contribution (20%) followed by previous crack length and force contributing 16% equally. Fracture toughness was dominated by the dimensional parameters of the specimen contributing (42%) followed by anisotropy and physical properties.
  • Samarasinghe, Centre for Advanced Computational Solutions (C-fACS), Lincoln University, New Zealand E-mail: ss@nn.nz (email)
  • Kulasiri, Centre for Advanced Computational Solutions (C-fACS), Lincoln University, New Zealand E-mail: dk@nn.nz
  • Jamieson, Centre for Advanced Computational Solutions (C-fACS), Lincoln University, New Zealand E-mail: tj@nn.nz
article id 308, category Research article
Ville Hallikainen, Mikko Hyppönen, Juha Hyvönen, Juhani Niemelä. (2007). Establishment and height development of harvested and naturally regenerated Scots pine near the timberline in North-East Finnish Lapland. Silva Fennica vol. 41 no. 1 article id 308. https://doi.org/10.14214/sf.308
Keywords: natural regeneration; seedling establishment; Scots pine; timberline; seed-tree method; density model; height development model
Abstract | View details | Full text in PDF | Author Info
Researchers and professionals in practical forestry have faced problems concerning the regeneration success of Scots pine in natural regeneration near the timberline in North-East Lapland. The aim of the study was to analyze the seedling establishment and seedling height development of Scots pine in seed-tree stands in the area. The average number of living pine seedlings in the study stands was about 1000 ha–1, but there was considerable variation between the stands. The seedling density was modelled using a multinomial logistic regression with a random factor. Forest site type and the time since seed-tree cutting were the most significant explanatory variables in the model. The probability of reaching the acceptable seedling density was higher on dry site types than on the more fertile ones. The probability increased with the time elapsed since the regeneration activities. Effective temperature sum and the number of intermediate pines also positively affected the probability, but the presence of residual trees negatively. On northern and eastern slopes the probability was lower than on southern and western ones. Seedling height was modelled using a linear mixed model. The age of a dominant seedling was the most positively effective explanatory variable in the height development model. Other positively affecting significant predictors were time since seed-tree cutting, number of intermediate birches, and distance between a seedling and the nearest seed tree. Degree of paludification had a negative effect. The study suggests that the regeneration of Scots pine in North-East Lapland is a relatively slow process.
  • Hallikainen, Finnish Forest Research Institute, Rovaniemi Research Unit, P.O. Box 16, FI-96301 Rovaniemi, Finland E-mail: ville.hallikainen@metla.fi (email)
  • Hyppönen, Finnish Forest Research Institute, Rovaniemi Research Unit, P.O. Box 16, FI-96301 Rovaniemi, Finland E-mail: mikko.hypponen@metla.fi
  • Hyvönen, Finnish Forest Research Institute, Rovaniemi Research Unit, P.O. Box 16, FI-96301 Rovaniemi, Finland E-mail: juha.hyvonen@metla.fi
  • Niemelä, Finnish Forest Research Institute, Rovaniemi Research Unit, P.O. Box 16, FI-96301 Rovaniemi, Finland E-mail: jn@nn.fi
article id 307, category Research article
Jacqueline C. Bolli, Andreas Rigling, Harald Bugmann. (2007). The influence of changes in climate and land-use on regeneration dynamics of Norway spruce at the treeline in the Swiss Alps. Silva Fennica vol. 41 no. 1 article id 307. https://doi.org/10.14214/sf.307
Keywords: tree growth; dendroecology; microsites; subalpine meadow succession; tree invasion
Abstract | View details | Full text in PDF | Author Info
Recent changes of climate and land-use are often regarded to affect the European Alpine region substantially and to trigger an increase in the elevation of the upper treeline. The patterns of tree invasion on a subalpine meadow at 1900 m a.s.l. in Sedrun, Canton Grisons, Switzerland, were studied in order 1) to reconstruct the process of tree establishment and tree–growth dynamics in space and time, and 2) to evaluate the influence of site properties, land-use change and climate on these processes. Dendroecological analysis of 105 Norway spruce combined with an assessment of 48 vegetation plots and 17 soil profiles revealed that the trees were established in one main period (1965–1980s), starting 15 years after the abandonment of the agricultural use of the meadow, and that there is a pronounced environmental gradient along the forest-meadow ecotone. Tree establishment and height growth were favoured close to the former forest edge, but all saplings irrespective of their distance to the forest edge and their age showed increased radial growth since 1990, coinciding with a period of higher summer temperatures in the region. Therefore, we conclude that the observed tree-line dynamics in Sedrun are the result of both land-use and climate change: Tree establishment was triggered by the abandonment of the agricultural use of the meadow, and strongly favoured by particularly good growing conditions in a warm decade, which illustrates the sensitivity of conifers near the alpine tree-line to temperature fluctuations.
  • Bolli, Swiss Federal Research Institute, Zürcherstrasse 111, CH-8903 Birmensdorf, Switzerland E-mail: jacqueline.bolli@wsl.ch (email)
  • Rigling, Swiss Federal Research Institute, Zürcherstrasse 111, CH-8903 Birmensdorf, Switzerland E-mail: ar@nn.ch
  • Bugmann, Swiss Federal Institute of Technology (ETH) Zürich, Universitätstrasse 16, CH-8092 Zürich, Switzerland E-mail: hb@nn.ch
article id 306, category Research article
Niina Tanskanen, Hannu Ilvesniemi. (2007). Spatial distribution of fine roots at ploughed Norway spruce forest sites. Silva Fennica vol. 41 no. 1 article id 306. https://doi.org/10.14214/sf.306
Keywords: Picea abies; forest soil; fine roots; ploughing; spatial distribution; specific root length; understorey roots
Abstract | View details | Full text in PDF | Author Info
We examined the spatial distribution of fine roots at two forest sites that were ploughed 20 (site K1) and 33 years (site K2) before sampling and planted with Norway spruce (Picea abies (L.) Karst.) seedlings. Soil core samples were taken from the tilt and beneath the tilt, the furrow and the intermediate undisturbed soil to a depth of 0.4 m for fine root biomass, length and necromass determinations. Norway spruce fine roots were found throughout the ploughed forest sites. The fine roots were, however, unevenly distributed: the fine root biomass was highest in the tilt (624 and 452 g m–2 at sites K1 and K2, respectively) and lowest in the undisturbed soil at site K1 (79 g m–2) and in the furrow at site K2 (145 g m–2). The estimated average fine root biomass at the ploughed forest sites (268 and 248 g m–2 at sites K1 and K2, respectively) was, however, similar to those presented in other studies concerning sites that had not been ploughed. In the tilt, a substantial proportion of the fine roots was in the inverted mineral soil horizons and in the new organic horizon above the tilt. Consistent with the fine root biomass findings, the Norway spruce necromass was highest in the tilt but the vertical distribution of the dead roots was different: the necromass was highest in the buried OBT horizon. The results of this study suggest that at the ploughed forest sites, a substantial part of Norway spruce nutrient and water uptake occured in the tilt during the first 20 or 33 years after plantation.
  • Tanskanen, Department of Forest Ecology, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: niina.tanskanen@helsinki.fi (email)
  • Ilvesniemi, Finnish Forest Research Institute, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: hi@nn.fi
article id 305, category Research article
Anna-Maria Veijalainen, Marja-Liisa Juntunen, Arja Lilja, Helvi Heinonen-Tanski, Leo Tervo. (2007). Forest nursery waste composting in windrows with or without horse manure or urea – the composting process and nutrient leaching. Silva Fennica vol. 41 no. 1 article id 305. https://doi.org/10.14214/sf.305
Keywords: microbial hygiene; lignocellulose; nutrients; organic matter decomposition; temperature; tree seedling waste; waste management
Abstract | View details | Full text in PDF | Author Info
In order to find the best management practices for forest nursery waste composting, organic waste was composted without or with horse manure or urea in six windrows for two years. The windrows were built in four consecutive years during 1999–2002. In 1999, no extra-nutrients were added to the windrow (N99). In 2000, urea fertilizer was used as a nitrogen source (U00). Despite this, the process did not function properly. In 2001, two windrows were built, one (H01) with and the other (N01) without horse manure. Horse manure slightly accelerated the heating process. Consequently, two windrows with more horse manure were built in 2002. One was aerated passively (H02) as earlier windrows, and the other was aerated forcedly (HA02). Horse manure and forced aeration were needed to keep the temperature above 55°C for long enough to ensure microbial hygiene of the material. The degradation of cellulose was greater during the curing stage. Nutrient leaching was low, although the additives increased leaching in conjunction with the inefficient process. The results showed that forest nursery waste alone is ineffective at raising the temperature of the compost, and degrades slowly due to its low nutrient and easily available carbon content. The best management practice for forest nursery waste composting is to use horse manure and aeration to ensure the heating process. Environmental contamination can be avoided by collecting the leachates. Further research is needed to evaluate the usability of the compost.
  • Veijalainen, Finnish Forest Research Institute, FI-77600 Suonenjoki, Finland E-mail: amv@nn.fi (email)
  • Juntunen, Finnish Forest Research Institute, FI-77600 Suonenjoki, Finland E-mail: mlj@nn.fi
  • Lilja, Finnish Forest Research Institute, PO Box 18, FI-01301 Vantaa, Finland E-mail: al@nn.fi
  • Heinonen-Tanski, Univ. of Kuopio, Dept. of Environm. Sc., PO Box 1627, FI-70211 Kuopio, Finland E-mail: hht@nn.fi
  • Tervo, Finnish Forest Research Institute, FI-77600 Suonenjoki, Finland E-mail: lt@nn.fi
article id 304, category Research article
Joanna Kosinska, Andrzej Lewandowski, Wladyslaw Chalupka. (2007). Genetic variability of Scots pine maternal populations and their progenies. Silva Fennica vol. 41 no. 1 article id 304. https://doi.org/10.14214/sf.304
Keywords: Pinus sylvestris L.; genetic variation; allozymes; gene conservation
Abstract | View details | Full text in PDF | Author Info
The genetic variability of Scots pine was investigated in six populations from Poland representing two maternal populations and their natural and artificial progenies. Thirteen enzyme systems controlled by 25 allozyme loci were analyzed using starch gel electrophoresis. Progeny populations maintained a high and similar level of genetic variation to that observed in the maternal populations. As expected, much closer genetic relationships were observed between maternal populations and their respective progeny than between the two maternal populations themselves. Progeny populations had the same major alleles, but differed in the number of rare alleles. Therefore, probably not all rare alleles were transferred from the maternal stands to the progenies. In addition, new rare alleles appeared in the progeny populations, possibly as a result of external pollen flow into the maternal populations.
  • Kosinska, Department of Human Medical Genetics, Medical University of Warsaw, Oczki 1, 02-007 Warsaw, Poland E-mail: jk@nn.pl
  • Lewandowski, Polish Academy of Sciences, Institute of Dendrology, 62-035 Kórnik, Poland E-mail: al@nn.pl (email)
  • Chalupka, Polish Academy of Sciences, Institute of Dendrology, 62-035 Kórnik, Poland E-mail: wc@nn.pl

Category : Review article

article id 313, category Review article
Heikki Hänninen, Koen Kramer. (2007). A framework for modelling the annual cycle of trees in boreal and temperate regions. Silva Fennica vol. 41 no. 1 article id 313. https://doi.org/10.14214/sf.313
Keywords: frost hardiness; climatic adaptation; bud burst; climatic change; dormancy; phenology; photosynthetic capacity
Abstract | View details | Full text in PDF | Author Info
Models of the annual development cycle of trees in boreal and temperate regions were reviewed and classified on the basis of their ecophysiological assumptions. In our classification we discern two main categories of tree development: 1) fixed sequence development, which refers to irreversible ontogenetic development leading to visible phenological events such as bud burst or flowering, and 2) fluctuating development, which refers to reversible physiological phenomena such as the dynamics of frost hardiness during winter. As many of the physiological phenomena are partially reversible, we also describe integrated models, which include aspects of both fixed-sequence and fluctuating development. In our classification we further discern simple E-models, where the environmental response stays constant, and more comprehensive ES-models, where the environmental response changes according to the state of development. On the basis of this model classification, we have developed an operational modelling framework, in which we define an explicit state variable and a corresponding rate variable for each attribute of the annual cycle considered. We introduce a unifying notation, which we also use when presenting a selection of previously published models. To illustrate the various developmental phenomena and their modelling, we have carried out model simulations. Finally, we discuss the ecophysiological interpretation of the model variables, methodological aspects of the empirical development and testing of the models, the introduction of new aspects to the modelling, other closely related models, and applications of the models.
  • Hänninen, Plant Ecophysiology and Climate Change Group (PECC), Department of Biological and Environmental Sciences, Box 65, FI-00014 University of Helsinki, Finland E-mail: heikki.hanninen@helsinki.fi (email)
  • Kramer, Alterra, P.O. Box 47, 6700 AA Wageningen, The Netherlands E-mail: kk@nn.nl
article id 312, category Review article
Katja Lähtinen. (2007). Linking resource-based view with business economics of woodworking industry: earlier findings and future insights. Silva Fennica vol. 41 no. 1 article id 312. https://doi.org/10.14214/sf.312
Keywords: strategy; competitiveness; enterprises; resources; woodworking firms
Abstract | View details | Full text in PDF | Author Info
The business environment and sources of competitiveness in the woodworking industry have changed notably since the 1990s. Wood products are traded globally, and with the increase of trade, abundant forest resources are no longer the main source of sustainable competitiveness. Competition within the woodworking industry is increasing both between European and non-European enterprises, as well as within the EU. Capability to create value-added, making rational strategic choices, and creative usage of intangible and tangible resources have been emphasized as crucial for sustaining woodworking industry competitiveness in higher cost-level countries. Resource-based view (RBV) defines the availability of intangible assets, capabilities and tangible resources, and their heterogeneous combination to form the basis for company success. The objective of this review is to examine the possibilities to employ the RBV to the study of the woodworking industry by combining existing empirical results of the factors of companies’ competitiveness with assessment of the RBV. In the existing literature, strategies implemented in woodworking companies have been approached rather widely, while the role of intangible and tangible resources in building firm-level success has received less focus. In addition, a significant gap exists in linking firms’ financial accounting information with empirical data on their resource-usage and business strategies. In future studies, more information of the effects of these strategic elements on the actual business success of the firms would be needed.
  • Lähtinen, Finnish Forest Research Institute, Joensuu Research Unit, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: katja.lahtinen@metla.fi (email)

Category : Research note

article id 927, category Research note
Risto Jalkanen, Carmen Büttner, Susanne von Bargen. (2007). Cherry leaf roll virus abundant on Betula pubescens in Finland. Silva Fennica vol. 41 no. 4 article id 927. https://doi.org/10.14214/sf.927
Keywords: Betula pendula; Betula nana; Betula pubescens subsp. czerepanovii; virology
Abstract | View details | Full text in PDF | Author Info
Virus-related symptoms such as vein banding, leaf roll, chlorosis and subsequent necrosis on birch leaves were increasingly recorded throughout Finland since 2002. They are widespread in this country and have also been detected in northern Norway and Sweden. Symptomatic foliage has so far been found on Betula pendula, B. pubescens, B. pubescens subsp. czerepanovii, and B. nana. A Cherry leaf roll virus (CLRV) specific IC-RT-PCR was applied to young leaves, buds and catkins of symptomatic shoots of nineteen pubescent and one silver birch trees grown in the centre of Rovaniemi, Finland. CLRV was found in seventeen B. pubescens trees. This is the first time that B. pubescens has been confirmed to be a host species for CLRV in Finland. Nor has CLRV been recorded earlier in northern Finland.
  • Jalkanen, Finnish Forest Research Institute, Rovaniemi Research Unit, P.O. Box 16, FI-96301 Rovaniemi, Finland E-mail: risto.jalkanen@metla.fi (email)
  • Büttner, Humboldt Universität zu Berlin, Institut für Gartenbauwissenschaften, Fachgebiet Phytomedizin, Lentzeallee 55/57, 14195 Berlin, Germany E-mail: Carmen.Buettner@agrar.hu-berlin.de
  • Bargen, Humboldt Universität zu Berlin, Institut für Gartenbauwissenschaften, Fachgebiet Phytomedizin, Lentzeallee 55/57, 14195 Berlin, Germany E-mail: susanne.von.bargen@agrar.hu-berlin.de
article id 470, category Research note
Paula Jylhä, Juha Laitila. (2007). Energy wood and pulpwood harvesting from young stands using a prototype whole-tree bundler. Silva Fennica vol. 41 no. 4 article id 470. https://doi.org/10.14214/sf.470
Keywords: productivity; energy wood; pulpwood; bundling; integrated harvesting; Fixteri
Abstract | View details | Full text in PDF | Author Info
The productivity of cutting and bundling whole trees using the first prototype of a bundle-harvester comprised of a harwarder as the base machine, an accumulating felling head, and a compacting device was studied in three young stands in order to facilitate the further development of the concept. In addition, the removal and its composition were studied as a means of laying the foundations for developing methods for work rating and measurement on delivery. Bundling enables in-depth integration of pulpwood and energy wood procurement. Both energy wood (crown biomass) and pulpwood can be incorporated into the same bundles, and the subsequent separation of these fractions takes place at the debarking phase at the pulpmill. Bundle-harvesting productivities were relatively low (2.8–3.7 m3/E0-h) when compared to current harvesting technology. Improving working techniques, machine structure, and components showed great potential for increasing the efficiency of the concept. The bundles were dimensionally uniform. Their solid volume varied between 0.350 m3 and 0.513 m3, depending on the bundle assortment and stand properties. Integrating energy wood harvesting with pulpwood harvesting increased removal even by 59 per cent.
  • Jylhä, Finnish Forest Research Institute, Kannus Research Unit, P.O. Box 44, FI-69101 Kannus, Finland E-mail: paula.jylha@metla.fi (email)
  • Laitila, Finnish Forest Research Institute, Joensuu Research Unit, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: jl@nn.fi
article id 311, category Research note
Dan Bergström, Urban Bergsten, Tomas Nordfjell, Tomas Lundmark. (2007). Simulation of geometric thinning systems and their time requirements for young forests. Silva Fennica vol. 41 no. 1 article id 311. https://doi.org/10.14214/sf.311
Keywords: bioenergy; forest technology; multi-stem
Abstract | View details | Full text in PDF | Author Info
In Fennoscandia, large areas that have not been subjected to pre-commercial thinning (PCT), and thus support dense stands, are becoming suitable for harvesting biomass. However, efficient systems for harvesting biomass from young stands have not yet been developed. In order to optimise biomass harvesting it is here hypothesized that the handling unit should not be a single tree but a corridor area, i.e., all trees in a specific area should be harvested in the same crane movement cycle. Three types of corridor harvesting approaches (using accumulating felling heads for geometric harvesting in two different patterns) were compared in terms of time required to fell a corridor of standardised size. Corridors are defined as strips of harvested areas between conventional strip-roads. Harvests were simulated in two types of stands, first thinning (FT) and delayed PCT stands, in which the spatial positions of the trees had been mapped. The differences in simulated time consumption per corridor were minor when the only variable changed was the corridor pattern. However, there were ca. 2-fold and 3-fold differences in simulated time consumption per corridor between the harvesting approaches for the FT stand and the PCT-stand, respectively. Furthermore, area handling (felling head accumulating all trees corridor-wise, with no restrictions on the accumulated number of trees except for a certain load limit) was found to give up to 2.4-fold increases in productivity compared to a single-tree (reference) approach for the FT stand. In conclusion, the simulation results clearly show the benefits of applying area-harvesting systems in young, dense stands.
  • Bergström, SLU, Dept. of Forest Resource Management, SE-901 83 Umeå, Sweden E-mail: db@nn.se (email)
  • Bergsten, SLU, Dept. of Forest Ecology and Management, SE-901 83 Umeå, Sweden E-mail: ub@nn.se
  • Nordfjell, SLU, Dept. of Forest Resource Management, SE-901 83 Umeå, Sweden E-mail: tn@nn.se
  • Lundmark, SLU, Vindeln Experimental Forests, Svartberget Field Station, SE-922 91 Vindeln, Sweden E-mail: tl@nn.se
article id 310, category Research note
Timo Tahvanainen, Kalle Kaartinen, Timo Pukkala, Matti Maltamo. (2007). Comparison of approaches to integrate energy wood estimation into the Finnish compartment inventory system. Silva Fennica vol. 41 no. 1 article id 310. https://doi.org/10.14214/sf.310
Keywords: diameter distribution; thinnings; calibration estimation; compartment inventory
Abstract | View details | Full text in PDF | Author Info
The harvesting of energy wood from young stands is increasing as the demand for renewable wood fuel is growing. Energy wood consists of stems, tree tops, branches and needles, depending on the size of the trees and the logging method used. The current forest inventory and planning systems used in private forests in Finland do not produce estimates of energy wood components. In stands typical for energy wood harvesting, a large share of energy wood consists of trees smaller than the minimum size for pulpwood. In this study, energy wood was included into the calculation system of compartment inventory, and a procedure for simulating the thinning treatments in young stands was developed. The results for six inventory alternatives and prediction of energy wood were compared with the use of inventory material from 37 young stands that have plenty of energy wood. The measurement of additional stand characteristics and the use of a calibration estimation method was tested, as well as the use of plot-level inventory data instead of stand level data. The results showed that the measurement of the number of trees per hectare, in addition to stand basal area and mean diameter, improved the energy wood estimates. The additional minimum and maximum diameters improved the precision of the estimates, but did not affect bias. The removal estimates were more precise when plot-level data was used, rather than stand-level data. The removal estimates were higher with plot-level data. The results suggest that, in heterogeneous young stands, plot by plot prediction would give more accurate removal estimates than the calculation of a corresponding prediction at the stand-level.
  • Tahvanainen, Finnish Forest Research Institute, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: timo.tahvanainen@metla.fi (email)
  • Kaartinen, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuun yliopisto, Finland E-mail: kk@nn.fi
  • Pukkala, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuun yliopisto, Finland E-mail: tp@nn.fi
  • Maltamo, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuun yliopisto, Finland E-mail: mm@nn.fi

Register
Click this link to register to Silva Fennica.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles